Thanks everyone... There where a number of suggestion that worked very well. It
turned out to be a
hidden file from a background task that I didn't know the customer had running.
Ferguson, Neale wrote:
du -x -h --max-depth=1 /
It will then show you the space used by 1st level of directories. Then
/dev/system/lvol1: Unattached inode 928477
/dev/system/lvol1: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
(i.e., without -a or -p options)
On Dec 29, 2004, at 8:32 AM, Noll, Ralph wrote:
/dev/system/lvol1: Unattached inode 928477
...
Anyone every seen the above???
Filesystem corruption. Did you log off the guest without cleanly
shutting it down?
Any ideas???
Do what the message says: log in in single user mode and run
fsck
We are setting up a vswitch and our problem is we can't use the same OSA
subnet for the vswitch IP addresses without redesigning our whole OSA and
OSPF network.
My question is 'Can Linux on a vswitch point to a zVM static VIPA as its
gateway instead of a LAN router gateway to reach the network?'
You are in a limited shell. You don't have the full set of commands but
enough to troubleshoot disk errors. Typically running fsck on the root
disk will fix your problems. After you do that, do a CTRL-D. The system
will reboot.
tom
- - - - - - - - - - - -
Toto, I have a feeling we're not in
Hi Arjen,
I didn't see a response to your question about where VM messages are logged.
As a general rule, most sites direct all important system messages to the
system operator (named OPERATOR unless you've changed it in your parms
file). From your question, I'll assume you are not running the
I hope ya'll don't mind. This is really more of a generic UNIX ftp type
question. Suppose that I have a program whose output I want to go to a
remote system. Futher suppose that said remote system only have ftp
capability. I cannot use NFS, Samba, netcat, ... . Well, the remote
system is a Windows
John,
I cannot use NFS, Samba, netcat, ... . Well, the remote
system is a Windows system.
Why can't you use SMB to a Windows system?
This places my report directly on the Windows server.
Yup, SMB does that.
Mike MacIsaac [EMAIL PROTECTED] (845) 433-7061
For us non-VM aware users, can I assume that the command CP LINK causes
the new root disk to be available -- aka online, to the original or
(old/source) system?
-Original Message-
From: Tom Shilson [mailto:[EMAIL PROTECTED]
Sent: Tuesday, December 28, 2004 8:34 AM
To:
As a long-time VMer (the first Rel 3), when I am working on Linux I really
miss having my console spooled, showing all my commands and all my output.
I have tried using tee with the shell, but I haven't been able to make it
work. Is there any way to do this?
Thanks,
tom
- - - - - - - - - - - -
Has anyone mounted a minidisk in 'raw' mode in SLES9?
When I use:
raw/dev/raw/raw1 /dev/dasdh
I get the error:
zlintest1:/home/tssrxn1 # raw /dev/raw/raw1 /dev/dasdh
Cannot open master raw device '/dev/rawctl' (No such device or
address)
Even raw-qa gives the same error.
At present I create a file from my program, ftp the file to
the Windows
box, then rm the output file.
If you can control what FTP client is used on your system, check out
using 'ncftp' and 'ncftpbatch'. ncftpbatch allows you to essentially
schedule the transfer as a background task, and there
On Dec 29, 2004, at 11:53 AM, McKown, John wrote:
I hope ya'll don't mind. This is really more of a generic UNIX ftp type
question. Suppose that I have a program whose output I want to go to a
remote system. Futher suppose that said remote system only have ftp
capability. I cannot use NFS, Samba,
Hi,
Yes, but In my example, I was making the old and new root disks
available to a second system. In a follow-on note to mine, Mark Post gave
an example of doing it all on one system. I suggest that you look at his
method first.
From Mark's Post
Taking the
Is there any way to do this?
script
Type script - do your stuff - type exit and the file typescript is
created.
Mike MacIsaac [EMAIL PROTECTED] (845) 433-7061
--
For LINUX-390 subscribe / signoff / archive access
John:
Looks like you rolled out an FTP client in C. I have done something
similar using Perl (Net::FTP module). It is slick in that you can examine
the FTP log in real-time and determine if the FTP succeeded. One of the
problem I had was to make sure that the file is processed at the other end
Vm doesn't recognize ctrl-d...
-Original Message-
From: Tom Shilson [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 29, 2004 10:32 AM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Error on startup
You are in a limited shell. You don't have the full set of
commands but enough
find /path -xdev -type f -ls | sort -n -r +6 | more -c
John R. Campbell, Speaker to Machines (GNUrd) {813-356|697}-5322
Adsumo ergo raptus sum
MacOS X: Because making Unix user-friendly was easier than debugging
Windows.
Red Hat Certified Engineer
It can be a real bear when someone deletes the file but leaves the
process that has it open running...
See: http://www.systemtoolbox.com/article.php?articles_id=15
John R. Campbell, Speaker to Machines (GNUrd) {813-356|697}-5322
Adsumo ergo raptus sum
MacOS
^D (caret-D) and then enter. I think from that prompt exit will also work.
-Original Message-
Vm doesn't recognize ctrl-d...
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL
Can the box/PC from which you're ssh-ing to zLinux also connect to the
Winx box on which you want to put the file?
If so, and if the zLinux ssh server has port-forwarding enabled, you can
port-forward (tunnel) SMB thru your PC's shh client to connect your
mainframe Linux to your Winx share. You
Linux on 390 Port LINUX-390@VM.MARIST.EDU wrote on 12/29/2004 12:31:39
PM:
Vm doesn't recognize ctrl-d...
Try exit. If that doesn't work, try to umount root (I don't know if you
can at this point) then #CP IPL.
tomS
--
For
inline: graycol.gifinline: pic21577.gifinline: ecblank.gif
On Wed, 29 Dec 2004, McKown, John wrote:
Date: Wed, 29 Dec 2004 11:53:19 -0600
From: McKown, John [EMAIL PROTECTED]
Reply-To: Linux on 390 Port LINUX-390@VM.MARIST.EDU
To: LINUX-390@VM.MARIST.EDU
Subject: ftp question, not really Linux
I hope ya'll don't mind. This is really more of a
We've noticed that under certain conditions, the df command will show a
reiser filesystem still full even after files are deleted to make room. The
stats don't appear correctly until the filesystem is unmounted and remounted.
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL
-Original Message-
From: Linux on 390 Port [mailto:[EMAIL PROTECTED] On
Behalf Of Paul L. Rogers
Sent: Wednesday, December 29, 2004 1:01 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: ftp question, not really Linux
snip
Are you sure that your FTP client doesn't already support
On Dec 29, 2004, at 12:31 PM, Noll, Ralph wrote:
Vm doesn't recognize ctrl-d...
Just use exit to log out of that shell.
--
For LINUX-390 subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED] with the
From:Mark Post [EMAIL PROTECTED]
Subject: Re: Experiences with Oracle 10g Database on Linux for zSeries
I was pretty sure that Oracle 10g was going to be 64-bit only. Does
anyone
have any information to confirm or refute this?
Mark Post
Indeed, Oracle 10g for Linux on zSeries is 64-bit only.
Not exactly. It makes it available to CP for that z/VM guest. To make it
accessible to CMS, you would do an access command (if it were CMS
formatted). To make it available to Linux, you would need to go through the
echo add device range=xxx /proc/dasd/devices routine.
Mark Post
Tom,
It sounds as if you are running your linux systems as VM guests.
If so, just spool the console like any other guest.
I IPL CMS in all my linux guests, run a profile to setup swap
and other things, and spool the console. Then I ipl the linux
boot volume.
Otherwise you can use that neat
I think I know the answer but appreciate any confirmations or other
recommendations. It has been a long process.
I am attempting to implement a basevol/guestvol system similar to what is
described at http://linuxvm.org/present/misc/basevol.html . I have the
root filesystem defined as R/O under
Linux on 390 Port LINUX-390@VM.MARIST.EDU wrote on 12/29/2004 03:13:57
PM:
Tom,
It sounds as if you are running your linux systems as VM guests.
If so, just spool the console like any other guest.
I IPL CMS in all my linux guests, run a profile to setup swap
and other things, and spool the
It looks like your root filesystem was not unmounted cleanly. Perhaps
something went wrong during the shutdown of the guest. You may be able to get
around this by mounting it r/w, then unmount and mount it r/o.
In general I don't like to use journaled filesystems for read only access. It
Plus, there's simply no benefit to using a journaled file system in
read-only mode. The journal is there to record updates that haven't been
written out to the file system yet. A read-only file system won't have any
updates, so no need for the journal. As you point out, it only causes
confusion
SLES9 for S/390 (64-bit) in an LPAR (no VM) using a shared IFL (I have one
other LPAR running SLES9 31-bit)
I have looked and I have not seen any documentation that shows how to add a
dasd unit via command line under SLES9.
Under SLES8 I used to execute
echo add device range=
On Dec 29, 2004, at 3:25 PM, Peter E. Abresch Jr. - at Pepco wrote:
I think I know the answer but appreciate any confirmations or other
recommendations. It has been a long process.
I am attempting to implement a basevol/guestvol system similar to what
is
described at
If the dasd address was genned for the LPAR, then it should be visible in
yast under system (or hardware) -- DASD. You can then activate it,
format and mount.
__
Ranga Nathan / CSG
Systems Programmer - Specialist; Technical Services;
BAX Global Inc.
Is there another way besides using the yast interface?
-Original Message-
From: Ranga Nathan [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 29, 2004 2:24 PM
To: LINUX-390@VM.MARIST.EDU
Subject: Re: Question re: Linux SLES9
If the dasd address was genned for the LPAR, then it should
On Wed, 29 Dec 2004 14:09:54 -0800, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I have looked and I have not seen any documentation that shows how to add a
dasd unit via command line under SLES9.
With devfs you enable and disable devices by writing into pseudo
variables under the /sys
Yepjust like any other dasd
-Original Message-
From: shogunx [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 29, 2004 5:02 PM
To: LINUX-390@VM.MARIST.EDU
Subject: 2105
Hi All,
Has anyone here natively installed linux on an ess 2105?
Thanks,
Scott
We have, had no problems, we use flashcopy for backups. It all works
great.
Peter
shogunx [EMAIL PROTECTED]
Sent by: Linux on 390 Port LINUX-390@VM.MARIST.EDU
12/29/2004 06:02 PM
Please respond to
Linux on 390 Port LINUX-390@VM.MARIST.EDU
To
LINUX-390@VM.MARIST.EDU
cc
Subject
2105
Hi
On Wed, 29 Dec 2004, Noll, Ralph wrote:
Yepjust like any other dasd
No, I mean standalone, without being connected to another host, or a 9672,
running linux instead of AIX. Those cluster hosts are pretty significantly
powerful smp machies by themselves. It would be a shame to waste that
On Wednesday, 12/29/2004 at 11:00 EST, Dave Kutz [EMAIL PROTECTED]
wrote:
We are setting up a vswitch and our problem is we can't use the same OSA
subnet for the vswitch IP addresses without redesigning our whole OSA
and
OSPF network.
My question is 'Can Linux on a vswitch point to a zVM
43 matches
Mail list logo
