Peter Hartley wrote:
[Resending patch with proper signed-off-by and updated description, but
otherwise unchanged]
Dear Mauro,
please apply Peters patch, which allows to utilize the kernel demux
while recording TS.
Regards,
Andreas
___
linux-dvb
On Sat, Mar 01, 2008 at 12:20:05AM +, Andrea wrote:
Hi,
I've tried to add an extra argument to gnutv to set the size of the
dvb_ringbuffer via
DMX_SET_BUFFER_SIZE.
I have not really understood the difference between dvr and demux.
It seems that gnutv uses the dvr to read from the
Florian Lohoff wrote:
On Sat, Mar 01, 2008 at 12:20:05AM +, Andrea wrote:
on the dvr (I think), but it does not make much of a change. The ioctl call
returns success.
I've printed a lot of debug output (adding a few dprintk) and this is what I
see when I run gnutv.
Now, I set the
Thierry Lelegard wrote:
I'm trying to read from /dev/dvb/adapter0/dvr0.
The problem is that the process reading sometimes is not fast enough and
after a while I get errno
75 when I try to read from it.
On average the speed is ok, so it should work.
There must be a buffer behind dvr0 that
Hi,
I have reviewed my last week's quick shot patch and here is a new version.
The firmware I mentioned in the first patch is not needed, since it is
stored on the device itself.
I also got the black TT remote working with it. I had to set rc_interval
to 500, because the key repeats came in too
Hi there,
I've got the following card: http://www.twinhan.com/product_cable_2033.asp
I am running Ubunu 7.10 with kernel 2.6.22-14-generic
I have compiled and installed the latest drivers from http://jusst.de/hg/mantis
and it seems to detect the card correctly but when scanning for channels
Manu, I do not understand your response
I am using the TT3200 and so the stb0899 module will be required
I cannot see how make menuconfig can disable the stb0899 module as it is not a
recognised module in 2.6.23.137
Although if I ignore the errors, the modules appear to compile and then load
Rikard Wissing schrieb:
[ 4022.656841] mantis_frontend_init (0): Probing for CU1216 (DVB-C)
[ 4022.658236] TDA10021: i2c-addr = 0x0c, id = 0x7d
[ 4022.658238] mantis_frontend_init (0): found Philips CU1216 DVB-C frontend
(TDA10021) @ 0x0c
[ 4022.658240] mantis_frontend_init (0): Mantis
Hi,
i was wondering why i have a problem in my application that i need to
run scan once after loading the module, otherwise my DVBFE_SET_PARAMS
fails - I couldnt explain it until i looked into the kernel code - In
the dvb_frontend.c i see this code:
1738 case DVBFE_SET_PARAMS: {
1739
Manu Abraham wrote:
Seppo Ingalsuo wrote:
Simeon Simeonov wrote:
Did you try changing line 250 in mantis_dvb.c to:
if (!lnbp21_attach(mantis-fe, mantis-adapter,
LNBP21_PCL, LNBP21_ISEL)) {
I tried mantis-a9ecd19a37c9. Without the change success in
positioning was about
Changed the tuner to TDA10023 and it worked like a charm!
Thanks alot!
Best regards,
Rikard Wissing
Date: Sat, 1 Mar 2008 14:44:12 +0100
To: linux-dvb@linuxtv.org
From: [EMAIL PROTECTED]
Subject: Re: [linux-dvb] Tuning fails with Twinhan DVB-C
Hi,
I've understood a bit more how demux, dvr and rigbuffers work, but I still have
a couple of issues.
I've been studying tzap, which seems much easier than gnutv.
tzap opens the demux twice (audio and video) and then opens the dvr to read the
multiplexed data.
There are 3 ringbuffers
my brand new Dvico dual 4 dvb-t is a new revision
in the windows driver the new hw id of card its called a dual5
has a dib7070pb chip
i can get the card to load but comes up with no frontend under dmesg (by
changeing the usb id file form db78 to db98)
anyway
to get the wife to talk to me again
Manu, I do not understand your response
other words - you can forget about this warnings (not errors)
I am using the TT3200 and so the stb0899 module will be required
I cannot see how make menuconfig can disable the stb0899 module as it is not
a recognised module in 2.6.23.137
Hi
you can inroduce with the experimental version of HVR-4000 DVB-S2 DEMOD driver
on Darron Broad's home page
http://dev.kewl.org/hauppauge/experimental/
Igor
___
linux-dvb mailing list
linux-dvb@linuxtv.org
15 matches
Mail list logo