[linrad] Re: lir01-35

Moin Carsten, > When I set up the soundcard I get two devices > 00: /dev/dsp 1000-192000 Hz 4 Chan. 16 bit RDONLY > 01: /dev/dsp0 1000-192000 Hz 4 Chan. 16 bit RDONLY Ich weiß nicht welche Soundkarte du hast, aber bist du sicher, daß diese Karte duplexfähig ist? Linrad erkennt die Karte als "

[linrad] Can not query hardware under windows

Here is a short report on my experience with Linrad 2.0 Just tried to get Linrad 2.0 running under Win2k. It will not recognize the Delta44 nor the on board AC97 sound. There is an old ESE Solo PCI soundcard still pluged into the mainboard that I used for some experiments when running under Linrad

[linrad] A/D SPEED ERROR

Hi all, I managed to get wlr2-00a on my Win2K System running, using the Delta 44 board as input and on board AC97 as output (tnx Roger and others!). The following problem still needs to be solved: After a few seconds in weak signal mode (haven't tried the other modes yet) I get something like th

[linrad] Re: A/D SPEED ERROR

ll not start at all. Error message is: Error 2010 code 0 Thread no 10 failed to start (See thrdef.h) I use an AMD Duron at 1,3 GHz and 256Mb RAM. System runs OK with the Linux setup. Daniel Von: "Daniel Koch" <[EMAIL PROTECTED]> > An: "Linrad mailinglist"

[linrad] Re: Delta 44

Hi Dom, I think my Delta 44 came with a CD that contained a driver for MAC, so it should be the same hardware. I am in the office now but I can verify later at home if you want. Daniel, DL3IAE > --- Ursprüngliche Nachricht --- > Von: DEHAYS Dominique <[EMAIL PROTECTED]> > An: "Linrad mailinglis

[linrad] par_wcw file missing

Hi Leif, Winrad 02.04 crashes when selecting one of the modes saying: You are prompted to the parameter selection screens for the following reason: "par_wcw file missing" Setup routine runs fine, par_userint is generated and appears in the winrad folder. 73 Daniel -- http://dl0ger-eme.dd8il.d

[linrad] help compiling xlinrad

Hello, can anyone tell me how to compile Linrad for X11? I have downloaded Linrad 2-07 and it installed fine under svgalib 1.19. Now I would like to take advantage of the multi-threaded structure, but I don't know how to compile. I guess it is easy, but I need someone to put me in the right direct

[linrad] Re: help compiling xlinrad

> Betreff: [linrad] Re: help compiling xlinrad > Datum: Mon, 24 Apr 2006 19:17:29 +0200 > > Hi Daniel > On Monday 24 April 2006 18:40, Daniel Koch wrote: > > can anyone tell me how to compile Linrad for X11? > > I have downloaded Linrad 2-07 and it installed fine under svg

[linrad] Re: help compiling xlinrad

el, DL3IAE > --- Ursprüngliche Nachricht --- > Von: Pierre Vanhoucke <[EMAIL PROTECTED]> > An: "Daniel Koch" <[EMAIL PROTECTED]> > Betreff: Re: [linrad] Re: help compiling xlinrad > Datum: Tue, 25 Apr 2006 18:29:08 +0200 > > Hello Daniel, > On Tuesday 25 Apr

[linrad] Linrad: Change frequency scale?

Hi everyone, I use several switchable crystals in my DC receiver. They are all surplus and some of the have rather "odd" frequencies. I would like to be able to change the frequency scale above the main waterfall and so adapt it to the actual frequency. Normaly it is not a problem to do the ca

[linrad] FT736 and Linrad

Hi all, has anyone on this reflector used Linrad for frequeny setting of an FT736R? Serial port would be nice... Sri, not much of a prorammer here. Tnx Daniel, DL3IAE -- http://dl0ger-eme.dd8il.de/Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal für Modem und ISDN: htt

[linrad] Linrad crashes OSS?

Hi Leif and all, I am getting major crashes of OSS when playing back .raw files with xlinrad. 2.19 and 2.17 seem to do the same. After a few minutes of playback there is a short beep and sound disapears. "Soundoff" and re-"soundon" does not help, although OSS sends no failure message at re-start

[linrad] Re: S-meter question

Joe, just click on "s" in the little box that shows the 3 S-meter values and the coherent graph. Daniel, DL3IAE Original-Nachricht Datum: Wed, 08 Nov 2006 13:20:11 -0500 Von: Joe Taylor <[EMAIL PROTECTED]> An: "Linrad mailinglist" Betreff: [linrad] S-meter question > Hi Lei

[linrad] Linrad: Increased CPU usage

Hello Leif, there seems to be significant increase from 02.23 to 02.27 regarding the CPU usage. On my system (AMD Duron 1,3 GHz, 512Mb RAM) I see the following figures: Linux (Suse 9.1): 02.19 (02.23 is the same) FFT2 off: 19% FFT2 on: 37% 02.27 FFT2 off: 36% FFT2 on: 53% [EMAIL PROTECTED] -

[linrad] Re: Increased CPU usage

Hello Leif, I use VESA 1280x1024 @ 60Hz / 24bit with X11. The values I sent before are with a signal selected. Percentages change a little with the selected filter bandwidths (+-3%). Without selecting a signal the figures are: 02.27: no FFT2: 12% with FFT2: 28% 02.19: no FFT2: 9% with FFT2: 2

[linrad] E-MU1212 and Linux/OSS

Hi all, I got hold of an E-MU1212 192kHz/24bit soundcard which I would like to use with my Linrad setup. I have it running under W2K at 192kHz but I have not discovered how to set the sampling rate under Linux (Suse 9.1). OSS soundcard autodetection finds the card as "sound blaster audigy2 value

[linrad] Re: Linrad under Windows

...this is just to put Heinz in the right direction. Hallo Heinz, Linrad unter Windows läuft mittlerweile problemlos. Einfach wlr2-34.zip (288422 bytes) von der Linrad Seite runterladen, entpacken und installieren. Solltest du dazu noch Fragen haben kann ich dir vermutlich helfen. gl Daniel