well ...
I started to install a new woody system on my computer
but I'm having problems start my adsl connection
when pppoeconf try to activate the connection I get ...
ppp0: error fetching interface information
I think I should do a route command, but I don't remmember what
pls help :(
Eli
I was looking for a way to do this for quite sometime. The problem is
that LaTeX interprets the '$' in $Id$ as enter math mode and thus
doesn't render the CVS Id string appropriately. A nice hack is to do:
$ $Id$ $
Works like a charm!
--
Muli Ben-Yehuda
http://www.mulix.org
pgp0.pgp
Hi all,
All of you have probably heard a lot about the planned Linux conference
of People and Computers, with Oracle/Sun/others.
If anybody still doesn't know, the original date (March 6) is not
relevant anymore (several weeks ago, some people thought that the war
would start on March 3, so
More details ...
kernel 2.4.19
and with lsmod there is a kmodule mii that sits on my ethernet card ...
- Original Message -
From: Eli Segal [EMAIL PROTECTED]
To: Linux-IL [EMAIL PROTECTED]
Sent: Sunday, March 02, 2003 10:21 AM
Subject: ADSL problems
well ...
I started to
I've installed samba last friday
and everywhere i read they tell you to name the netbios
but when i named it i couldnt see the server
what am i missing ??
Eli
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word
One trick I use when a console locks is to log in via the network
and just run chvt. On Slackware, for example, X runs on VT2,
and a spare console on VT6. Usually I only need to 'chvt 6; sleep
5; chvt 2' and I regain control. (Only 'chvt 6' is needed, but why
not change it back?)
One thing I
Hi
I tired to install the gentoo /unreal 1.4.1 live on a cyrix 300 machine
with 256MB RAM and a 8GB HDD .
it went well until i got to the second tar ball and tried to bootstrap the
system.
I've been working with the install file that comes with the CD .
i thought at fist that the problem is
On Sat, 1 Mar 2003, Hetz Ben Hamo wrote:
Hi,
I'm probably too tired today and I cannot see any problem with this alias
stored in my .bashrc:
Hetz, I think a function would be better than an alias in this case.
mcm()
{
make -f Makefile.cvs
./configure
On Sun, Mar 02, 2003, Muli Ben-Yehuda wrote about TIP: using CVS keyword in LaTeX
documents:
I was looking for a way to do this for quite sometime. The problem is
that LaTeX interprets the '$' in $Id$ as enter math mode and thus
doesn't render the CVS Id string appropriately. A nice hack is to
On Sun, Mar 02, 2003 at 11:40:25AM +0200, Nadav Har'El wrote:
On Sun, Mar 02, 2003, Muli Ben-Yehuda wrote about TIP: using CVS keyword in LaTeX
documents:
I was looking for a way to do this for quite sometime. The problem is
that LaTeX interprets the '$' in $Id$ as enter math mode and thus
Hetz Ben Hamo [EMAIL PROTECTED] writes:
Hi,
I'm probably too tired today and I cannot see any problem with this alias
stored in my .bashrc:
alias mcm=make -f Makefile.cvs ; ./configure
--with-openssl-dir=/usr/local/ssl ; make (it's all in 1 line)
Problem is simple - when I run mcm -
On Sun, Mar 02, 2003, Muli Ben-Yehuda wrote about Re: TIP: using CVS keyword in LaTeX
documents:
\verb$Id$
True. However, \verb apparently can't be used as a command
argument. See http://www.ecn.purdue.edu/users/notz/latex-cvs.html.
So, any other cool latex tricks? Or do I have to open
Muli Ben-Yehuda [EMAIL PROTECTED] writes:
I was looking for a way to do this for quite sometime. The problem is
that LaTeX interprets the '$' in $Id$ as enter math mode and thus
doesn't render the CVS Id string appropriately. A nice hack is to do:
$ $Id$ $
Works like a charm!
Can you
On Sun, Mar 02, 2003 at 11:53:14AM +0200, Oleg Goldshmidt wrote:
Muli Ben-Yehuda [EMAIL PROTECTED] writes:
I was looking for a way to do this for quite sometime. The problem is
that LaTeX interprets the '$' in $Id$ as enter math mode and thus
doesn't render the CVS Id string
On Sun, Mar 02, 2003, Oleg Goldshmidt wrote about Re: TIP: using CVS keyword in LaTeX
documents:
I also suppose you don't need spaces: $$Id$$ will work...
Actually, $$ is TeX for start an equation on a seperate line, so it
won't work as you expect.
--
Nadav Har'El|
On Sun, 2 Mar 2003, Muli Ben-Yehuda wrote:
On Sun, Mar 02, 2003 at 11:40:25AM +0200, Nadav Har'El wrote:
On Sun, Mar 02, 2003, Muli Ben-Yehuda wrote about TIP: using CVS keyword in LaTeX
documents:
I was looking for a way to do this for quite sometime. The problem is
that LaTeX
Nadav Har'El [EMAIL PROTECTED] writes:
Doesn't \protect fix that? E.g., try
\chapter{\protect\verb+$Id$+}
(again, I didn't try it).
I don't think it will work. Nor would defining a \newcommand work.
--
Oleg Goldshmidt | [EMAIL PROTECTED]
On Sun, 2 Mar 2003, Nadav Har'El wrote:
On Sun, Mar 02, 2003, Muli Ben-Yehuda wrote about Re: TIP: using CVS keyword in
LaTeX documents:
\verb$Id$
True. However, \verb apparently can't be used as a command
argument. See http://www.ecn.purdue.edu/users/notz/latex-cvs.html.
So, any
Nadav Har'El [EMAIL PROTECTED] writes:
On Sun, Mar 02, 2003, Oleg Goldshmidt wrote about Re: TIP: using CVS keyword in
LaTeX documents:
I also suppose you don't need spaces: $$Id$$ will work...
Actually, $$ is TeX for start an equation on a seperate line, so it
won't work as you expect.
On Sun, 2 Mar 2003, Shlomi Fish wrote:
So, any other cool latex tricks? Or do I have to open latex-il first?
;-)
I remember seeing a Hebrew TeX mailing list somewhere. I don't know if
general TeX and LaTeX questions are accepted there.
IvriTeX:
My contribution to the junk pile:
- Several 10Mb combo network cards (ISA)
- 10b2 (yes, with a BNC connector only) net card (ISA)
- Buslogic SCSI adapter (ISA)
- 33.6k modem/sound card combo (ISA)
- ~10 EDO RAM chips (in sizes from 1MB to 8MB)
- several soundblaster sound cards (ISA)
- 22.8k
Eli ,
It depends on what you are trying to do.
If you have a WINS server on your network just enter wins server =
ip-address-of-wins
in smb.conf
In any case there are several parameters you can set up to propogate your
computer's nebios name
master browser = yes is one of them (if i recall
On Sun, Mar 02, 2003 at 10:31:17AM +0200, Muli Ben-Yehuda wrote:
I was looking for a way to do this for quite sometime. The problem is
that LaTeX interprets the '$' in $Id$ as enter math mode and thus
doesn't render the CVS Id string appropriately. A nice hack is to do:
$ $Id$ $
Works
This is a re-send. The original message was encoded in base-64.
Dear List
Below is an example taken from the Linux Advanced Routing Traffic Control HOTWO.
My question is just below that.
tc qdisc add dev eth0 root handle 1: htb default 30
tc class add dev eth0 parent 1: classid 1:1 htb rate
On Sun, Mar 02, 2003 at 12:01:19PM +0200, Shlomi Fish wrote:
So, any other cool latex tricks? Or do I have to open latex-il first?
;-)
I remember seeing a Hebrew TeX mailing list somewhere. I don't know if
general TeX and LaTeX questions are accepted there.
Sure they are - if Marc says
Dekel Tsur [EMAIL PROTECTED] writes:
There is no need for such dirty tricks. You can use the rcs or
rcsinfo packages.
I remember trying those once. I ended up pulling all sorts of
dependencies and could never make it work right. Besides, IIRC they
are not standard, and thus are not
On Saturday 01 March 2003 10:47 am, Assaf Flatto wrote:
Hi
I tired to install the gentoo /unreal 1.4.1 live on a cyrix 300 machine
with 256MB RAM and a 8GB HDD .
Now WHY would a sane person tries to install a distribution which needs to
compile itself in order to optimize? do you know how
On Sun, 2003-03-02 at 15:52, Hetz Ben Hamo wrote:
If you're going to install Linux on it, use one of those variant Linux
distributions and NOT Red Hat 8.x or Mandrake 9.x ! You cannot even boot them
since they're optimized for i586 - and your Cyrix barely passes the 486
(although it's
On Sun, Mar 02, 2003 at 12:46:42PM +0200, Dekel Tsur wrote:
On Sun, Mar 02, 2003 at 10:31:17AM +0200, Muli Ben-Yehuda wrote:
$ $Id$ $
There is no need for such dirty tricks.
You can use the rcs or rcsinfo packages.
Neither of which is installed with tetex by default.
Nonetheless, I took
On Sun, Mar 02, 2003 at 01:59:28PM +0200, Oleg Goldshmidt wrote:
Dekel Tsur [EMAIL PROTECTED] writes:
There is no need for such dirty tricks. You can use the rcs or
rcsinfo packages.
I remember trying those once. I ended up pulling all sorts of
dependencies and could never make it work
- Original Message -
From: Eli Segal [EMAIL PROTECTED]
To: Linux-IL [EMAIL PROTECTED]
Sent: Sunday, March 02, 2003 10:35 AM
Subject: Re: ADSL problems
More details ...
kernel 2.4.19
and with lsmod there is a kmodule mii that sits on my ethernet card ...
- Original
Re rcs LaTeX package:
Apparently there was a very recent revision, so maybe it causes less
headache now. In any case, it is IMHO not a very good idea to share
your LaTeX source with someone if it depends on a non-standard
package
--
Oleg Goldshmidt | [EMAIL PROTECTED]
On Sun, Mar 02, 2003 at 02:39:11PM +0200, Oleg Goldshmidt wrote:
Apparently there was a very recent revision, so maybe it causes less
headache now. In any case, it is IMHO not a very good idea to share
your LaTeX source with someone if it depends on a non-standard
package
This is just
Damn, I could use an ISA soundblaster... hehe
Couldn't find one anywhere!
Eli
On Sun, 02 Mar 2003 12:20:23 +0200, Aviram Jenik [EMAIL PROTECTED] wrote:
My contribution to the junk pile:
- Several 10Mb combo network cards (ISA) - 10b2 (yes, with a BNC
connector only) net card (ISA)
- Buslogic
On Sun, Mar 02, 2003, Voguemaster wrote about Re: Equipment:
Damn, I could use an ISA soundblaster... hehe
Couldn't find one anywhere!
So now all you need are three camels!
Then you could make the following series of crazy trades, paraphrasing on
various emails people sent here recently:
well ...
it just now hit me that i puted the wrong user name !!! (damn )
:(((
well, i'll try it tonight hope thats it
- Original Message -
From: Eli Segal [EMAIL PROTECTED]
To: Linux-IL [EMAIL PROTECTED]
Sent: Sunday, March 02, 2003 2:09 PM
Subject: Re: ADSL problems Please help
On 2003-03-02, Muli Ben-Yehuda wrote:
On Sat, Mar 01, 2003 at 11:02:33PM +0200, Beni Cherniavsky wrote:
OK. Then have a relative path to the top in every makefile and let
`make dist' in the top directory fix these pathes in all makefiles in
subdirs, before creating the archives.
No. As
Hi to all.
I realize that since Galeon depends on Mozilla, it's more likely that
people will want to convert/import from Mozilla to Galeon, rather than
the opposite. I use Galeon (1.27) predominantly, and have built up a
large bookmarks list which I'd like to import into Mozilla (1.21). I
saved
Hope someone can help
Model Maxtor 13 gig 93160U4
I am having problems transfering my file system from disk 1 (hdb) to
disk 2 (hdc). cp -a hangs under apparently random conditions. A look
at ps shows that cp in waiting_on_buffer and other processes such as
kupdated are also waiting for data.
Well ...
the bad news are that kobi from bezeqint tech support
no longer work there .. no more linux support :((
the good news are that i've installed finally my adsl
connection through new installation
and here are the details for future reference
keywords adsl pppoe debian
ip
Yesterday my linux hang so that I had to reset it, then fsck failed
and hang and then the partiotion table got broken :-(. It seems that
there is a physical problem with the drive, it's giving short read
errors. Couldn't find any better area to fail than around the boot
record of the second
41 matches
Mail list logo
