Re: Tapering spiral
Thanks -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Tapering spiral
Yes Study the pictures, it shows you lathe as well as milling use. Just make sure you are able to use the same mount or chuck accurately on both machines. The flame point was left strong and I finished them to a point with a dremmel off the machines. Mike OK On 3/12/2018 11:41 AM, Patrick Salter wrote: I had seen this and it is definitely on my to-do list. My biggest problem is doing the flame part. I would do the base on the lathe but would I then turn the rough shape of the flame? Leaving the piece in my chuck, mount in the legacy to do the three sides? -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: Tapering spiral
I had seen this and it is definitely on my to-do list. My biggest problem is doing the flame part. I would do the base on the lathe but would I then turn the rough shape of the flame? Leaving the piece in my chuck, mount in the legacy to do the three sides? -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: Tapering spiral
Thank you I’m slowly coming back Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis Sent: Monday, 12 March 2018 6:49 PM To: Legacy Ornamental Mills Subject: Re: Tapering spiral Thanks Bill That is the very one I was looking for. I am going through all the old posts and if there are good "How to's " I print them off and place into a folder. I did make my own type of Shopsmith duplicator, but it went with a lathe that was sold. Will have to make another !! Nice to see you back Bill Regards Richard On Monday, March 12, 2018 at 12:21:02 AM UTC, aussiman wrote: http://ornamentalmills.com/mike_pung/flame_finial/flame_finials.html Bill From: legacy-orna...@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com ] On Behalf Of MAX LATHAM Sent: Monday, 12 March 2018 5:03 AM To: legacy-orna...@googlegroups.com Subject: Re: Tapering spiral And I'd like to see that link as I need to finish a pencil bed frame with a finial. thanks guys for the almost continuous education max _ From: legacy-orna...@googlegroups.com > on behalf of Richard Ellis > Sent: Sunday, March 11, 2018 11:49 AM To: Legacy Ornamental Mills Subject: Tapering spiral Hi All A while ago I came across an old post by Mike showing some pointed and spiral finals that he made . Search as I may I just can't find it again anyone know how to get to it again. Richard -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-orna...@googlegroups.com . Visit this group at https://groups.google.com/group/legacy-ornamental-mills. <https://groups.google.com/group/legacy-ornamental-mills> Google Groups groups.google.com Google Groups allows you to create and participate in online forums and email-based groups with a rich experience for community conversations. For more options, visit https://groups.google.com/d/optout. <https://groups.google.com/d/optout> Google Groups groups.google.com Google Groups allows you to create and participate in online forums and email-based groups with a rich experience for community conversations. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-orna...@googlegroups.com . Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Tapering spiral
Thanks Bill That is the very one I was looking for. I am going through all the old posts and if there are good "How to's " I print them off and place into a folder. I did make my own type of Shopsmith duplicator, but it went with a lathe that was sold. Will have to make another !! Nice to see you back Bill Regards Richard On Monday, March 12, 2018 at 12:21:02 AM UTC, aussiman wrote: > > > > http://ornamentalmills.com/mike_pung/flame_finial/flame_finials.html > > > > Bill > > *From:* legacy-orna...@googlegroups.com [mailto: > legacy-ornamental-mills@googlegroups.com ] *On Behalf Of *MAX > LATHAM > *Sent:* Monday, 12 March 2018 5:03 AM > *To:* legacy-orna...@googlegroups.com > *Subject:* Re: Tapering spiral > > > > And I'd like to see that link as I need to finish a pencil bed frame with > a finial. > > thanks guys for the almost continuous education > > max > > > -- > > *From:* legacy-orna...@googlegroups.com < > legacy-orna...@googlegroups.com > on behalf of Richard Ellis > > > *Sent:* Sunday, March 11, 2018 11:49 AM > *To:* Legacy Ornamental Mills > *Subject:* Tapering spiral > > > > Hi All > > A while ago I came across an old post by Mike showing some pointed and > spiral finals that he made . Search as I may I just can't find it again > anyone know how to get to it again. > > Richard > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com > . > To post to this group, send email to legacy-orna...@googlegroups.com > . > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > > Google Groups <https://groups.google.com/group/legacy-ornamental-mills> > > groups.google.com > > Google Groups allows you to create and participate in online forums and > email-based groups with a rich experience for community conversations. > > > For more options, visit https://groups.google.com/d/optout. > > Google Groups <https://groups.google.com/d/optout> > > groups.google.com > > Google Groups allows you to create and participate in online forums and > email-based groups with a rich experience for community conversations. > > > > > > > <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > > Virus-free. www.avg.com > <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> > > > -- > You received this message because you are subscribed to the Google Groups > "Legacy Ornamental Mills" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to legacy-ornamental-mills+unsubscr...@googlegroups.com > . > To post to this group, send email to legacy-orna...@googlegroups.com > . > Visit this group at > https://groups.google.com/group/legacy-ornamental-mills. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: Tapering spiral
http://ornamentalmills.com/mike_pung/flame_finial/flame_finials.html Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of MAX LATHAM Sent: Monday, 12 March 2018 5:03 AM To: legacy-ornamental-mills@googlegroups.com Subject: Re: Tapering spiral And I'd like to see that link as I need to finish a pencil bed frame with a finial. thanks guys for the almost continuous education max _ From: legacy-ornamental-mills@googlegroups.com on behalf of Richard Ellis Sent: Sunday, March 11, 2018 11:49 AM To: Legacy Ornamental Mills Subject: Tapering spiral Hi All A while ago I came across an old post by Mike showing some pointed and spiral finals that he made . Search as I may I just can't find it again anyone know how to get to it again. Richard -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. <https://groups.google.com/group/legacy-ornamental-mills> Google Groups groups.google.com Google Groups allows you to create and participate in online forums and email-based groups with a rich experience for community conversations. For more options, visit https://groups.google.com/d/optout. <https://groups.google.com/d/optout> Google Groups groups.google.com Google Groups allows you to create and participate in online forums and email-based groups with a rich experience for community conversations. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> Virus-free. <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient> www.avg.com -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Tapering spiral
Sorry guys I meant to say, Cutting a Rope on a Tapper... C.A.G. On Sunday, March 11, 2018 5:57 PM, 'Curt George' via Legacy Ornamental Mills wrote: HelloI can not answer for what Mike did. But I have a good method to cut on a tapper that has served me well. Cut form the side for the spindle using a template, and a side cutting router bit.. (you could also use a ball bearing on a router bit riding on the side of a spindle, but this method has its own draw backs, due to the bearing falling into a grove that was already cut.ruining the part...)Any of these Magnate bits will do a good job cutting form the side to make a rope..http://www.magnate.net/SearchResults.asp?Cat=900224 http://www.magnate.net/SearchResults.asp?Cat=900158 http://www.magnate.net/SearchResults.asp?Cat=900159 NOW if you want to experiment on new ideas. Try this "Pung" idea. https://www.youtube.com/watch?v=nh1JTcyLWOI I Hope this helps? Talk to you all more latter. C.A.G. On Sunday, March 11, 2018 2:03 PM, MAX LATHAM wrote: #yiv9702660694 -- P {margin-top:0;margin-bottom:0;}#yiv9702660694 And I'd like to see that link as I need to finish a pencil bed frame with a finial.thanks guys for the almost continuous educationmax From: legacy-ornamental-mills@googlegroups.com on behalf of Richard Ellis Sent: Sunday, March 11, 2018 11:49 AM To: Legacy Ornamental Mills Subject: Tapering spiral Hi AllA while ago I came across an old post by Mike showing some pointed and spiral finals that he made . Search as I may I just can't find it again anyone know how to get to it again.Richard-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email tolegacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. | Google Groupsgroups.google.comGoogle Groups allows you to create and participate in online forums and email-based groups with a rich experience for community conversations. | For more options, visit https://groups.google.com/d/optout. | Google Groupsgroups.google.comGoogle Groups allows you to create and participate in online forums and email-based groups with a rich experience for community conversations. | -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Tapering spiral
HelloI can not answer for what Mike did. But I have a good method to cut on a tapper that has served me well. Cut form the side for the spindle using a template, and a side cutting router bit.. (you could also use a ball bearing on a router bit riding on the side of a spindle, but this method has its own draw backs, due to the bearing falling into a grove that was already cut.ruining the part...)Any of these Magnate bits will do a good job cutting form the side to make a rope..http://www.magnate.net/SearchResults.asp?Cat=900224 http://www.magnate.net/SearchResults.asp?Cat=900158 http://www.magnate.net/SearchResults.asp?Cat=900159 NOW if you want to experiment on new ideas. Try this "Pung" idea. https://www.youtube.com/watch?v=nh1JTcyLWOI I Hope this helps? Talk to you all more latter. C.A.G. On Sunday, March 11, 2018 2:03 PM, MAX LATHAM wrote: #yiv2243078666 #yiv2243078666 -- P {margin-top:0;margin-bottom:0;}#yiv2243078666 And I'd like to see that link as I need to finish a pencil bed frame with a finial.thanks guys for the almost continuous educationmax From: legacy-ornamental-mills@googlegroups.com on behalf of Richard Ellis Sent: Sunday, March 11, 2018 11:49 AM To: Legacy Ornamental Mills Subject: Tapering spiral Hi AllA while ago I came across an old post by Mike showing some pointed and spiral finals that he made . Search as I may I just can't find it again anyone know how to get to it again.Richard-- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email tolegacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. | Google Groupsgroups.google.comGoogle Groups allows you to create and participate in online forums and email-based groups with a rich experience for community conversations. | For more options, visit https://groups.google.com/d/optout. | Google Groupsgroups.google.comGoogle Groups allows you to create and participate in online forums and email-based groups with a rich experience for community conversations. | -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: Tapering spiral
And I'd like to see that link as I need to finish a pencil bed frame with a finial. thanks guys for the almost continuous education max From: legacy-ornamental-mills@googlegroups.com on behalf of Richard Ellis Sent: Sunday, March 11, 2018 11:49 AM To: Legacy Ornamental Mills Subject: Tapering spiral Hi All A while ago I came across an old post by Mike showing some pointed and spiral finals that he made . Search as I may I just can't find it again anyone know how to get to it again. Richard -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>. To post to this group, send email to legacy-ornamental-mills@googlegroups.com<mailto:legacy-ornamental-mills@googlegroups.com>. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. Google Groups<https://groups.google.com/group/legacy-ornamental-mills> groups.google.com Google Groups allows you to create and participate in online forums and email-based groups with a rich experience for community conversations. For more options, visit https://groups.google.com/d/optout. Google Groups<https://groups.google.com/d/optout> groups.google.com Google Groups allows you to create and participate in online forums and email-based groups with a rich experience for community conversations. -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Tapering spiral
Hi All A while ago I came across an old post by Mike showing some pointed and spiral finals that he made . Search as I may I just can't find it again anyone know how to get to it again. Richard -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at https://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.