It always registers, no matter whether there is an ir receiver or not.
oh, ok!
...and I've added the little jumper on the CI - but it won't work.
I do a 'tail -f /dev/input/event3' and get nothing when pointing the
remote
at it.
This will only work if you have loaded a keymap.
This
Q2) when i run cat /dev/dvb/adapter0/dvr0 ~/dvbs.ts and the card
is tuned to DVB-S channel with MPEG-2 video then i got playable (with
mplayer) TS file, but when i do the same for DVB-S2 channel with H.264
video mplayer plays only the audio and reports:
TS file format detected.
VIDEO
because otherwise the mail is too big and needs moderator approval i
put the previously attached files here:
http://xkodi.svobodno.com/stb0899/nrjhits.tar.gz
http://xkodi.svobodno.com/stb0899/nrjhits_diseqc.tar.gz
http://xkodi.svobodno.com/stb0899/pro7hd.tar.gz
and cancel the posting of my
Hi,
Attached is a latest version of alternative driver for the Terratec
Cinergy T2 USB device. The driver is heavily based on existing Cinergy T2
driver but it has been modified to fit more or less into the DVB-USB
driver framework like most of the other USB-based device drivers currently
On 10/14/2007 12:11 AM, Oliver Endriss wrote:
P. van Gaans wrote:
Today I was testing some stuff and downloaded and installed the newest
v4l-dvb from hg. After a while I figured out that FTA channels on my TT
S-1500 still worked, but the CAM would not respond. I checked all
connections,
now it works, when i'm using -p switch, i missed that, thank you, Arthem!
about Q1 from my previous mail:
- what is the revision of STB0899 on your card?
- could you please run the same tests i described and report the
results for comparison.
thanks!
On 10/14/07, Artem Makhutov [EMAIL
Dear linux-dvb developers,
owning an HP rebranded Hauppauge Express Card shipped with several mid-high end
HP laptops I would like to give you some support in further improving cx23885
driver for it to support those tuners.
here are my card specs:
HP Hauppauge WinTv 885
model 77001 rev d4c0
Hi,
Unfortunately, Markus has pulled offline all his repositories
containing Linux drivers. (You can see
http://kerneltrap.org/mailarchive/linux-kernel/2007/10/14/337446 for
the reason). This mainly affects users of em28xx-based and
xc3028-based devices. I suggest those of you with local copies
Alexander E. Patrakov wrote:
Local news sites mention that
DVB-H is being tested, but these packets don't look like DVB-H payload,
because they are IPv4.
DVB-H can be with IPv4.
In Italy we have three different DVB-H providers, each is using IPv4.
Francesco
Hi,
changset 6293 (V4L: convert struct class_device to struct device) breaks
compiling for kernel 2.6.18.
--- a/linux/drivers/media/video/pvrusb2/pvrusb2-sysfs.c Mon Oct 08 12:20:02
2007 -0300
+++ b/linux/drivers/media/video/pvrusb2/pvrusb2-sysfs.c Mon Oct 08 16:26:13
2007 -0300
...
@@
Il Sunday 14 October 2007 17:06:38 Francesco Schiavarelli ha scritto:
I own a TT-3200 and I'm interested in receiving those kind of
signal. I understand that ATM is not possbile, but will it be in
the future? In other words it's an hardware or software/firmware
limitation?
thanks,
Francesco
On Thu, Oct 11, 2007 at 01:46:32PM -0500, David Engel wrote:
Notice the absence of an equivalent tuner 1-0061: chip found line
for saa7133[1]. This occurs with both the 2.6.21 and 2.6.22.*
kernels. I briefly tested analog and digital capture on both cards in
a separate system before
On Sun, 2007-10-14 at 16:03 +0200, Oliver Endriss wrote:
Soeren Sonnenburg wrote:
On Sat, 2007-10-13 at 23:52 +0200, Oliver Endriss wrote:
Soeren Sonnenburg wrote:
Dear all,
[...]
Did this card ever work before?
I just purchased it, so I cannot tell whether it ever worked
Nico Sabbi wrote:
Il Sunday 14 October 2007 17:06:38 Francesco Schiavarelli ha scritto:
I own a TT-3200 and I'm interested in receiving those kind of
signal. I understand that ATM is not possbile, but will it be in
the future? In other words it's an hardware or software/firmware
limitation?
Michael Harpe schrieb:
I have been working on debugging reception of a datacast for a while now.
I have determined that the data I am interested in is in PID 0x1af3. Here's
what I get from a dvbsnoop pidscan...
[...]
The section ID is 0x3F (decimal 63) and as you can see it's ISO/IEC
On Fri, 2007-10-12 at 02:24 +0200, Oliver Endriss wrote:
Soeren Sonnenburg wrote:
I am unfortunately 100% sure that it is caused by the saa7146 driver, as
I have an uptime of over a week now that it is not loaded (but the card
is still in the slot, yeah and I did memory tests for 18 passes
On Fri, 2007-10-12 at 02:49 +0200, hermann pitton wrote:
Hi,
Am Freitag, den 12.10.2007, 02:24 +0200 schrieb Oliver Endriss:
Soeren Sonnenburg wrote:
I am unfortunately 100% sure that it is caused by the saa7146 driver, as
I have an uptime of over a week now that it is not loaded (but
Nico Sabbi wrote:
Il Sunday 14 October 2007 17:06:38 Francesco Schiavarelli ha scritto:
I own a TT-3200 and I'm interested in receiving those kind of
signal. I understand that ATM is not possbile, but will it be in
the future? In other words it's an hardware or software/firmware
limitation?
Francesco Schiavarelli wrote:
I own a TT-3200 and I'm interested in receiving those kind of signal.
I understand that ATM is not possbile, but will it be in the future?
In other words it's an hardware or software/firmware limitation?
STB0899, STV090x, SkyPhy (Viasat's demod, iirc) based can
Artem Makhutov wrote:
Hi,
On Fri, Oct 12, 2007 at 06:24:05PM +0400, Manu Abraham wrote:
Hi,
Reinhard Nissl wrote:
Hi,
Manu Abraham wrote:
this Logfile looks a bit strange, and I can't tune to DVB-S2 channels.
DVB-S works fine.
I really have the feeling that this card is demaged
[EMAIL PROTECTED] wrote:
Hello List!
I just bought a Terratec Cinergy T USB XE, in good faith it would be
supported under Linux. Alas, the af9005 driver would not recognize it,
and bravely changing the USB ID in dvb-usb-ids.h didn't help, I got this
instead:
af9005: boot bad config
Oliver Endriss wrote:
Marcel Siegert wrote:
can everybody _please_ stop this unnessessary discussion?
Full ack! I'm really tired reading these garbage threads.
@all,
I suggest the following:
1a Review the API extensions (dvb_frontend.h).
1b Commit them.
2a Review dvb_core
hy,
i got trough warranty issues for my old vp1030 a new vp1034. i tried this card
now with this branch but the card can only tune to vertical channels
(horizontal are working in less than a second).
zapping to 5 'Pro7':
sat 0, frequency = 12051 MHz V, symbolrate 2750, vpid = 0x00a1, apid
Soeren Sonnenburg wrote:
On Sun, 2007-10-14 at 16:03 +0200, Oliver Endriss wrote:
Soeren Sonnenburg wrote:
On Sat, 2007-10-13 at 23:52 +0200, Oliver Endriss wrote:
Soeren Sonnenburg wrote:
Dear all,
[...]
Did this card ever work before?
I just purchased it, so I
Gernot Pansy wrote:
hy,
i got trough warranty issues for my old vp1030 a new vp1034. i tried this
card
now with this branch but the card can only tune to vertical channels
(horizontal are working in less than a second).
Uh. I forgot the GPIO bit flip from Marco, will apply it later, but
Soeren Sonnenburg wrote:
On Fri, 2007-10-12 at 02:24 +0200, Oliver Endriss wrote:
Soeren Sonnenburg wrote:
I am unfortunately 100% sure that it is caused by the saa7146 driver, as
I have an uptime of over a week now that it is not loaded (but the card
is still in the slot, yeah and I
Oliver Endriss wrote:
Manu Abraham wrote:
Oliver Endriss wrote:
@all,
I suggest the following:
1a Review the API extensions (dvb_frontend.h).
1b Commit them.
2a Review dvb_core modifications.
2b Commit them.
3 Commit drivers when they are ready for inclusion.
Will appreciate if you
thank you, the patch is working for me.
the time from starting initalizaiton until i get a lock is about ~400msec.
notz
On Sunday 14 October 2007 19:18:18 Manu Abraham wrote:
Gernot Pansy wrote:
hy,
i got trough warranty issues for my old vp1030 a new vp1034. i tried this
card now
Gernot Pansy wrote:
thank you, the patch is working for me.
the time from starting initalizaiton until i get a lock is about ~400msec.
In the ideal case according to the vendor, it should have been 300 - 350 mS
max.
But i guess 50 - 100mS deviation is peanuts compared to most other demods.
David Engel wrote:
The minor problem I mentioned earlier has to do with using the
saa7134-alsa module to capture sound directly from the card. A quick
glance at the driver source code looks like it shold support 32 and 48
kHz sampling rates. I've only been able to get 32 kHz working well so
Reinhard Nissl wrote:
Hi,
what does this message mean?
It appears multiple times per second while watching a channel (not a
specific one) with VDR.
It shouldn't matter. It's a bug. The LOCK LOSS register is valid only in DVB-S2
mode.
It's a simple thing, just need to move the read of
En/na [EMAIL PROTECTED] ha escrit:
Luca Olivetti says on his page that rev. 2 of the terratec cinergy t usb
xe does not use a af9005, and thus will not work with the af9005
firmware, of course; so I suspect I got one of these... What driver
should I try next?
Well, I don't know if the term
Morjens,
There is now Anysee E30 DVB-T driver with ZL10353 support added, based
information got from Heikki and Risto. I changed also method of
selecting hardware configuration from board id to trial and error
method as suggested. Please test and give feedback!
The patch has already been posted in May by Michael Möhle without getting
attention: http://linuxtv.org/pipermail/linux-dvb/2007-May/018007.html
Several users in the german vdrportal forum use this card, therefore the patch
is included in my LinVDR kernel package since months.
To patch should
On 10/14/07, Richard (MQ) [EMAIL PROTECTED] wrote:
Aidan Thornton wrote:
Hi,
Unfortunately, Markus has pulled offline all his repositories
containing Linux drivers. (You can see
http://kerneltrap.org/mailarchive/linux-kernel/2007/10/14/337446 for
the reason). This mainly affects users
hmm, i see now there are other channels i can't tune to. like this one:
zapping to 9 'TW1':
sat 0, frequency = 12662 MHz H, symbolrate 2200, vpid = 0x03f2, apid =
0x03f3
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal ff9c | snr ff02 | ber 016c |
Hi,
the script doesn't work properly when the KDIR given is outside the
kernel source tree, like it is for most distros which build differently
configured kernel images from the same source tree.
I've therefore hacked it like that:
diff -r 5b19ac1cddb5 v4l/scripts/make_config_compat.pl
---
Gernot Pansy wrote:
hmm, i see now there are other channels i can't tune to. like this one:
You really have a signal ? The frequency also seems quite a bit high
(although still in the spectrum) But the demodulator seems to think
that there is no signal at all.
Maybe too much attenuation at
chazim wrote:
Is there any reason he's apparently been posting V4L list boards, and,
not boards listed through Linux-dvb list?
No idea. I don't know when he last updated his website, though, I don't
think he has any bias against info from either list
Again, hoping Gunther saw that, and,
On Sunday 14 October 2007 23:40:22 you wrote:
Gernot Pansy wrote:
hmm, i see now there are other channels i can't tune to. like this one:
You really have a signal ? The frequency also seems quite a bit high
(although still in the spectrum) But the demodulator seems to think
that there is no
Am Sonntag, den 14.10.2007, 15:34 -0400 schrieb CityK:
David Engel wrote:
The minor problem I mentioned earlier has to do with using the
saa7134-alsa module to capture sound directly from the card. A quick
glance at the driver source code looks like it shold support 32 and 48
kHz
On Sun, Oct 14, 2007, Manu Abraham wrote:
You can have MIS in 2 cases again:
1) Transport Streams
a) When it is SIS, it is similar to our normal DVB-S transmissions
b) When it is flagged MIS in the Baseband Header, we have Multiple Streams.
When it is MIS, if the logical streams
Johannes Stezenbach wrote:
On Sun, Oct 14, 2007, Manu Abraham wrote:
You can have MIS in 2 cases again:
1) Transport Streams
a) When it is SIS, it is similar to our normal DVB-S transmissions
b) When it is flagged MIS in the Baseband Header, we have Multiple Streams.
When it is MIS,
Gernot Pansy wrote:
On Sunday 14 October 2007 23:40:22 you wrote:
Gernot Pansy wrote:
i have to verify, but it seems that these channels have all a low symbol rate.
22Msps is not a low rate. I guess something else is wrong. Have you looped
the cables in between multiple tuners ? such as (i
hello,
is dvbscan or scandvb working with tt s2-3200? i could not get it
working using latest multiproto or stb0899 (not -c5)... i'll get a lot
of kernel messages and finally get stb0899 get tired (in dmesg)
___
linux-dvb mailing list
Hi, Markus.
I got the news the em28xx codes was removed from the v4l-dvb repo,
but can the em28xx based tv cards still work under Linux kernel?
And does libtuner.so support both the em28xx based cards demod and
tuner in the future?
___
linux-dvb
Baha Baydar wrote
I've searched through the archives looking for any updates for support
for the ATI theatre 650 chipset/cards and haven't found much.
Has the recent release of video card documentation from AMD/ATI given
any indication that other chipset support is in the works?
I don't
Olin Atkinson wrote
Has anyone done any work on getting the
digital side working? I would love to help. I am an electrical engineer
who has worked as a java programmer for the last 11 years. I have some free
time and would like to play with this for the fun of it.
Stemming from an IRC
48 matches
Mail list logo
