Thanks Sergei. I tested with 0x0407. There is still no interrupt
generated from the controller. The following are the register values
after soft reset of the SATA port. Any idea for no interrupt from SATA
controller?
Thanks for your help,
Successfully done SATA_DoSoftReset loop = 1388
Hello.
Mike Zheng wrote:
From PCI config space, the VENDOR_ID and DEVICE_ID are correct for my
driver. However the PCI_COMMAND register of 88SE6121 I got is 0x7,
which is the same as default value. Based on the document, it has to
be 0x0207 to enable interrupt. However I always failed to do
Hi All,
I am doing development of device driver of 88SE6121 on Kernel 2.4 for
PowerPC 8568 board, which is a BIG endian CPU.
From PCI config space, the VENDOR_ID and DEVICE_ID are correct for my
driver. However the PCI_COMMAND register of 88SE6121 I got is 0x7,
which is the same as default
