Comments inline below:
> This change turns the UFS variant (SCSI_UFS_QCOM) into a UFS
> a platform device.
> In order to do so a few additional changes are required:
> 1. The ufshcd-pltfrm is no longer serves as a platform device.
>Now it only serves as a group of platform APIs such as PM
Looks good to me.
Reviewed-by: Subhash Jadavani
> Some of the data structures (like response UPIU) and/or its elements
> (unused fields) should be cleared before sending out the respective
> command to UFS device.
>
> This change clears the UPIU response data structure
Looks good to me.
Reviewed-by: Subhash Jadavani
> This patch exposes the ioctl interface for UFS driver via SCSI device
> ioctl interface. As of now UFS driver would provide the ioctl for query
> interface to connected UFS device.
>
> Signed-off-by: Dolev Raviv
Looks good to me.
Reviewed-by: Subhash Jadavani
> Signed-off-by: Yaniv Gardi
>
> ---
> drivers/scsi/ufs/ufs-qcom.c | 34 +-
> drivers/scsi/ufs/ufshcd.h | 21 +
> 2 files changed, 38
Looks good to me.
Reviewed-by: Subhash Jadavani
> New revisions of UFS host controller supports the new UniPro
> hardware controller (referred as QUniPro). This patch adds
> the support to enable this new UniPro controller hardware.
>
> This change also adds power
On Thursday 22 October 2015 07:02:14 subha...@codeaurora.org wrote:
> >
> > Required properties:
> > -- compatible: compatible list, contains "jedec,ufs-1.1"
> > +- compatible: compatible list, contains "jedec,ufs-1.1" or
> > + "qcom,msm8994-ufshc" or
Looks good to me.
Reviewed-by: Subhash Jadavani
> In order to simplify the code a set of wrapper functions is created
> to test and call each of the variant operations.
>
> Signed-off-by: Yaniv Gardi
>
> ---
> drivers/scsi/ufs/ufs-qcom.c | 1 -
Looks good to me.
Reviewed-by: Subhash Jadavani
> This change is required in order to be able to build the component
> as a module.
>
> Signed-off-by: Yaniv Gardi
>
> ---
> drivers/scsi/ufs/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1
Looks good to me.
Reviewed-by: Subhash Jadavani
> Export the following functions in order to avoid build errors
> when the component PHY_QCOM_UFS is compiled as a module:
>
> ERROR: "ufs_qcom_phy_disable_ref_clk"
> [drivers/scsi/ufs/ufs-qcom.ko] undefined!
> ERROR:
Looks good to me.
Reviewed-by: Subhash Jadavani
> This change fixes a compilation warning that happens if SCSI_UFS_QCOM
> is compiled as a module.
> Also this patch fixes an error happens when insmod the module:
> "ufs_qcom: module license 'unspecified' taints kernel."
Looks good to me.
Reviewed-by: Subhash Jadavani
> When sending a query to the device returns with a timeout error,
> we clear the corresponding bit in the DOORBELL register but
> we don't clear the outstanding_request field as we should.
> This patch fixes this bug.
>
Looks good to me.
Reviewed-by: Subhash Jadavani
> A race condition appear to exist between request completion when
> scsi_done() is called to end the request and set the tag back to
> -1 (at blk_queue_end_tag() scsi_end_request), and scsi layer error
> handling which
On Mon, Oct 19, 2015 at 01:05:33PM -0700, Stephen Boyd wrote:
> Now that __cpuinit has been removed, the __ref markings on these
> functions are useless. Remove them. This also reduces the size of
> the multi_v7_defconfig image:
>
> $ size before after
>textdata bss dec hex
On Wed, Oct 14, 2015 at 05:13:44PM -0500, Andy Gross wrote:
> The following changes since commit 6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f:
>
> Linux 4.3-rc1 (2015-09-12 16:35:56 -0700)
>
> are available in the git repository at:
>
> git://codeaurora.org/quic/kernel/agross-msm.git
This series starts by adding hwspinlock, smem, gsbi5 and cleans up the
8064 regulator definitions.
Based on this it adds the necessary nodes for booting the Sony Xperia Z
(APQ8064 based) to userspace, with UART, eMMC, uSD, USB gadget and hw
buttons.
Bjorn Andersson (4):
ARM: dts: qcom:
Signed-off-by: Bjorn Andersson
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 22 ++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi
b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 1bc6c4039dea..fa3053c14532 100644
Signed-off-by: Bjorn Andersson
---
arch/arm/boot/dts/qcom-apq8064.dtsi | 29 +
1 file changed, 29 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi
b/arch/arm/boot/dts/qcom-apq8064.dtsi
index a4c1762b53ea..1b64723bd8a0
This introduces initial support for the Sony Xperia Z smartphone, including
support for UART, MMC, USB gadget and physical buttons.
Signed-off-by: Bjorn Andersson
---
arch/arm/boot/dts/Makefile | 1 +
Consolidate all labeling of regulators into the core 8064 dtsi file to
make them available from all other dts files.
Signed-off-by: Bjorn Andersson
---
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 16 +-
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 20
On Tue, Jul 28, 2015 at 6:37 PM, Bjorn Andersson
wrote:
> From: Werner Johansson
>
> This adds support for the Sharp panel found on the Qualcomm
> Snapdragon 800 Dragonboard (APQ8074)
>
> Signed-off-by: Werner Johansson
Hi Dave,
A bit smaller pull this time. Few minor things, plus initial support
for msm8996 (snapdragon 820).. Sorry, a bit latish, was hoping to get
some 8960/8064 DSI stuff included. But still waiting on the v2 of the
patchset (just pending some minor review comments). It would be nice
to get
Hi Bjorn,
On 2015/9/22 1:52, Bjorn Andersson wrote:
The WCNSS_CTRL SMD client is used for among other things upload nv
firmware to a newly booted WCNSS chip.
Signed-off-by: Bjorn Andersson
---
This driver probes on the WCNSS_CTRL SMD channel as it comes up upon
2015-09-02 19:13 GMT+09:00 Yaniv Gardi :
> Performing several writes to UFS host controller registers has
> no gurrantee of ordering, so we must make sure register writes
> to setup request list base address etc. are performed before the
> run/stop register is enabled.
> In
[[PATCH] serial: msm_serial: Make config tristate] On 21/10/2015 (Wed 16:05)
Stephen Boyd wrote:
> This driver works as a module, so mark it as a tristate config
> instead of a bool.
>
> Cc: Paul Gortmaker
> Signed-off-by: Stephen Boyd
> ---
On Thu 22 Oct 03:25 PDT 2015, yfw wrote:
> Hi Bjorn,
>
> On 2015/9/22 1:52, Bjorn Andersson wrote:
[..]
>
> I have a question: Do you have plan to add the nob to trigger wcnss firmware
> downloading which is also common for wifi and BT?
>
In caf the wcnss driver is actually two drivers
2015-10-21 23:57 GMT+09:00 Akinobu Mita :
> 2015-09-02 19:13 GMT+09:00 Yaniv Gardi :
>> DME commands such as Hibern8 enter/exit and gear switch generate 2
>> completion interrupts, one for confirmation that command is received
>> by local UniPro and
26 matches
Mail list logo