Hi,
How do I get a patch incorporated into the dvb kernel section ?
After recently purchasing a LeadTek WinFast DTV Dongle I rapidly
discovered it was the variant that was not recognized in the kernel
i.e. as previously reported at:
Hi, I've just bought a Hauppauge WinTV Nova-T Stick (model 1156 italy).
It has no remote controller bundled within but it has got a IR sensor
that works good with freshly updated mercurial drivers. So why not to
try some of my tv remotes I've got? I started pressing random keys with
evtest running
Am Dienstag, 12. Februar 2008 schrieben Sie:
I added this to the wiki-page about A700:
http://www.linuxtv.org/wiki/index.php/AVerMedia_AVerTV_DVB-S_Pro_(A700)
Maybe we should rename the page to AverMedia_AverTV_DVB-S_A700 or anything
similar.
* Could you load saa7134 module of unpatched
En/na Matthias Schwarzott ha escrit:
On Monday 11 February 2008, you wrote:
En/na Eduard Huguet ha escrit:
En/na Matthias Schwarzott ha escrit:
On Samstag, 9. Februar 2008, Eduard Huguet wrote:
Hi, Matthias
Hi Eduard!
I've been performing
Hi all,
I've still been trying to get the inluded remote with my USB DVB-T Tuner
working. It's a Compro Videomate U500 - it useses the dibcom 7000 chipset.
After upgrading to Ubuntu 8.04 (hardy) I can now see the remote when I do a
cat /proc/bus/input/devices:
I: Bus=0003 Vendor=185b
On Mittwoch, 13. Februar 2008, Peter Meszmer wrote:
Am Dienstag, 12. Februar 2008 schrieben Sie:
I added this to the wiki-page about A700:
http://www.linuxtv.org/wiki/index.php/AVerMedia_AVerTV_DVB-S_Pro_(A700)
Maybe we should rename the page to AverMedia_AverTV_DVB-S_A700 or
anything
On Mittwoch, 13. Februar 2008, Eduard Huguet wrote:
Hi,
Here you have the dmesg output of modprobe saa7134 i2c_scan=1:
[ 773.619247] saa7133[0]: found at :00:09.0, rev: 209, irq: 23,
latency: 64, mmio: 0xf7ffa800
[ 773.619258] saa7133[0]: subsystem: 1461:a7a1, board: Avermedia A700
On Sonntag, 10. Februar 2008, Eduard Huguet wrote:
En/na Matthias Schwarzott ha escrit:
On Samstag, 9. Februar 2008, Eduard Huguet wrote:
Hi, Matthias
Hi Eduard!
I've been performing some tests using your patch for this card.
Right now neither dvbscan nor kaffeine are able to
Hi,
I'm interested in trying to get the MSI [EMAIL PROTECTED] A/D v1.1 card
working. There is a problem with firmware uploads to the TDA10046A chip
being unreliable. I wonder if someone could give an overview on how the
firmware upload process works from the point of view of the driver and
Hi,
Can you explain how you select those 4 positions ? DiSEqC commands or
tone/voltage changes ?
Also can you determine the input type of those positions (Hi/Low, H/V,
etc) ? A scenario to see when and why that happens, would be more useful.
P. van Gaans wrote:
Hi,
I've got a Technotrend
tir, 17.07.2007 kl. 07.45 +0200, skrev Oliver Endriss:
Oliver Endriss wrote:
Imho the interrupt processing was broken:
- The first I2C interrupt should be used to wake-up the task.
It does not matter that it takes some time until ERR in IIC_STA
will be updated. We don't need it.
-
En/na Matthias Schwarzott ha escrit:
On Sonntag, 10. Februar 2008, Eduard Huguet wrote:
En/na Matthias Schwarzott ha escrit:
On Samstag, 9. Februar 2008, Eduard Huguet wrote:
Hi, Matthias
Hi Eduard!
I've been performing some tests using your patch for
On Mittwoch, 13. Februar 2008, Eduard Huguet wrote:
En/na Matthias Schwarzott ha escrit:
On Sonntag, 10. Februar 2008, Eduard Huguet wrote:
En/na Matthias Schwarzott ha escrit:
On Samstag, 9. Februar 2008, Eduard Huguet wrote:
Hi, Matthias
Hi Eduard!
I've been performing some
(remove previous for clarity...)
Oops :D. Could you please elaborate a bit on this? I don't know what is
the LNB connector you are referring to. Plus, I don't have right now any
voltimeter, but if needed I'll grab one from work tomorrow.
So, as I started playing with my A700 card, I
Hello,
After trying to have it working under Mandriva 2008, it is not anymore
recognized (a in XP).
So I guess i have erased some data for identification.
Is there any way to restore the identification data (firmware ?) on a
DVB-T ?
All the best
Hi!
Am Sonntag, den 10.02.2008, 23:37 +0100 schrieb Per Blomqvist:
Thanx! Now it works!!
Watching some Danish (Dansk) channel, about Napoleon.
Thanx again, for mocking me up.. It was the channel.conf, that was wrong
The channel.conf -file that I used before, was 6 month old and from my
On Donnerstag, 7. Februar 2008, Peter Meszmer wrote:
Hello,
I'm watching this list for quite a while now, looking forward to see my
Avermedia AVerTV DVB-S Hybrid+FM supported.
This card looks very similar to the Avermedia AVerTV DVB-S Pro [A700], so I
tried the two existing patches. Finally,
Hi,
The firmware should be loaded each time the PC is cold booted.
Try turning off the machine (power down) for a minute or so and then
start it up again. This works for the Nova 500 DVB-T card.
Cheers
Shaun
On Wednesday 13 February 2008 17:33:14 paul fredéric wrote:
Hello,
After trying
Albert,
your dmesg output looks quite good. In fact, the only line that irritates me is
the line with
xc2028 4-0061: Error on line 1063: -5
This line indicates an i2c-communication problem with the tuner.
As it happens BEFORE the XC3028 firmware is loaded, it cannot have anything to
do with
Hi Hans, thanks for your answer, I say what I tryed;
your dmesg output looks quite good. In fact, the only line that irritates me
is the line with
xc2028 4-0061: Error on line 1063: -5
This line indicates an i2c-communication problem with the tuner.
As it happens BEFORE the XC3028 firmware
On 02/13/2008 03:01 PM, Doru Marin wrote:
Hi,
Can you explain how you select those 4 positions ? DiSEqC commands or
tone/voltage changes ?
Also can you determine the input type of those positions (Hi/Low, H/V,
etc) ? A scenario to see when and why that happens, would be more useful.
P.
The latest dib0700-firwmare is dvb-usb-dib0700-1.10.fw not
dvb-usb-dib0700-03-pre1.fw.
Patrick.
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Ok, both give the same error, the only one wich does not report any error is
the 0.1. Thanks.
Albert
2008/2/13, Patrick Boettcher [EMAIL PROTECTED]:
The latest dib0700-firwmare is dvb-usb-dib0700-1.10.fw not
dvb-usb-dib0700-03-pre1.fw.
Patrick.
That's what I supposed... So we must get working the 1.10. Thanks again.
2008/2/13, Patrick Boettcher [EMAIL PROTECTED]:
On Wed, 13 Feb 2008, Albert Comerma wrote:
Ok, both give the same error, the only one wich does not report any
error is
the 0.1. Thanks.
Just because it does not
Hi, folks
In my personal repository:
http://linuxtv.org/hg/~hhackmann/v4l-dvb-experimental/
you will find a driver that supports this card, DVB-T and DVB-S
It might also work for
- one section of the MD8800
- similar boards based on saa713x, tda10086, tda826x, isl6405
The board will show up
25 matches
Mail list logo