Am Montag 08 Oktober 2007 schrieb Antti Palosaari:
see attachment..
regards,
Antti
Adding it, thanks :)
Christoph
___
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Antti Palosaari wrote:
morjens
Here comes the second test version. It has now remote control support.
My next plan is to fix TDA10023 issue correctly. After that I will try
to add Anysee DVB-T support also. All Anysee devices seems to be
rather similar (demod tuner of course differs).
Dear all,
I am having problems with a full featured TT-1200 dvb-t (sometimes also
called technotrend dvb-t premium) card.
It does not find the frontend and if I manually fiddle with the code (I
simply had to remove the break in line 2176 of av7110.c in hg to allow
fallthrough) to make it load
Hi,
On Fri, Oct 12, 2007 at 06:24:05PM +0400, Manu Abraham wrote:
Hi,
Reinhard Nissl wrote:
Hi,
Manu Abraham wrote:
this Logfile looks a bit strange, and I can't tune to DVB-S2 channels.
DVB-S works fine.
I really have the feeling that this card is demaged
I experience
Jeps,
My board is not Plus model but plain DVB-T version without CI.
On PCB it says:
PCB509T
REV 1.61
and board id output is:
02 02 01
So it seems to be the same as reported by models with MT352?
BR,
Heikki
Antti Palosaari wrote:
Terve Heikki others
Thank you for reporting. That was not
Today I was testing some stuff and downloaded and installed the newest
v4l-dvb from hg. After a while I figured out that FTA channels on my TT
S-1500 still worked, but the CAM would not respond. I checked all
connections, re-inserted the CAM, reboot the computer but nothing would
help. My CI
heips,
hmm, now I am a little bit confused because there is this same id as MT352
board. Maybe this is not just board id, but some other value that differs
from design to design. Could it be firmware version...
There is matrix I have now:
board id model demodtuner module PCB version
0a
Hello List!
I just bought a Terratec Cinergy T USB XE, in good faith it would be
supported under Linux. Alas, the af9005 driver would not recognize it,
and bravely changing the USB ID in dvb-usb-ids.h didn't help, I got this
instead:
af9005: boot bad config header.
dvb_usb_af9005: probe of
Antti Palosaari wrote:
heips,
hmm, now I am a little bit confused because there is this same id as MT352
board. Maybe this is not just board id, but some other value that differs
from design to design. Could it be firmware version...
There is matrix I have now:
board id model demod
Hi Manu.
So here are my problems:
One problem still is that I haven't been
able to compile your branch lately. After a rather big effort,
I have given up, because I don't know that how long (days?) I have to
tweak it to make it compile for me.
So that's why it is currently hard to make and
I have been working on debugging reception of a datacast for a while now.
I have determined that the data I am interested in is in PID 0x1af3. Here's
what I get from a dvbsnoop pidscan...
dvbsnoop V1.4.00 -- http://dvbsnoop.sourceforge.net/
Soeren Sonnenburg wrote:
Dear all,
I am having problems with a full featured TT-1200 dvb-t (sometimes also
called technotrend dvb-t premium) card.
It does not find the frontend and if I manually fiddle with the code (I
simply had to remove the break in line 2176 of av7110.c in hg to
I have a couple WinTV-D cards. Has anyone done any work on getting the
digital side working? I would love to help. I am an electrical engineer
who has worked as a java programmer for the last 11 years. I have some free
time and would like to play with this for the fun of it.
Simon Baxter wrote:
Hi
I have a new TT-2300 DVB-C FF card with the associated CI module with
in-built IR receiver.
The IR seems to register fine:
dmesg:
input: DVB on-card IR receiver as /class/input/input3
It always registers, no matter whether there is an ir receiver or not.
...and
P. van Gaans wrote:
Today I was testing some stuff and downloaded and installed the newest
v4l-dvb from hg. After a while I figured out that FTA channels on my TT
S-1500 still worked, but the CAM would not respond. I checked all
connections, re-inserted the CAM, reboot the computer but
Marcel Siegert wrote:
can everybody _please_ stop this unnessessary discussion?
Full ack! I'm really tired reading these garbage threads.
@all,
I suggest the following:
1a Review the API extensions (dvb_frontend.h).
1b Commit them.
2a Review dvb_core modifications.
2b Commit them.
3 Commit
Hi folks :-)
Yesterday I upgraded the kernel of my c't-VDR 6 to 2.6.18.dfsg.1-13etch3, then
to 2.6.18.dfsg.1-13etch4 and had the same problem with both of them when
building the latest v4l-dvb from hg.
Unfortunately I hadn't tried compiling with the before working hg-release, so I
had quite a
OM Ugarcina wrote:
Alexander E. Patrakov wrote:
OM Ugarcina wrote:
Linux video capture interface: v2.00
PCI: Enabling device :00:1f.3 (0001 - 0003)
ACPI: PCI Interrupt :00:1f.3[C] - GSI 18 (level, low) - IRQ 20
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt
On Sat, 2007-10-13 at 23:52 +0200, Oliver Endriss wrote:
Soeren Sonnenburg wrote:
Dear all,
I am having problems with a full featured TT-1200 dvb-t (sometimes also
called technotrend dvb-t premium) card.
It does not find the frontend and if I manually fiddle with the code (I
Simon Baxter wrote:
Hi
I have a new TT-2300 DVB-C FF card with the associated CI module with
in-built IR receiver.
The IR seems to register fine:
dmesg:
input: DVB on-card IR receiver as /class/input/input3
It always registers, no matter whether there is an ir receiver or not.
oh, ok!
20 matches
Mail list logo