2011/5/2 Michael Hope michael.h...@linaro.org:
On Mon, May 2, 2011 at 11:13 AM, Jan Seiffert
kaffeemons...@googlemail.com wrote:
2011/5/2 Michael Hope michael.h...@linaro.org:
Hi Michael, Linaro Devs
I see similar numbers.
Great to hear ;)
Means i'm not totally on the wrong track
Note
2011/5/2 Michael Hope michael.h...@linaro.org:
[snip]
-- Forwarded message --
From: Michael Hope michael.h...@linaro.org
Date: Mon, May 2, 2011 at 10:35 AM
Subject: Re: [Zlib-devel] [3/8][RFC V3 Patch] Add special ARM Adler32 version
To: zlib-de...@madler.net
On Mon, May 2,
On 30 April 2011 20:47, Jeremy Chang jeremy.ch...@linaro.org wrote:
Hi,
What you think about this patch for kernel version 2.6.38.3?
It's meant to be applied for beaglexM and pandaboard.
We need this for vold to mount sdcard partition.
It looks good to me. Unless someone complains
I'm drafting the blueprint [1], and need your favors to collect LTP
(Linux Test Project [2]) result on boards that Linaro supports with
Natty kernel running on.
The example steps of the testing (I did on i.mx51 babbage with Beta-2
linaro-n-developer) are documented on Whiteboard of [1]. Please
W dniu 02.05.2011 10:59, Shawn Guo pisze:
I'm drafting the blueprint [1], and need your favors to collect LTP
(Linux Test Project [2]) result on boards that Linaro supports with
Natty kernel running on.
Have you seen abrek, launch-control and lava?
You can run LTP via abrek on any board,
Hi,
notes and actions from our Wednesday graphics working group call are
available on the wiki:
+ https://wiki.linaro.org/WorkingGroups/Middleware/Graphics/Notes/2011-04-27
Details about when and where of this meeting can be found here:
+
http://validation.linaro.org/launch-control/dashboard/test-runs/fccb906e-7301-11e0-816b-2e4070f01206/has
the results from a recent run I did on panda in the validation lab. I
do restrict the default set of tests in ltp to skip a few of the nastier IO
ones that run ok on fast machines with sata
Nicolas, Andy,
I see that Andy's stuff went into linux-linaro-2.6.38 earlier. What
new CONFIG_'s do I need to turn on in the packaged kernel to ensure we
get all the fabulous new stuff enabled?
Thanks,
John
___
linaro-dev mailing list
Ok, thanks.
On Mon, May 2, 2011 at 8:44 AM, Nicolas Pitre nicolas.pi...@linaro.org wrote:
On Mon, 2 May 2011, John Rigby wrote:
Nicolas, Andy,
I see that Andy's stuff went into linux-linaro-2.6.38 earlier. What
new CONFIG_'s do I need to turn on in the packaged kernel to ensure we
get all
Perhaps, I know there's been some discussion about Google's concerns
about it. Alexander listed the topic, but is traveling at the moment.
I created the session from:
https://wiki.linaro.org/Cycles//TechnicalTopics/Platforms
P3.9
Android Hardfloat experiment
Medium/High
Setup an experimental
Hi Nicolas,
make omap2plus_defconfig
then
edit .config and remove CONFIG_ARCH_OMAP2=y line
then
make oldconfig and turn on CONFIG_THUMB2_KERNEL
then make uImage
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
OBJCOPY arch/arm/boot/Image
Kernel: arch/arm/boot/Image is ready
On Mon, 2 May 2011, John Rigby wrote:
Hi Nicolas,
make omap2plus_defconfig
then
edit .config and remove CONFIG_ARCH_OMAP2=y line
then
make oldconfig and turn on CONFIG_THUMB2_KERNEL
then make uImage
LD vmlinux
SYSMAP System.map
SYSMAP .tmp_System.map
OBJCOPY
Deepak,
welcome and good luck. See you in Budapest
Dave
On 05/02/11 19:25, Deepak Saxena wrote:
Hello all,
I want to introduce myself to the linaro-kernel and linaro-dev lists
as I just started at Linaro today in the role of Kernel Working Group
Technical Lead and will be working
Great to meet you Deepak.
I'm the new Linaro Android Platfrom lead.
I'm looking forward to meeting you.
On 2 May 2011 13:25, Deepak Saxena dsax...@linaro.org wrote:
Hello all,
I want to introduce myself to the linaro-kernel and linaro-dev lists as I
just started at Linaro today in the role
Every time I boot plymouth is always killed by SEGV
Every few reboots the system will hang without continuing to boot at this
message:
init: udev-fallback-graphics main process (993) terminated with status 1
init: plymouth main process (538) killed by SEGV signal
init: plymouth-splash main
After rebooting several times in succession I can confirm that
- the hang at boot-time no longer occurs
- the hang at reboot still occurs
However, there is another error which has surfaced
Warning... fsck.ext3 for device /dev/mmcblk0p2 exited with signal 11.
mountall: fsck / [721]
On Mon, May 02, 2011 at 11:25:20AM -0700, Deepak Saxena wrote:
Hello all,
I want to introduce myself to the linaro-kernel and linaro-dev lists as I
just started at Linaro today in the role of Kernel Working Group Technical
Lead and will be working closely with all of you on enhancing the ARM
All,
I apologize for the broad distribution.
Alexander and I have been getting the Android track going. We have the
following topics. Most of these have subscribers. Would everyone mind
taking a look through this list and subscribing or suggesting people
who should be involved? I'll be getting
On Mon, May 02, 2011 at 11:00:48AM +0200, Zygmunt Krynicki wrote:
W dniu 02.05.2011 10:59, Shawn Guo pisze:
I'm drafting the blueprint [1], and need your favors to collect LTP
(Linux Test Project [2]) result on boards that Linaro supports with
Natty kernel running on.
Have you seen abrek,
19 matches
Mail list logo
