samba server / or poor hardware ?

Hi One of my computer - samba server (P166, 2 HD, Unknown motherboard, Scsi teac cdr55, btc cdrom20) got the following message and halt untill i reboot it :-( kernel: SysRq: unRaw saK Boot Off Sync Unmount showPc showTasks showMem loglevel0-8 tErm kIll killalL last message repeated 20 times

XF86Config help.

Hi, I’m trying to set my monitor to a 1024x768 resolution so at you can see from the XF86Config file bellow I commented everything that is related to either 640x480 or 800x600. Trying to run the X server I receive an error which states that there is no 1024x768 mode so the X server cant load.

Re: Defragmentation

Quoting Yedidya Bar-david [EMAIL PROTECTED]: Hi Iftach Hyams wrote: The defrag program can't run while the FS is mounted. Is there a way to boot with a diskette and apply it ? You can do it with the filesystem mounted read-only. In your boot prompt (lilo?) give a parameter '-b'

Fw: ginstall !? where can i get it ?

Hi , I am trying to compile isdn4-linux i get an error ginstall not found, tried looking through all rpm's and redhat site - no luck . anybody know where i can DL it or maybe even mailit to me ? thanks Moti [EMAIL PROTECTED]

Re: Fw: ginstall !? where can i get it ?

On Fri, 9 Jul 1999, Moti Levy wrote: ginstall = /usr/bin/install --Ariel Hi , I am trying to compile isdn4-linux i get an error ginstall not found, tried looking through all rpm's and redhat site - no luck . anybody know where i can DL it or maybe even mailit to me ? thanks Moti

Re: /tmp/xerrors

Geoff: I am in the US, so it is still not yet Shabbat (it is Friday morning here in NYC). I know I probably won't hear from you until Sunday. Out of all the good advice I have gotten from you all, I finally took yours, which was the simplest. I modified XF86Config in the following way: You

Re: /tmp/xerrors

Hi Jonathan Alexander Daniel wrote: [snip] 2) Oded Arbel suggested using XF86Setup to modify the XF86Config file. (BTW, Oded: I used "find / -name "filename" -print with "-print" because the first place that I learned about that command used that switch and I figured I needed to use that

Re: /tmp/xerrors

Yedidya: Thanks for the quick reply. 3) While we are at it, I thought I might ask about an old problem. I can use Shift-PageUp to scroll up. But once I go into either KDE or Gnome and exit back to the command prompt, I can't use this to scroll up beyond the point where I exited from

Re: /tmp/xerrors

Yedidya: glibc is preferable, especially if you run a glibc-ed distribution (like RedHat 6, Debian 2.1...). However, any of them should work, if you have the respective libc library (just ls -l /lib and see). You can put it manually in /usr/X11R6/bin, but you'd better get a package of your

Re: /tmp/xerrors

Yedidya: glibc is preferable, especially if you run a glibc-ed distribution (like RedHat 6, Debian 2.1...). However, any of them should work, if you have the respective libc library (just ls -l /lib and see). You can put it manually in /usr/X11R6/bin, but you'd better get a package of your

Re: samba server / or poor hardware ?

On Fri, 9 Jul 1999, Ben-Nes Michael wrote: :Hi : :One of my computer - samba server (P166, 2 HD, Unknown motherboard, Scsi :teac cdr55, btc cdrom20) :got the following message and halt untill i reboot it :-( : :kernel: SysRq: unRaw saK Boot Off Sync Unmount showPc showTasks showMem :loglevel0-8

Re: XF86Config help.

On Fri, 9 Jul 1999, Erez Hadas Boym wrote: :Hi, : :I’m trying to set my monitor to a 1024x768 resolution so at you can see :from the XF86Config file bellow I commented everything that is related :to either 640x480 or 800x600. : :Trying to run the X server I receive an error which states that