Hi,
I currently setup my second VDR box but it seems that the DVB cards is
not detected by the driver. The system boots via NFS and PXE boot, but
I don't think that this should be a problem.
I use kernel 2.6.20.
lspci -vv says:
00:0f.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01
Hello Hartmut,
* e9hack <[EMAIL PROTECTED]> [28-02-07 22:30]:
> Sorry, this has nothing to do with the problem of the Cinergy 1200 DVB-C
> card. The patch will not help. You have to find out the manufacturer of
> the card. The sub vendor id 0xffc2 isn't known. The sub vendor id comes
> from the ee
Hello Oliver,
* Oliver Endriss <[EMAIL PROTECTED]> [03-03-07 07:32]:
> If it still doesn't work, the subsystem id of your card might have been
> overwritten in the eeprom. This can be fixed using
> http://escape-edv.de/endriss/dvb/fix_eeprom.c
thx a lot, now the card is working fine again.
The co
Hi,
i have now very strange problems. All is working fine, tham vdr will
restart, now the computer will hang.
I restarted it manually, but if linux reboot the last message i can
read (load driver for Hauppauge Rev 2.1)
And than the following line:
PCI: Found IRQ12 for device 00:08.0
Tha
Hello Dariush,
* Dariush Forouher <[EMAIL PROTECTED]> [13-12-02 08:03]:
> I experienced the same problem with cvs from 6.12.02 and kernel 2.4.19.
> After exiting vdr there is a kernel panic while removing the driver
> ("Aiee killing interupt handler")
>
> Is this problem related to the "kdvb-fe"
Hi,
i have very strange problem. My computer is running fine a long time
and now it can not load the driver, if i do this, the pc will hang
completely.
If i compile the new cvs-head driver i get always the following
warningmessage:
/usr/src/linux-2.4.20/include/linux/modules/videodev.ver:10: warn
Hi,
When i switch the normal channels vdr is working fine, but now i will
switch to PayTv-Channels no picture is comming(i have a card)
When i switch the channels with tuxzap it's working fine, but with vdr it
isn't working. In my channel.conf i have the following entries:
Premiere 2:11798:h:0:2
Hi,
On Sun, 15 Jul 2001, Klaus Schmidinger wrote:
> Looks like you've got the APIDs wrong. The correct entries would be
>
> Premiere 2:11798:h:0:27500:1791:1792:0:1:11
> Premiere Action:11798:h:0:27500:1023:1024:0:1:20
>
> (Note that I've also added the Pnr's to give you access to the EPG ;-)
Y
Hi,
On Sun, 15 Jul 2001, Clemens Kirchgatterer wrote:
> have a look at the file permissions in /dev
>
> ls -l /dev/video*
>
> the user, as which you start the programms must have rw rights, AFAIK.
The problem is, that /dev/vid* not exist.
Gruss
Matthias
--
Info:
To unsubscribe send a mail
Hi,
On Sun, 15 Jul 2001, Klaus Schmidinger wrote:
> Here's what I've assembled so far from various postings here on the
> list (thanks to everybody who contributed data!):
THX...
Now with these settings i get a picture but the picture stand(at all
programms i will get the same picture).
Gruss
Hi,
On Sun, 15 Jul 2001, Matthias Fechner wrote:
> Now with these settings i get a picture but the picture stand(at all
> programms i will get the same picture).
So i unload the dvb-driver and load it new and now vdr is running fine.
It seems, that the wrong channellist make this Po
Hi,
On Sun, 15 Jul 2001, Clemens Kirchgatterer wrote:
> > The problem is, that /dev/vid* not exist.
>
> then the devices have to be made first with something like this:
>
> mknod -m 666 /dev/video c major minor // use usefull numbers for minor
> and major
But /dev/ost/video* exist. No i tried t
Hi,
wich tools i need to cut(view) .vdr Files and convert it to MPEG(But the
mpegs would be not greater than 1 GB).
Thanks for your answer.
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Hi,
can anyone give me a short Format-description from the epg.data, i will
write a little perl Script(to a mysqldb) with WebGUI.
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Hi,
On Sun, 15 Jul 2001, Jan Panteltje wrote:
> Are you using the new API (latest driver?)
> I think it no longer supports /dev/video
I am using version dvb-0.9.0 from cvs-tree.
I think this is the newest version.
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with
Hi,
On Sun, 15 Jul 2001, oho wrote:
> - do i have to compile a new kernel
Activate Video for Linux(as modul)
and i2c(as modul)
compile kernel(modules) and reboot.
> - which dvb driver version and vdr version
I am using version 0.9-20010618 it's working fine(no segmentation faults).
Also you
Hi,
how often save vdr the EPG to the file?
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Hi,
who can i set the time when I start the instant record?
The time of 2 hours is too short, can I set it manually to 3 hours?
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Hi,
On Mon, 16 Jul 2001, Klaus Schmidinger wrote:
> > who can i set the time when I start the instant record?
> > The time of 2 hours is too short, can I set it manually to 3 hours?
>
> stop = start + 200; // "instant recording" records 2 hours by default
> in config.c accordingly.
Thanks, th
Hi,
On Mon, 16 Jul 2001, Klaus Schmidinger wrote:
> > But I have some trouble in switching in Premiere World.
> > Sometimes on the screen are no picture and sound.
> > If i close vdr, unload the driver with make rmmod and start vdr with
> > runvdr, the picture and sound is ok.
> >
> > Is this th
Hi,
how can i found out, what pnr i must set to recieve EPG.
On all Sender the EPG is working fine, but at the Cinedoms I don't get any
EPG or the filmname.
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Hi,
so i tried to find out when the VDR is hanging(with hanging i mean you can
switch channel but no picture and sound).
I only switch PW-channels.
No driver: run vdr with runvdr.
switching channel -> ok
starting to play a recorded film.
stop; switching channel -> not ok
vdr hang. quit vdr and
On Mon, 16 Jul 2001, Matthias Fechner wrote:
> Hi,
>
> so i tried to find out when the VDR is hanging(with hanging i mean you can
> switch channel but no picture and sound).
>
> I only switch PW-channels.
>
> No driver: run vdr with runvdr.
> switching channel -
Hi,
On Mon, 16 Jul 2001, Klaus Schmidinger wrote:
> Please make sure that, in case this is an encrypted channel, you have set
> the 'Ca' parameter of that channel to the number of the card that can
> actually decrypt that channel (i.e. '1' in case you have only one card).
At all programms the c
Hi,
i solved now the problem.
The solution is, that the DVB-s card need very much energy.
Now i put it at second PCI-slot from right(look from buttom).
At this port is all working fine.
The problem with the energy is no problem with power supply.
It is a problem with the boards.
Philips say, it
Hi,
On Tue, 17 Jul 2001, Christoph Kuhmuench wrote:
>
> I've got a problem with the driver. After successful compilation I do a
> make insmod. When the driver module dvb.o is inserted I receive the error
> message:
>
> dvb.o: unresolved symbol kernel_flag
>
> I try to use the card under Red Hat
Hi Johannes,
On Tue, 17 Jul 2001, Johannes Schoeller wrote:
> how can i support the card directly. my soldering iron
> is already hot!! tell me what to do. :))
You can not support your card with energy, this must do Hauppage or
Siemens...
Or it is better to say i don't how to do it.
Gruss
Matt
Hi,
On Tue, 17 Jul 2001, ADiab wrote:
> second when viewing a movie or song lot of cuts as if week signal "signal is
> 84% and no error at all" and some time freeze the picture only sound on,
> even if I jump to deff channel same freeze picture only sound change of the
> new channel, need to clo
Hi,
On Tue, 17 Jul 2001, Joerg Riechardt wrote:
> Hello,
> coulnd`t that be an IRQ problem?!
> Jörg
definitly no, because at this time the dvb-s card must share there IRQ
with the Highpoint-controller(UDMA-100 controller).
In spite of sharing the IRQ between DVB-S Card and HPT-Controller is the
Hi,
is timeshofting with one DVB-s Card possible.
What i want?
Start a recording and watch this recording on TV(recording is running
parallel).
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Hi,
how can i reinsert a film?
I record a film, than i copy the film to an other PC. I delete the film
with VDR from the HDD.
Than I copy the film back to the computer and restart VDR, but the film
didn't appear in in the recorded films, so i can't view the film and
cannot cut the film.
Which
Hi,
On Tue, 17 Jul 2001, Klaus Schmidinger wrote:
> You need to create the same directory/file structure as the original
> recording had, for example
>
> /video
> /video/nano
> /video/nano/2001-07-17.18:28.10.05.rec
> /video/nano/2001-07-17.18:28.10.05.rec/index.vdr
> /video/nano/2001-07-17.18:2
Hi,
On Wed, 18 Jul 2001, [iso-8859-1] Mel Schaechner wrote:
> Did you compile vdr the default way or using VFAT=1 ?
No, i didn't, i compiled it new.
> the character ":" in a file- or directory name.
Yes, that was the problem, my ftp-client on windows replace the ':' with
an '_'. I fixed it no
Hi,
i copy back a film and now i have a problem to play it. I start the play
and VDR only play the first frame maybe a little bit more and then it
start to play the next file and so on.
Here is the log:
-
Jul 20 16:52:06 idefix kernel: lirc_serial: AI: 0 1 3b584596 3b584581
deacd
Hi,
On Sun, 22 Jul 2001, Klaus Schmidinger wrote:
> > -
> > Jul 20 16:52:06 idefix kernel: lirc_serial: AI: 0 1 3b584596 3b584581 deacd
>65b3e
> > Jul 20 16:52:11 idefix vdr[4588]: replay /video/bla/2001-07-15.14.14.50.50.rec
> > Jul 20 16:52:11 idefix vdr[4588]: playing
>'/vid
Hi,
i know that some people post that they have problems with playing a
recorded film and then try to switch channels.
I switch only in PW and i have the same problem.
I'am using the driver per CVS from 12:30 and VDR(new newest tar.gz from
Website).
Is this problem be solved?
Or can anyone giv
Hi,
On Tue, 24 Jul 2001, ian nom wrote:
> Slightly lost and appreciative of any help,
Why you are using tuxzap, take VDR and you would be happy.
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Hi,
On Tue, 24 Jul 2001, Gerhard Achs wrote:
> I think that Gerhard means that the OSD isn't cleared, before we display
> something new ...
I have the same problem, i update the driver(use the cvs-tree) and now it
is working fine.
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAI
Hi,
On Tue, 24 Jul 2001, [iso-8859-1] Jørgen Tvedt wrote:
> cvs -d :pserver:[EMAIL PROTECTED]:/cvs/linuxtv /DVB/driver
Maybe you must do before this commando:
cvs -d :pserver:[EMAIL PROTECTED]:/cvs/linuxtv login
At password press only enter.
Gruss
Matthias
--
Info:
To unsubscribe send a ma
Hi,
On Wed, 25 Jul 2001, Jens Hauser wrote:
> Nobody out there having a problem with LIRC not showing a menu while keys 0-9
> still work? I have only changed to VDR 0.84 & DVB driver 0.9 patched by Klaus
Lirc is working fine for me.
Have you load the kernel_modul?
Try mode2 and than press a but
Hi,
On 25 Jul 2001, Stefan Huelswitt wrote:
> right - start fast forward with speed 3x
> right - accelerate to speed 6x
> right - accelerate to speed 12x
> left - slow down to speed 6x
> Anybody else who would like this?
Oh, yes i think this were a very nice feature.
Gruss
Matthias
--
Inf
Hi,
On Wed, 25 Jul 2001, Peter Seyringer wrote:
> I have a problem with my irdeto modul. After starting vdr my cam works correct.
I can switch between all channels. After i have played a recorded film i can only
watch the last coded channel. If i switch to an other coded channel, it doesn't
work
Hi,
On 28 Jul 2001, Stefan Huelswitt wrote:
> Consider this patch BETA. Any comments, bug reports and
> suggestions welcome.
It is running on my System wunderfull.
Thanks for this patch!
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
Hallo Klaus,
On Sun, 29 Jul 2001, Klaus Schmidinger wrote:
> Have fun!
I think all is working fine, but i miss the patch to adjust the speed(for
fast forward...).
Maybe you can put this code into VDR.
But i have the problem with play a recorded film and then switch
channels(but i think this i
Hi,
On Sun, 26 Aug 2001, Peter Seyringer wrote:
> i think with todays cvs and vdr 0.85 the problem with the cam and playing in
> vdr is solved. Now it needs longer time after playing a scene to show the
> actual channel but after replay i can switch between coded channel without
> problems.
Yes
Hi,
On 31 Jul 2001, Stefan Huelswitt wrote:
> The code is experimental and I don't know if it breaks something
> else. So be warned. Anway I would like to get some feedback,
> how good it works for other (or if it works at all).
It seems to work fine.
Thanks for this patch.
Gruss
Matthias
-
Hi,
On Tue, 31 Jul 2001, Guido Fiala wrote:
> Just to problems appear to me:
>
> 1. it broke the skip +1min -1min functionality
Oh yes i have the same problem.
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Hi,
On 31 Jul 2001, Stefan Huelswitt wrote:
> This should fix it:
Now i can forward and backward one minute.
Thanks for this very fast patch.
If all is ok can i say this evening, i am going to bed now.
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscri
Hi,
On Sun, 5 Aug 2001, Marc Schumann wrote:
> Make insmod works correkt, lsmod shows the modules. After a reboot there are
> none of them .
You must reload the modules on every startup, write a script or better run
runvdr.
> then changing to apps/tuxzap trying autoconf it breaks with
> con
Hi Klaus,
have you changed the format of the epg.data?
With my old script i cannot read this filem to import it into a database.
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
HI,
On Thu, 9 Aug 2001, Klaus Schmidinger wrote:
> I am not aware of any changes to that format.
I make a debug to the script and the script is working fine, maybe PW send
no new films.
At this time i have 9417 different films in my mysql-db.
Gruss
Matthias
--
Info:
To unsubscribe send a m
Hi Klaus,
On Sun, 26 Aug 2001, Klaus Schmidinger wrote:
> The new version 0.93 of the Video Disk Recorder project
> is now available at
>
> http://www.cadsoft.de/people/kls/vdr/download.htm
I tried to compile it, but i get the following errormessage:
---
g++ -g -O2 -Wall -Woverloade
Hi,
On Sun, 26 Aug 2001, Alexander Wetzel wrote:
> It didn't compile on my system until I add
> #include
> in tools.c
That helps, now it compile on my Debian.
The new feature with the date and time is great!
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "un
Hi,
which parameter i must set that my recordings never will be deleted?
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Hi Klaus,
On Wed, 29 Aug 2001, Klaus Schmidinger wrote:
> DefaultPriority = 50 The default Priority and Lifetime values used when
> DefaultLifetime = 50 creating a new timer event. A Lifetime value of 99
When i set this two parameters to 99 will be all recordings halt?
Or the recordings
Hi,
i want to install a second computer with a DVB-Card, i tried to compile
the driver, but i do everthing false.
i do make and get the following error-message:
--
gcc -D__KERNEL__ -I/usr/src/kernel-source-2.4.8/include -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer
-fn
Hi,
On Sat, 1 Sep 2001, Rolf Siebrecht wrote:
> Did you execute 'make zlilo',..., 'make modules_install',... after 'make
> [x|menu]config'?
Now it is running i reboot the machine several times and install some
packages.
Thanks.
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL
Hi,
now my new computer is running, i copied the old films to my new computer,
but i i try to playback one film it will start an end one second later.
In the logfile is:
-
Sep 1 15:20:05 video vdr[356]: replay
/video/%Coyote_Ugly/2001-07-20.17.00.50.99.rec
Sep 1 15:20:05 video vdr[356]: pl
Hi Klaus,
On Sat, 1 Sep 2001, Klaus Schmidinger wrote:
> Are you sure there is actual data in the files?
Yes i'am sure.
> Please send the output of
>ls -l video/%Coyote_Ugly/2001-07-20.17.00.50.99.rec
The output is:
--
video:/video# ls -l /video/%Coyote_Ugly/2001-07-20.17.00.50.99.rec
Hi Klaus,
On Sat, 1 Sep 2001, Klaus Schmidinger wrote:
> I can't imagine whiy VDR would replay the files in this sequence
> Could it be that there is something wrong with the index.vdr files
> of the recordings that can't be replayed?
> Please try renaming these files and replay then. Without th
Hi Klaus,
On Sat, 1 Sep 2001, Klaus Schmidinger wrote:
> I believe somebody here on the list wrote about a program he has
> that generates the index from an existing recording.
I will ask, thanks for your help.
> How did the files get damaged in the first place?
I have no idea. I copied the f
Hi,
i search a programm to recreate the index.vdr from the .vdr files.
If you have such a programm please send it to me.
Thanks.
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Hi,
On Sat, 1 Sep 2001, Klaus Schmidinger wrote:
> There has been no change in the format of index.vdr.
Than it must be a fault on my side.
Thanks for your really quick help Klaus.
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
sub
Hi,
i wont to rip DVD's(i can do it with a Windows-programm or a
linux-program) and store it at /video.
Is it enough to rename the vob-files or must i do anything else?
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "unsubscribe linux-dvb" as
subject.
Hi,
On Sun, 2 Sep 2001, Roland Praml wrote:
> Search for "genindex" or "Rebuilding index.vdr" in the mailing list:
> http://www.linuxtv.org/cgi-bin/htsearch
>
> there are some different versions, one works better for VDR-Files the other
> better for VideoCD-Files
Thanks for this tip, i found a
Hi,
On 2 Sep 2001 [EMAIL PROTECTED] wrote:
> In one of my earlier postings i described how
> to do that (e.g. you have to use vstrip and
> tmpgenc in windows). Have a look at the archives.
I searched in the archives but i cannot found something, please can you
give me the subject or something e
Hi,
On Sun, 2 Sep 2001, Matthias Fechner wrote:
> I searched in the archives but i cannot found something, please can you
> give me the subject or something else?
Now i found a message about it.
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "
Hi,
On Sun, 2 Sep 2001, Sergei Haller wrote:
> On Sat, 1 Sep 2001, Matthias Fechner wrote:
>
> > I have no idea. I copied the files via FTP to a windowscomputer and
> > yesterday i copied the files back to my new vdr-computer :-).
> >
>
> I suppose, the ftp client
Hi,
On Thu, 6 Sep 2001 [EMAIL PROTECTED] wrote:
> But there is another solution. The AV7110/7110 contain a DVB hardware
> descrambler. There would be several advantages to develop CAM software :
Is the AV7110/7110 on every DVB Card or need you a extra piece of
hardware?
The idea is very good.
Hi,
now i tried to encoding a DVD to replay it with VDR.
I reencoded the MPEG-Stream at 720x576 with 2MBit average and 4 MBit max
videorate. I encoded audio with 128kBit.
Than i muxed it, but when i tried to replay it with VDR i only hear audio,
but the screen is black.
I tried to multiplex it
Hi,
On Sun, 9 Sep 2001, Richard Reuters wrote:
> Hi,
>
> replay of MPEG-streams generated by MPLEX is broken for me since vdr-0.92
> (or 0.91?). I only hear sound and see no video. See my msg one or two weeks
> ago.
I used to multiplex bbmeg, it is a windows tool and the best muxer.
Under Windo
Hi Klaus,
can you help me?
I must mux an audio and video stream my problem is, i don't know what
settings VDR need to play the MPEG-Stream.
I use to multiplex a windows-tools it's name is bbmpeg.
The following settings are available:
Checkboxes: VBR, Add SVCD scan offsets, User Private Stream2,
Hi,
On Sun, 9 Sep 2001, Marcus O.C. Metzler wrote:
> It may be that you have used a resoltion framerate combination that
> the DVB hardware can not decode.
I used a standard DVD-resolution 720x576 at 25 fps.
This cannot be a problem, because PW send in this resolution also.
I think the packsize
Hi,
On Sun, 9 Sep 2001, Klaus Schmidinger wrote:
> All I know is what it takes to record the data from the DVB card and to
> later replay it. I have no experience with any remultiplexing (especially
> under Windows).
VDR must save the MPEG-Stream in a format, or will do this the DVB-driver?
And
Hi,
On Sun, 9 Sep 2001, Marcus O.C. Metzler wrote:
> The pack size shouldn't be a problem. Do you get the same results when
> you use the mplex utility that comes with the driver?
This i will try later.
> Try pes2vid | ntuxplayer -o with the file you created.
Can i replay it on an other mach
Hi,
On Sun, 9 Sep 2001, Marcus O.C. Metzler wrote:
> Try pes2vid | ntuxplayer -o with the file you created.
So now i can compile and start it, if i start it with the file:
./pes2vid /video/blade-dvd/2001-09-09.12.12.50.99.rec/001.vdr |ntuxp
layer -o
It will start and running for 3 seconds, th
Hi,
On Sun, 9 Sep 2001, Alfred Zastrow wrote:
> sleep 10 ; ./pes2vid /video/blade-dvd/2001-09-09.12.12.50.99.rec/001.vdr
> |ntuxplayer -o
Oh yes, .. is clear. ;-)
Maybe I found a solution or the error.
I make a streamtype on the original File and one the new muxed file and i
found maybe t
Hi,
On Sun, 9 Sep 2001, Frank Meurer wrote:
> while true; do ./pes2vid /video/blade-dvd/2001-09-09.12.12.50.99.rec/001.vdr \
> |ntuxplayer -o;done
So i tried it, but on tv is all black and no sound is playing.
Gruss
Matthias
--
Info:
To unsubscribe send a mail to [EMAIL PROTECTED] with "un
Hi,
On Mon, 10 Sep 2001, Johannes Schoeller wrote:
> du kannst mit bbmpeg die .vdr files direkt
> remuxen? mir ist das nicht gelungen. oder
> hab ich dich da falsch verstanden?
No to demultiplex the files i use pvastrumento.
To multiplex the files i use bbmpeg, but the mutliplexing isn't workin
Hi,
so i tried a lot of thinks.
I multiplexed the files as DVD, as MPEG-Stream(SVCD is not possible, the
datarate is to high) with bbmpeg.
But on all this tries i here only audio, but no picture.
I tried to replay it with ntuxplayer, but now chance, ntuxplayer start and
end after 3-8 seconds, bu
Hi,
On Mon, 10 Sep 2001, Arpi wrote:
> Did you tried with mplayer-CVS ?
Yes, it play the mpeg absolutly fine.
> Upload a small (10-20MB) part of it to ftp://mplayerhq.hu/MPlayer/incoming
> I'll check.
You have a mpeg in vdr_from_matthiasf.
Please test it with vdr, maybe it is a problem of my
Hi,
On Mon, 17 Sep 2001, Gerhard Achs wrote:
> I know that this is the LINUX-dvb mailing list ;-), but has anyone a
> system running FreeBSD and the DVB-C card ?
I think this is not possible, because the DVB-Driver is written for the
Linux-Kernel.
Gruss
Matthias
--
Info:
To unsubscribe sen
Hi,
On Mon, 17 Sep 2001, Deti Fliegl wrote:
> it took a while to analyze some problems with the DVB driver. An now
> here a patch that fixes the following stuff:
>
> -- No attachments (even text) are allowed --
> -- Type: application/octet-stream
> -- File: dvb_firmware.patch
Please, can you gi
Hi,
On Mon, 17 Sep 2001, Rienecker, Fa. Evenio, ITS P, M wrote:
> German Telekom provides private channels.
> But there is no broadcast of private channels in digital format (only
> analog).
The telekom cable is full, no space for additional frequences.
I build a satelitte on my house and all i
Hi,
On Mon, 10 Sep 2001, Marcus O.C. Metzler wrote:
> The DVB card can play all MPEGs according to the Main Profile@ Main
> Level (MP@ML) specifications. Ralph has posted the resolutions on this
> list before.
> It can only scale 704x576, 544x576, 480x576, 352x576, and 352x288 to
> 720x576 in PA
Hallo Felix,
* Felix Domke <[EMAIL PROTECTED]> [29-09-01 21:43]:
>
> Please keep in mind that the use of this program is just ILLEGAL since you
> don't own a SECA-license.
>
> As always, the expensive thing is the LICENSE you buy (if you own a CI) and
> not the hardware itself.
Yes that is clea
Hi,
* Matthias Fechner <[EMAIL PROTECTED]> [11-10-01 15:41]:
> Hi,
>
> now i encoded a dvd, remultiplexed it and copied it to my
> VDR-Computer. But i have the problem that i cannot generate an
> index.vdr.
>
> If i replay the 2 Mpegs(without index.vdr) it is worki
Hello Daniel,
* Daniel Schneider <[EMAIL PROTECTED]> [03-01-02 11:10]:
> the external connector? RGB and S-Video (Y-C) output? Composite
> output is not worth talking about, the video quality suffers a lot
> when output over composite.
I have a haupauge DVB-s Card Rev 2.1.
I use the composite
Hello Koch,,
Maybe it is better two write you firstname and than your name?
* Koch, Steffen <[EMAIL PROTECTED]> [03-01-02 12:03]:
> > My opinion is, i can't see any qualitiy differences.
> are you using rgb-out of your dvb-s receiver??
I tried it with rgb and svhs over a very good scartcable,
Hello Daniel,
* Daniel Schneider <[EMAIL PROTECTED]> [03-01-02 12:21]:
>
> Everyone who knows about video technology knows that there are
> quality problems when video is transported over one single output
> line, these can't be avoided other than by using two (S-Video, Y-C)
> or three (RGB
Hallo Matthias,
* Matthias Lötzke <[EMAIL PROTECTED]> [19-01-02 12:12]:
> Hello!
>
> I am sorry to inform you that it is definitly not possible to get RGB or
> S-video signals out of a DVB-s rev 2.1 card. The necessary signals are
> not transported out of the DSP.
But if i create this lines,
Hello mocm,
* [EMAIL PROTECTED] <[EMAIL PROTECTED]> [06-02-02 23:33]:
> I have been using the IR adapter that I bought for my Asus board with
> lirc for a long time. Recently, I got a new Epox board which also had
> an IR connector on board, I tried the Asus connector and it worked
> there too. T
Hi,
i have upgraded my computer and completely install a new linux.
Than i put my two dvb-s cards into it and try to compile the driver,
but i get error messages and have no idea, what the problem is.
I am going into driver and type make:
--snip--
...
gcc -D__KERNEL__ -I/usr/src/linux-2.4.18/inc
93 matches
Mail list logo