Internet how
much of it is unrelated to our personal hardware or software.
Gary
- Original Message -
From: "ronald ferguson" <[EMAIL PROTECTED]>
To:
Sent: Monday, May 26, 2008 1:13 AM
Subject: RE: [LegacyUG] v7 update to 7.0.0.38
Jessica,
Re: your last paragraph.
I
ECTED]
> To: LegacyUserGroup@legacyfamilytree.com
> Subject: Re: [LegacyUG] v7 update to 7.0.0.38
>
> I went through over a dozen emails completely not relevant to my
> question to find this one again and reply to it.
> Thank you Bob for you input/advice. I thought that by using Re
ginal Message - From: "Jessica Morgan" <[EMAIL PROTECTED]>
> To:
> Sent: Saturday, May 24, 2008 11:47 AM
> Subject: Re: [LegacyUG] v7 update to 7.0.0.38
>
>
>> I knew I would open a can of worms by asking my question, and
>> seriously hesitated to do
L PROTECTED]> To:
LegacyUserGroup@legacyfamilytree.com> Subject: Re: [LegacyUG] v7 update to
7.0.0.38> > I knew I would open a can of worms by asking my question, and>
seriously hesitated to do so! I apologize. There were more responses> to my
question that were whining than helpf
ce as you and
then got it to work.
Good luck,
Bob
- Original Message -
From: "Jessica Morgan" <[EMAIL PROTECTED]>
To:
Sent: Saturday, May 24, 2008 11:47 AM
Subject: Re: [LegacyUG] v7 update to 7.0.0.38
I knew I would open a can of worms by asking my question, and
seri
Wynthner wrote:
If that is the case then it is time for that complete re-write of Legacy.
To require a program be installed on a computer just to use some
control in it for another program is absurd in the extreme..
especially if that program is a second rate browser from Microsoft!
I think y
I just received mine yesterday...Maybe soon...
Charlotte Hay
- Original Message -
From: John Carter
To: LegacyUserGroup@legacyfamilytree.com
Sent: Saturday, May 24, 2008 10:50 AM
Subject: RE: [LegacyUG] v7 update to 7.0.0.38
Perhaps because of shipping time to where you are? I would
I knew I would open a can of worms by asking my question, and
seriously hesitated to do so! I apologize. There were more responses
to my question that were whining than helpful ideas.
I purchased v 6 in July 2007, and thus is why I received v 7 in the
first wave, I'd wager.
For those of you that do
y to be patient.
Rich in LA CA
- Original Message
From: Thomas Herson <[EMAIL PROTECTED]>
To: LegacyUserGroup@legacyfamilytree.com
Sent: Friday, May 23, 2008 7:59:08 PM
Subject: Re: [LegacyUG] v7 update to 7.0.0.38
I'm not sure I understand why version 7 hasn't been made avai
From: Mark Lang <[EMAIL PROTECTED]>
To: LegacyUserGroup@legacyfamilytree.com
Sent: Saturday, May 24, 2008 12:20:58 AM
Subject: RE: [LegacyUG] v7 update to 7.0.0.38
No. I have FF as my default browser. There is just a control that is in IE7
that makes everything work. I have IE7 installe
Thank you Sherry.
Declan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of
Sherry/Support
Sent: 24 May 2008 14:55
To: LegacyUserGroup@legacyfamilytree.com
Subject: RE: [LegacyUG] v7 update to 7.0.0.38
Sales is still shipping hopefully they'll hav
When replying to this message, please include all previous correspondence.
Thanks.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of decfam
Sent: Saturday, May 24, 2008 6:07 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: RE: [LegacyUG] v7 update to 7.0.0.38
Perhaps because of shipping time to where you are? I would expect that
users in North America might have received the CD before UK or NZ users
because they are closer to the source ;-)
John
> Why dont I have legacy 7 yet as I purchased v6 and was told I would get v7
> free. Others seem to have i
: [Might be spam] Re: [LegacyUG] v7 update to 7.0.0.38
Did you purchase it from the website? I bought mine from Goeff at a
Saturday meeting where he was the speaker. Perhaps my purchase didn't make
it into the hands who prepared the shipping list. I've been anxiously
awaiting it as w
lto:[EMAIL PROTECTED] On Behalf Of Thomas
Herson
Sent: Saturday, May 24, 2008 6:15 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] v7 update to 7.0.0.38
Geoff,
Any guess as to when the Source Converter will be working?
Thanks,
Tom
- Original Message -
From: "Geoff Ras
mussen
> Sent: 24 May 2008 13:43
> To: LegacyUserGroup@legacyfamilytree.com
> Subject: RE: [LegacyUG] v7 update to 7.0.0.38
>
>
> We're shooting for the first week of June.
>
> Thanks,
>
> Geoff Rasmussen
> Millennia Corporation
> [EMAIL PROTECTED]
> www.LegacyFa
they
> are just dedicated
> users that help people less experienced in using Legacy like me and you.
>
> {I bow to the royalty as I leave the room to make she who must be obeyed a
> cuppa}> From:
> [EMAIL PROTECTED]>
To: LegacyUserGroup@legacyfamilytree.com> Sub
Hugh Busey
Sent: Saturday, May 24, 2008 6:14 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] v7 update to 7.0.0.38
Geoff,
I bought a second copy of V.6 at your seminar on Cape Cod last October in
order to get on the V.7 queue. Since I haven't received V.7 yet, I a
Millennia Corporation
> [EMAIL PROTECTED]
> www.LegacyFamilyTree.com
>
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Allen
> Prunty
> Sent: Saturday, May 24, 2008 4:27 AM
> To: LegacyUserGroup@legacyfamilytree.com
> Subject: Re: [L
008 11:51 PM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] v7 update to 7.0.0.38
The Legacy Home Page inside Legacy only works with IE too, nothing new.
Also in Research Guidance. Don't know why they even bother asking for
'default browser' in Customize. Even
Geoff,
Any guess as to when the Source Converter will be working?
Thanks,
Tom
- Original Message -
From: "Geoff Rasmussen" <[EMAIL PROTECTED]>
To:
Sent: Saturday, May 24, 2008 8:43 AM
Subject: RE: [LegacyUG] v7 update to 7.0.0.38
We're shooting for t
2008 4:27 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] v7 update to 7.0.0.38
Geoff...
When are your "Legacy" -- Legacy users going to see v7? It seems like the
New User Crowd is getting priority over your long time, faithful supportiv
Group@legacyfamilytree.com
Subject: Re: [LegacyUG] v7 update to 7.0.0.38
Geoff...
When are your "Legacy" -- Legacy users going to see v7? It seems like the
New User Crowd is getting priority over your long time, faithful supportive
users.
Allen
Steve Ayres wrote:
As my wife tells me, if you want to know anything ask a woman>:)
PS: These "Veteran" Legacy users are not "self-appointed royal class"
they are just dedicated users that help people less experienced in using
Legacy like me and you.
{I bow to the royalty as I leave the roo
he room to make she who must be obeyed a
cuppa}> From: [EMAIL PROTECTED]> To: LegacyUserGroup@legacyfamilytree.com>
Subject: Re: [LegacyUG] v7 update to 7.0.0.38> Date: Fri, 23 May 2008 22:59:08
-0400> > I'm not sure I understand why version 7 hasn't been made availab
]>
Sent: Friday, May 23, 2008 8:12 PM
To:
Subject: RE: [LegacyUG] v7 update to 7.0.0.38
Legacy's v7 Mapping requires Internet Explorer 7.0 to be installed. If you
are seeing a blank white screen, this is the reason. There should have
been
a message the first time you ran mapping givin
enson, [EMAIL PROTECTED]
24-05-2008
- Receiving the following content -
From: Erik Pilgaard Vinther
Receiver: LegacyUserGroup
Time: 2008-05-24, 16:47:45
Subject: RE: [LegacyUG] v7 update to 7.0.0.38
As a commercial software company, with a huge base of existing users craving
the new Legacy
: LegacyUserGroup@legacyfamilytree.com
Subject: RE: [LegacyUG] v7 update to 7.0.0.38
As a commercial software company, with a huge base of existing users craving
the new Legacy 7, I don't think it is unreasonable to ask Millennia to tell
us second class customers exactly when we CAN get Legacy 7 (I m
ownload at some point and if
this was a real issue, what will they do then?
Erik
-Oprindelig meddelelse-
Fra: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] På vegne af Thomas
Herson
Sendt: 24. maj 2008 04:59
Til: LegacyUserGroup@legacyfamilytree.com
Emne: Re: [LegacyUG] v7 update to 7.0.0.38
gacyUG] v7 update to 7.0.0.38
Hi Doris,
There isn't yet a Source Conversion Tool so stop looking.
Re the mapping.
It operates in two different places.
There is an icon you can put on the Toolbar which will open up a map
and map locations entered for the current individual. I'm not su
D]>
To: LegacyUserGroup@legacyfamilytree.com
Sent: Friday, May 23, 2008 9:50:14 PM
Subject: RE: [LegacyUG] v7 update to 7.0.0.38
Hi Doris,
There isn't yet a Source Conversion Tool so stop looking.
Re the mapping.
It operates in two different places.
There is an icon you can put on the Toolbar wh
ct: RE: [LegacyUG] v7 update to 7.0.0.38
Hi Doris,
There isn't yet a Source Conversion Tool so stop looking.
Re the mapping.
It operates in two different places.
There is an icon you can put on the Toolbar which will open up a map
and map locations entered for the current individual. I'm not
Behalf Of
> Wynthner
> Sent: Saturday, 24 May 2008 2:02 PM
> To: LegacyUserGroup@legacyfamilytree.com
> Subject: Re: [LegacyUG] v7 update to 7.0.0.38
>
> Am I to understand that the mapping feature will not function with other
> browsers like FF, Opera, etc?
>
>
> --
eplying to this message, please include all previous correspondence.
Thanks.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Thomas
Herson
Sent: Friday, May 23, 2008 7:59 PM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] v7 update to 7.0
Am I to understand that the mapping feature will not function with other
browsers like FF, Opera, etc?
- Original Message
From: Cathy <[EMAIL PROTECTED]>
To: LegacyUserGroup@legacyfamilytree.com
Sent: Friday, May 23, 2008 9:50:14 PM
Subject: RE: [LegacyUG] v7 update to 7.0.0.
Hi Thomas,
I'm a beta tester.
But I'm not a Manual reader. I believe we did have access to a PDF
draft version sometime. The Manual is really a subset of the Help
files but has nice pictures with it.
I've been using Legacy long enough to rarely refer to the Help files
unless I'm wanting to po
Hi Thomas,
"I'm not sure I understand why version 7 hasn't been made available to
"veteran" Legacy users. Just who are these "veteran" Legacy users and
why did I get my free copy of version 7 last week and this
self-appointed royal class didn't? Another thing that puzzles me is who
are these
, please include all previous correspondence.
Thanks.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Markie
Flint Blackmon
Sent: Friday, May 23, 2008 6:11 PM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] v7 update to 7.0.0.38
Unfortunately
es me is who are these people, such as Cathy, who
seem to attempt to answer every question but who has told me that she's
never even seen the manual for version 7.
- Original Message -
From: "Markie Flint Blackmon" <[EMAIL PROTECTED]>
To:
Sent: Friday, May 23, 20
Hi Doris,
There isn't yet a Source Conversion Tool so stop looking.
Re the mapping.
It operates in two different places.
There is an icon you can put on the Toolbar which will open up a map
and map locations entered for the current individual. I'm not sure
whether it is there by default or n
ECTED]
www.LegacyFamilyTree.com
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Doris
Miller-Beck
Sent: Friday, May 23, 2008 4:31 PM
To: LegacyUserGroup@legacyfamilytree.com
Subject: RE: [LegacyUG] v7 update to 7.0.0.38
Jess,
I too had the same problem ~ I c
Right clicking on the toolbar will bring up the tool bar customizer in
7.0.0.38. You can then drag and drop buttons onto the toolbar. The
mapping button is one of the options. Using the View>Map My Family
option on the menu bar will also get you there.
Doris Miller-Beck wrote:
Jess,
I too had
Hi Jess,
If you have unlocked the Deluxe version, you should be able to update
from the Home Tab.
As you've discovered, Legacy 7 isn't yet available on the website for download.
RE the Mapping tool.
It requires Internet Explorer 7 to work.
It also requires the Deluxe version to be unlocked.
An
Unfortunately, most veteran Legacy users who would be in a position to
assist with the new version are unable to help, since V7 hasn't been
made available to us yet.
Margaret
Version 6.0.0.190
Doris Miller-Beck wrote:
Jess,
I too had the same problem ~ I closed everything down and reopened Le
Jess,
As Version 7 is still not available for dowload I suspect that the updates are
not yet available.
How are you accessing the Map My Family via View>Map my Family or by using the
Icon on the Tool Bar? (If you haven't got the Icon then maybe it's not
installed?) Both should be OK, whether
Jess,
I too had the same problem ~ I closed everything down and reopened Legacy,
found where I needed to enter my customer number and than went to Legacy
Home Tab and updated from there. It doesn't look much different to me than
V6, but I am a fairly new user of Legacy and so don't know about all t
Click on "help" then click on "unlock".
Don't know about the map my family too.
~Lisa
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jessica
Morgan
Sent: Friday, May 23, 2008 5:05 PM
To: LegacyUserGroup
Subject: [LegacyUG] v7 update to 7.0.0.38
I too
Jess,
you have to enter your deluxe customer number to be able to download from
the Legacy home tab.
The map is sometimes blank, and seems to reappear after you come back to it.
It doesn't seem to have anything to do with your connection.
Susan Daily
On Fri, May 23, 2008 at 4:04 PM, Jessica Morg
As long time users of Legacy, we will do all they can to help when Legacy 7
is actually available to us. Meanwhile, enjoy Legacy 7.0.0.0.0 while we
continue using the latest available to us - Legacy 6.0.0.190 ...
C.G. Ouimet
Kingston, ON
-Original Message-
From: [EMAIL PROTECTED]
[mail
49 matches
Mail list logo
