Yes thank you that works. perhaps could be put in snippet respository?
On 2023-11-28 02:09, Jean Abou Samra wrote:
I don't think it's in a snippet, but you can do
\version "2.24.2"
\paper {
system-separator-markup = \markup \fill-line { \slashSeparator
\slashSeparator }
}
{ c' \break
Long ago I was an active user but it's gotten so far away that I use an
older version 2.22.1 longer ago my conductor (at the time) wanted
slash separators on both sides of the system that was for 1.16.x I
think.
But is this possible again? If so please either direct me to the
a step too far.
Best wishes,
J
On 23.06.2023 00.58, jh wrote:
Hello- I can't seem to find the forum page to ask this, in fact so
much has changed that perhaps I will not understand the answer.
for Contrabass I have used \clef "bass_8"
I need to go down another octave so I
Hello- I can't seem to find the forum page to ask this, in fact so much
has changed that perhaps I will not understand the answer.
for Contrabass I have used \clef "bass_8"
I need to go down another octave so I input \clef "bass_16" but the
notation output prints a note one step higher than
1. Re: Re-using "\with" contexts (Alasdair McAndrew)
2. Code pointer from end-BarLine to previous NoteHead.?
(Thomas Morley)
3. Re: Code pointer from end-BarLine to previous NoteHead.?
(Jean Abou Samra)
4. Ac
ancient
understanding of the ornament is still current.
J
On 2022-07-15 17:38, Knute Snortum wrote:
On Fri, Jul 15, 2022 at 3:34 PM jh wrote:
using 2.22.2 in fresco, my very old understanding of grace and
acciaccatura is that they receive no duration value in a measure.
That's correct
using 2.22.2 in fresco, my very old understanding of grace and
acciaccatura is that they receive no duration value in a measure. the
following Minimal example using forget for accidentals when compiled
allows only 3 quarter notes in a 4/4 bar. I changed the 8ths in the
acciaccatura to 16ths
Hello all- a while back I asked how to move the sustainoff to after the
last note and someone answered and I believed I saved it and now cannot
find where I put that answer.
Please send it again..
AND- I think there's a way to search for something like this but I so
seldom ever need to do
From one project to the next sometimes 'Frenching' a score works and
sometimes it doesn't
This is the shortest example I could figure out how to make
the second system should be just two staves (and using the same context
etc 5 days ago worked as expected on a different score so this was copy
I finally saw that I'd deleted brackets on the center staff triplet.
The log didn't say anything even fresco didn't help so sorry if you
answered already
--
Thank you Sound & Silence
Beginning May 1, 2021 a new address; 1814 Lake Washington Blvd. So.,
Seattle, Wa. 98144
_206-328-7694 or
I hope I'm sending this properly. This is as small as I could get and
there are at least three things I must be doing wrongCenter staff
the 3 is in a weird place but after the triplets notes aren't lining up.
If this is a dumb mistake on my part please point it out, if it's a
matter of
yep that helped a lot. Thanks.
j
On 2021-12-29 15:34, Carl Sorensen wrote:
On 12/29/21, 3:25 PM, "jh" wrote:
very curious. So your example printed better than mine the
footnote is
very close to the edge and the top is very far down.
So I opened librewriter cut t
rgins in
lilypond?"
J
btw I do appreciate the help, and attention to my issue.
j
On 2021-12-29 12:12, Carl Sorensen wrote:
On 12/29/21, 12:09 PM, "jh" wrote:
thanks- not sure what to do next the printer settings are as
expected.
will have to think some more abo
thanks- not sure what to do next the printer settings are as expected.
will have to think some more about it I guess.
j
On 2021-12-29 12:02, Carl Sorensen wrote:
I added a score to your file to make it pring something.
It generates a perfect PDF on my system. No extra space at the top or
, I'd like to think there's a printer setting but since it
prints normally for everything except lily/fresco-pdfs that doesn't make
sense to me. If you can explain it then I'll look further.
thanks
J
On 2021-12-29 11:34, Carl Sorensen wrote:
On 12/29/21, 9:22 AM, "lilypond-user on behalf
hello using 2.22 and current version of Frescobaldi. using 'letter' and
a new printer Canon
lately the top margin above the header has gotten wider and the footnote
(2 lines smaller font) on the first page of scores is getting cut off or
the bottom line is cut in half.
Is the easy solution
thanks to all for the quick responses and solution. I tend to find
where to put ties and slurs confusing (more confusing than my first
mistyping) so thank you to the addressed and to Brian
On 2021-12-24 13:40, Lukas-Fabian Moser wrote:
Hi,
Am 24.12.21 um 21:24 schrieb jh:
\time 5
yes that did it thank you.
On 2021-12-24 13:38, Brian Barker wrote:
At 13:24 24/12/2021 -0700, you wrote:
\time 5/8
\tempo 4 = 86
d8 e fis4 e8
d e4 d8 c\time 6/8
(b4) d8 b a4 \bar "|."
The slur parentheses are postfixed to the appropriate elements. Instead
/doc/v2.22/Documentation/learning/ties-and-slurs
If not, could you pleas post a minimal example for us to see what
could be the issue?
Slurs across barlines and time signatures are not normally a problem,
so I suppose there is something strange in the code.
Best!
/Leo
24 dec. 2021 kl. 19:14 skrev j
using 2.22 when I try to have a slur ~ across a barline and a time
signature change using fresco nothing happens.
please direct me to a place in the manual that explains how to have this
work.
thanks
j
--
Thank you Sound & Silence
Beginning May 1, 2021 a new address; 1814 Lake Washington
Hello-
I use Synthfont- choose a default font and then after typesetting (if
that's the word) my music click the .ly file for the latest update to
the music and it does compile the midi and on I go. All of this is more
complicated than it used to be in 2.18 but still works and is very very
Knute, thank you it's a short piece so this is doable would the bracket
be a better option for this problem when it's a larger/longer piece?
wondering.
Jay
On 2021-09-19 13:31, Knute Snortum wrote:
On Sun, Sep 19, 2021 at 10:46 AM jh wrote:
2nd time to ask;
SustainOff after a chord comes
2nd time to ask;
SustainOff after a chord comes before the chord, as it shows in the
manual
I'm used to and would like it to be after the chord.
Is there a way to do that?
jay
--
Thank you Sound & Silence
Beginning May 1, 2021 a new address; 1814 Lake Washington Blvd. So.,
Seattle, Wa.
1. Midi Instrument: change? (JxStarks)
2. Re: Midi Instrument: change? (Guy Stalnaker)
GuyS
I too wanted to know how to do this. Since I have limited experience
with the latest versions of lilypond due to total confusion of the new
syntax's. I did find this example you linked to and
Thank you David etal, I've often been unable to find a tool to
open/access tarballs? But I used a linux laptop and got in.
I did find the quantity of material to be overwhelming and it took me a
couple of days to find a way to just find the pdfs in that file but find
them I did.
Thank you for
ehalf of jh"
wrote:
I can easily find the manual html page but the machine I use lily
on is
not online and so I depend on the PDf or have depended on it for
2.18
but there seems to be no link for the pdf on the manuals page?
thank you
As mentioned in the text on the bottom of t
I can easily find the manual html page but the machine I use lily on is
not online and so I depend on the PDf or have depended on it for 2.18
but there seems to be no link for the pdf on the manuals page?
thank you
--
Thank you Sound & Silence
Beginning May 1, 2021 a new address; 1814 Lake
!
Le 01/08/2021 à 18:10, jh a écrit :
A while back David K kept on trying to get me to update beyond 2.18.2
even though I said I'd failed a number of times and that many of the
changes between these versions seem opaque to me.
Well, what changes between 2.18 and 2.22 seem
opaque to you
A while back David K kept on trying to get me to update beyond 2.18.2
even though I said I'd failed a number of times and that many of the
changes between these versions seem opaque to me.
My main text editor has developed a major crash where it freezes
everything and the creator is unable to
Thank you both, I didn't mention that it was a win10 machine now but
mingw did the trick.
On 2021-02-01 17:00, Thomas Morley wrote:
Am Di., 2. Feb. 2021 um 00:53 Uhr schrieb jh :
Hello-
I'm afraid I'm going to get keelhauled for this. But is there a
link/site where I can download 2.18.2
Hello-
I'm afraid I'm going to get keelhauled for this. But is there a
link/site where I can download 2.18.2 for win10.
I've never understood after getting really comfortable with this version
all the changes that make it to me incomprehensible and with a new
computer (today) need to get lily
Hello-
I'm still using 2.18.2
And my PDF 'reader' is Sumatra. Until I did an upgrade of Sumatra when
my cursor was hovering over a note there was information about where in
the .ly file this note was.
After the upgrade this no longer happens. What could be the disconnect
between the two?
I
Thanks you, I thought I remembered that this had come up before but
didn't remember a solution. THis is easy enough to execute. Thank you
for the timely response.
Jay
On 2020-11-02 09:32, Lukas-Fabian Moser wrote:
Hi,
Am 02.11.20 um 17:18 schrieb jh:
here's my small example of the problem
here's my small example of the problem I think it's been addressed
before but have no idea how to find the solution. Please give me a link
or clue to find how to defeat this. Jay
\version "2.18.2"
\header {
title = "31 Oct Hallows"
composer = "Jay Hamilton"
copyright = \markup { \tiny
wrote:
On Sat 03 Oct 2020 at 07:06:55 (-0600), jh wrote:
On 2020-10-02 21:20, David Wright wrote:
> On Fri 02 Oct 2020 at 16:51:07 (-0600), jh wrote:
>
> > In general Lilypond has gotten so technical that I can't even follow
> > the questions.however I use it (older version
that this is the answer to the suggestion/question you raise.
Perhaps it is not possible to access those links from the email?
Jay
On 2020-10-02 21:20, David Wright wrote:
On Fri 02 Oct 2020 at 16:51:07 (-0600), jh wrote:
In general Lilypond has gotten so technical that I can't even follow
Hello-
In general Lilypond has gotten so technical that I can't even follow the
questions.however I use it (older version) and am generally pleased
with what I can understand.
However
Often there are attachments that are 'scrubbed' and links at the bottom
of questions and responses, and
I tried to modify the Lead Sheet example by using a variable:---\version "2.19.40"\music = \relative c'' { a4 e c8 e r4 b2 c4( d) }\score {<< \chords { c2 g:sus4 f e } \music \addlyrics { One day this shall be free __ } \layout { }}=and I got the following
38 matches
Mail list logo
