Re: Repeat with alternatives

On Thu, 01 Oct 2015 19:41:21 +0100 Anthonys Lists wrote: > Anyways, I think we've all missed the OPs problem. As he phrased it, I > understand he wants > > {fixed part 1} {alternative 1} {alternative 2} {fixed part 2} repeat I'm not familiar with a clean notation for

Re: Repeat with alternatives

"Mark Stephen Mrotek" writes: > David, > > Thank you for the information. > My answer was determined by the version used. As was mine. Of course I want to sell people on new developments. -- David Kastrup ___ lilypond-user

Re: Best Practices for file structures, score and parts

Andrew: > So, I'm in the process of transcribing some masses from part-books, and I'm > trying to figure out the best way to set up the file/variable/include > structure so that I have a minimum of clutter. > > There are six masses, with two brass (alternating between trumpet, horn, > and tacet),

Re: Best Practices for file structures, score and parts

Hi Malte, well, if I go by your setup, I could theoretically move the six \score blocks into my master file, so long as I rename the instruments for each movement (and then eventually for each mass as well, if I wanted to combine all six masses into one document), and then make a parts.ly file to

Re: Percent repeats within \parallelMusic

David Sumbler writes: > The string quartet I have been working on has a few passages where one > or more of the instruments are playing the same pattern for several bars > in succession. > > In the score I want these to be written out in full, but in the parts I > would like

Re: Percent repeats within \parallelMusic

Thanks for this information - it could well provide a solution. I was not aware that, in \parallelMusic, the music between successive bar checks could be more than a single bar. Section 1.5.2 of the Notation Reference says "Bar checks | must be used, and the measures must be of the same length."

Re: Repeat with alternatives

David Wright writes: > Following David K's contribution, I looked at issue 355 but, without > any version 2.19 to run, That sounds like something one could fix. > I couldn't experiment with the code in comment #11 (which looks like > the final word). It seems to

Syntax for multiple slurs per Voice?

Hi, issue 4625 in the tracker is the final straw to provide an actual input syntax for setting the spanner-id property introduced before version 2.16. I think currently only slurs and phrasing slurs heed them. While the principal

Best Practices for file structures, score and parts

Hi List, So, I'm in the process of transcribing some masses from part-books, and I'm trying to figure out the best way to set up the file/variable/include structure so that I have a minimum of clutter. There are six masses, with two brass (alternating between trumpet, horn, and tacet), tympani,

Re: Best Practices for file structures, score and parts

Am 02.10.2015 um 09:58 schrieb N. Andrew Walsh: do I enter the transposing instruments into the score in concert pitch or transposed? Can Frescobaldi (my editor of choice) take an entire Voice and transpose it into concert pitch after I've edited, or should I enter the content in concert pitch

Re: Best Practices for file structures, score and parts

Am 02.10.2015 um 09:58 schrieb N. Andrew Walsh: Is there a better way to structure the files? How do I extract the instrument variables into separate part files? Can I just \include all the separate movement files, and then add the Voice variables in sequence? In other words: each movement is

Re: Syntax for multiple slurs per Voice?

Hi David, > Personally I'd rather keep @ for user extensions. Fair enough. > At any rate, a nice idea might be to have a context property slur-ids > (and phrasing-slur-ids and beam-ids) that can be set to a list and will > then cause the Slur_engraver to only look at slurs in that set of ids. >

multiple TextSpanners per voice

Hi all, I'm experimenting with a way to support multiple text spanners in a single voice, using the 'spanner-id property which already enables multiple slurs and phrasing slurs. The attached code works--until the spanners cross a line break. Then the order of the spanners is reversed. I've

Re: multiple TextSpanners per voice

On Fri, Oct 2, 2015 at 10:00 AM, David Nalesnik wrote: > Hi all, > > I'm experimenting with a way to support multiple text spanners in a single > voice, using the 'spanner-id property which already enables multiple slurs > and phrasing slurs. > > The attached code

Re: Syntax for multiple slurs per Voice?

Hi David, > issue 4625 in the tracker > is the final > straw to provide an actual input syntax for setting the spanner-id > property introduced before version 2.16. Fabulous! > How do people feel about choosing one of the following

Re: Syntax for multiple slurs per Voice?

Kieren MacMillan writes: > Hi David, > >> issue 4625 in the tracker >> is the final >> straw to provide an actual input syntax for setting the spanner-id >> property introduced before version 2.16. > >

Question re title formatting

Good morning all, I hate bothering the you all with a dumb question, but I've been wracking my brain with this for two hours. I am arranging a standard Latin setting for our Choir to use Sunday, and seem to be having trouble with something that worked before. I'm still working in 2.18.2 My title

Re: Syntax for multiple slurs per Voice?

>>> How do people feel about choosing one of the following variations of >>> \- and \= (code compiles and does the expected thing even in 2.18): >> >> I think I prefer \=, but I would be happy with either. +1 for `\=', since `@' looks a bit clumsy. Werner

Tie doesn't show

Hi all, I'm fairly new to Lilypond and I'm copying a couple of existing scores to get a hang of the language. I've been able to solve most problems thanks to the excellent documentation, but for this particular problem I could really use some help: What I basically want to do is tie a fes in one

Re: Tie doesn't show

Am 02.10.2015 um 19:34 schrieb S: 4 | %10 <<{e e as as}\\{f,2 f}>> | %11 Ties can only start and end in the same voice. The << \\ >> construct begins two new voices so you can’t have a tie from outside of this construct to inside. But you can do the following: <<

Re: Syntax for multiple slurs per Voice?

Am 02.10.2015 um 16:06 schrieb Kieren MacMillan: > Hi David, > >> issue 4625 in the tracker >> is the final >> straw to provide an actual input syntax for setting the spanner-id >> property introduced before version 2.16. > Fabulous! >

Re: multiple TextSpanners per voice

David Nalesnik writes: > Hi all, > > I'm experimenting with a way to support multiple text spanners in a single > voice, using the 'spanner-id property which already enables multiple slurs > and phrasing slurs. > > The attached code works--until the spanners cross a

Re: multiple TextSpanners per voice

> > The second example shows that tweaks can mess up this reversed ordering > > even further. > > > > Does anyone know what is happening here? I really have no idea :( > > Here's an image. > > (I'm running 2.19.27 with Windows 10, 64-bit, if that's has anything to do > with it.) Just for the

Re: multiple TextSpanners per voice

David, On Fri, Oct 2, 2015 at 11:26 AM, David Kastrup wrote: > David Nalesnik writes: > > > Hi all, > > > > I'm experimenting with a way to support multiple text spanners in a > single > > voice, using the 'spanner-id property which already enables

Re: Question re title formatting

Hello Karen, Works with 2.19.28. JM > Le 2 oct. 2015 à 18:29, Karen Billings a écrit : > > Good morning all, > > I hate bothering the you all with a dumb question, but I've been wracking my > brain with this for two hours. > > I am arranging a standard Latin setting for

Re: Repeat with alternatives

Quoting Johan Vromans (jvrom...@squirrel.nl): > On Thu, 01 Oct 2015 19:41:21 +0100 > Anthonys Lists wrote: > > > Anyways, I think we've all missed the OPs problem. As he phrased it, I > > understand he wants > > > > {fixed part 1} {alternative 1} {alternative 2}

Re: multiple TextSpanners per voice

Michael, On Fri, Oct 2, 2015 at 11:33 AM, Michael Gerdau wrote: > > > The second example shows that tweaks can mess up this reversed ordering > > > even further. > > > > > > Does anyone know what is happening here? I really have no idea :( > > > > Here's an image. > > > > (I'm

Re: Repeat with alternatives

On 02/10/2015 07:24, Johan Vromans wrote: On Thu, 01 Oct 2015 19:41:21 +0100 Anthonys Lists wrote: Anyways, I think we've all missed the OPs problem. As he phrased it, I understand he wants {fixed part 1} {alternative 1} {alternative 2} {fixed part 2} repeat I'm

Re: Best Practices for file structures, score and parts

On 02/10/2015 08:58, N. Andrew Walsh wrote: do I enter the transposing instruments into the score in concert pitch or transposed? Can Frescobaldi (my editor of choice) take an entire Voice and transpose it into concert pitch after I've edited, or should I enter the content in concert pitch

Re: Tie doesn't show

2015-10-02 20:10 GMT+02:00 Malte Meyn : > > > Am 02.10.2015 um 19:34 schrieb S: >> >> 4 | %10 >> <<{e e as as}\\{f,2 f}>> | %11 >> > Ties can only start and end in the same voice. The << \\ >> construct begins > two new voices so you can’t have a tie from

Re: Slur under beam

On 02.10.2015 07:27, Andrew Bernard wrote: Simon Albrecht has made a fine fix That’s very kind to say, but I only did some updating; there remain bugs as I already posted on this list (search for "Debugging shapeII"). Yours, Simon ___

Re: Repeat with alternatives

On Fri, 2015-10-02 at 13:27 -0500, David Wright wrote: > Quoting Johan Vromans (jvrom...@squirrel.nl): > > On Thu, 01 Oct 2015 19:41:21 +0100 > > Anthonys Lists wrote: > > > > > Anyways, I think we've all missed the OPs problem. As he phrased it, I > > > understand he

Re: Best Practices for file structures, score and parts

On 02.10.2015 12:03, Malte Meyn wrote: I remember an issue with note names in german (and perhaps other languages) when you have several names (asas and ases) for the same pitch (a flat). I’m not sure whether this has been fixed. You might check at the issue tracker:

Re: Syntax for multiple slurs per Voice?

2015-10-02 13:13 GMT+02:00 David Kastrup : > > Hi, issue 4625 in the tracker > is the final > straw to provide an actual input syntax for setting the spanner-id > property introduced before version 2.16. I think currently

Re: Syntax for multiple slurs per Voice?

Thomas Morley writes: > (4) > Observation: > Using Slurs with and without setted 'spanner-id works as well > \relative { c'\=1( d( e\=1) f) } > > \relative { c'\=1(^( e\=1)) } The default is a spanner-id of "" so that's not much of a surprise. -- David Kastrup

Re: Whiteout on hairpins?

On 01.10.2015 20:07, Connor Harris wrote: Is there any way to print hairpins while whiting out parts of anything (specifically, in this case, note stems and beams) that they cross, analogous to what the \whiteout command does for text markup? I’d suggest to either use a \tweak command: {

Re: multiple TextSpanners per voice

On Fri, Oct 2, 2015 at 12:09 PM, David Nalesnik wrote: > David, > > On Fri, Oct 2, 2015 at 11:26 AM, David Kastrup wrote: > >> David Nalesnik writes: >> >> > Hi all, >> > >> > I'm experimenting with a way to support multiple

Re: multiple TextSpanners per voice

On Fri, Oct 2, 2015 at 5:49 PM, David Nalesnik wrote: > > Horizontal_bracket_engraver achieves correct ordering of nested brackets > through the side-position-interface array 'side-position-elements. > Brackets closer to the staff are added to the support of brackets

Re: Repeat with alternatives

At 19:30 02/10/2015 +0100, Anthony Youngman wrote: At the end of the day, it's down to the conductor to make sure the players know what they're doing. But surely engraved music is designed to indicate this unambiguously? If the conductor needs to get involved, the representation has failed.

Re: Repeat with alternatives

Quoting Richard Shann (rich...@rshann.plus.com): > On Fri, 2015-10-02 at 13:27 -0500, David Wright wrote: > > Quoting Johan Vromans (jvrom...@squirrel.nl): > > > On Thu, 01 Oct 2015 19:41:21 +0100 > > > Anthonys Lists wrote: > > > > > > > Anyways, I think we've all

download 2.19.28

I try to download to-day and I got the following message. Also it seem there there is no activity on user mailinglist.Immanuel,Ming ___ lilypond-user mailing list lilypond-user@gnu.org https://lists.gnu.org/mailman/listinfo/lilypond-user