Does anyone know if there exists hebrew support for the unix version of
corel's Wordperfect 8?
And if so, how do i get it?
Thank you
[EMAIL PROTECTED]
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in
Is there any package for xemacs (mule) which enables right to left
editing?
I know there is no official support.
Thanx
[EMAIL PROTECTED]
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message
I am using a debian system which i think handles packages better then RH
and can also handle RH packages.
Concerning the window manager crashes.
Gnome is still not very stable, and RH probably still ships with version
0.3, there is version 1.somthing out now. Try getting s later version (It
was
It may be way of topic but it's a way to get to as many people as possible
with something that not enough people care about.
On 31 Aug 1999, Oleg Goldshmidt wrote:
With all due anguish regarding the plight of Afghan women, people who
are interested read soc.womens.rights or whatever is
Sorry, forgot
If you are interested check
www.debian.org
On Wed, 1 Sep 1999, Shlomo Reches wrote:
I know one thing that is good in Free BSD.
They have something much better than RPM.
When you want to upgrade a certain program
it automatically detects the depandencies and
get from the web
places, a thing that
can also cause trouble.
I usually prefer workaroud solution then using alian for these resons.
On Thu, 2 Sep 1999, Omer wrote:
On Thu, 2 Sep 1999, Micha Feigin wrote:
:Yes, the debian linux distribution has that ability.
:It automaticly checks dependency's, and downloads
On Thu, 2 Sep 1999, Yaron Zabary wrote:
On Thu, 2 Sep 1999, Stanislav Malyshev a.k.a Frodo wrote:
YZ I've been using FreeBSD for a couple of years now. IMO, its strong
YZ points (compared to Linux) are:
I'm a bit surprised how many myphologized is a mind of an average
advocate.
wrote:
On Sat, 4 Sep 1999, Micha Feigin wrote:
The fact that people upgrade because they can is their problem.If you
wan't stable you can always stick with the stable releases when they come
and not use the development ones (which from my experience are very stable
- and I have a bad
Try inserting it into .xsession if you want it only for the single user,
or as the first option in /etc/X11/ , I don't remeber the exact file but
it starts with wm... somthing. I hope Its the same because I use debian,
but in this respect the versions should be close enough.
You should also enter
I know there is a new office suite from sun which is free and about 60
megs download, havn't tried it yet though (don't have the disk space right
now) but my dad has it so I will probably be able to tell you in a few
days how it is.
I know it is available for several platforms (linux, windows and
Did you check in XF86Config that you are really pointing to your mouse.
Its probably using /dev/mouse, but its usually a symlink to someware else,
/dev/ttyS0 for exxample, and it may just be pointing to the wrong link,
because when you changed motherboard you may have chainged the port of
your
I ma using teh mule version of xemacs21. How do I read hebrew files with
it?
Also, I got the mule package, Is it also for xemacs21?, and where do I
install it, and what does it do?
Thanx
[EMAIL PROTECTED]
=
To unsubscribe, send
How do I reads hebrew files under xemacs21 (mule version)?
I tried to change language in the mule menu, but I still got rubbish
I tried to change the font, but apperently I didn't find the right font,
because it just defaulted back to courier, and i still got rubish.
I got the mule package from
I tried the patch given here some time ego to make hebrew usable under
netscape.
It fixed some of the problems (I think, I don't remeber if I could read
these pages or not)
At list it gives me iso8895-8 fonts and hebrew(hb) language pages.
I still have a problem reading some pages.
For example,
On Thu, 23 Sep 1999, Tzafrir Cohen wrote:
Its not neceseraly a SUID program, only if you mak eit so (maybe some
distributions do it by default?) I run it as a regular user. What you need
is to make shure the apropriate port is group: dip, /etc/ppp is grp dip
(for some reson it keeps changing in
Any program that can handle hebrew html under linux?
Also, what is the correct initial for hebrew, [he] or [hb] ?
[EMAIL PROTECTED]
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word "unsubscribe" in the message body,
I tried to use the bidirectional support specified under wc3 html
specification with communicator 4.61 for linux (dir="rtl"). It didn't do
anything. Is it a problem with the linux version, or communicator? (is it
implemented in any browser?)
(I don't have a windoze version to test)
I have a problem with kde using hebrew.
It won't show hebrew window titles (relevent especially in netscape).
I changed the fonts to hebrew fonts, but it does't solve the problem. When
I try to set the charset to any instead of iso-8859-1, it keeps returning to
iso-8859-1.
Also, under netscape,
If you can, send the /etc/lilo.conf file so we can see what linuxconf
tried to do.
On Thu, 7 Oct 1999, Dan "BUTTER" wrote:
hi there!
i have tried to change (using linuxconf) the default boot system ,that lilo boots
from the linux to msdos.
since then the system cannot boot on msdos ,when i
Can anyone point me to some nice hebrew fonts that i can use under
xemacs21?
How do i load a font in xemacs21 from .emacs?
I am also looking for a fixed hebrew font that i can use on other editors
(I am looking for something for kwrite now).
Fixed loads the english one by default, and on most
I get n error with several programs under linux (mostly xemacs21
recently) sayying that it can't convert string to type fontstruct. for
example:
Warning: Cannot convert string "-ttf-web hebrew
monospace-medium-r-normal-regular-*-160-75-75-m-*-iso8859-1" to type
FontStruct
Warning: Cannot convert
On 10 Oct 1999, David Coe wrote:
Micha Feigin [EMAIL PROTECTED] writes:
I get n error with several programs under linux (mostly xemacs21
recently) sayying that it can't convert string to type fontstruct. for
example:
Warning: Cannot convert string "-ttf-web hebrew
monospace-m
i am planning on buying a new computer soon, which is supposed to run
mainly on linux (Debian). The problem is, no sales person seems to know
what hardware is windows dependent and what not.
As far as i know the main problem is with modems and video cards.
How can i recognise one that will work
Where are these aplications?
Looked for caitoo (is it k instead of c ?) on the kde ftp server and
cou;dn't find it.
On Sun, 17 Oct 1999, Isaac Aaron wrote:
If you're looking for GUI utilities, I can recommend two:
caitoo - for the KDE environment.
and "X Download Manager" AKA 'nt' - for the
How do I print from netscape hebrew web pages (I tried to print to file
and it came out jiberish, even though I saw it ok on screen).
i know I have hebrew fonts suitable for ps because latex gives me hebrew
ps.
Thanx
[EMAIL PROTECTED]
that.
Thanx
[EMAIL PROTECTED]
On Sun, 17 Oct 1999, Gaal Yahas wrote:
On Sun, Oct 17, 1999 at 05:43:29PM +0200, Micha Feigin wrote:
I am looking for hebrew fonts that xemacs will recognise. It won't show
globes, the web fonts, bible, david or hebrew fixed font. Are there
suitable fonts out
Well, aperently, I have the needed fonts installed, Its just that xemacs
wont use them. I tried xemacs -fn heb10x20 but for some reson it just
ignored the font request.
On Sun, 17 Oct 1999, Stanislav Malyshev a.k.a Frodo wrote:
GY Whoops, didn't notice that in the original post - sorry, I
Try from the win95 partition, from the dos command line, either
fdisk /mbr
or
fdisk \mbr
I don't remember which way the slash goes, but one of them will just do
nothing so don't worry, the other should work it will put back the
original dos mbr in place.
On Mon, 18 Oct 1999 [EMAIL PROTECTED]
I got xemacs21 -fn heb10x20 (took some fidling with fonts.alias and
fonts.dir) but I still can't see hebrew text.
I tried under the mule menu to set language environment and to set the
coding system for the buffer, but it didn't work.
I tried the option show character table for iso-8895-8 and I
Haven't tried it, so i don't know if it will work, but try to add to the
option beside default the option user, if that doesn't work you can also
try to add noauto, and then mount the partition as the user.
Tell me if it works, I was interested in it but didn't have time to check
it yet.
[EMAIL
As far as I know kernel 2.2.12 isn't ery stable. Try to downgrade to
kernel 2.2.10 and see if that soles your problem
On Wed, 20 Oct 1999, Nir Simionovich (Rin Solo) wrote:
Hi All,
Here is a baffeling problem. I have a RH6 machine, kernel 2.2.12 that
works with IP aliasing. The eth0 NIC
I was wondering where can I get a copy of mule (emacs mule), and how is
its functionality.
i am now using xemacs21. How do they compare?
Also, does it work with the major packges for emacs/xemacs (auctex,
x-symbol, outline-mode, html etc.)?
Thanx
[EMAIL PROTECTED]
On Sat, 30 Oct 1999, Shaul Karl wrote:
I was wondering where can I get a copy of mule (emacs mule)
I believe you are aware to the xemacs20-mule deb.
It seems that there is some dissatisfaction among debian developer from the
state of the deb for xemacs21 so the package maintainer might
You also need to change your keyboard to input hebrew charachters.
beside that, look, i think its in the view menu, for the charachter set
option, and set it to hebrew, it will then also show you hebrew chars. It
doesn't know to change the keyboard input, you need to use either xkb (i
think its
Thats a BIG problem in linux.
There is the mule program (emacs version, not xemacs) which is supposed to
have rtl support. Never tried it though, so can't help there.
There is a hebrew.el file for xemacs (I think its in ftp.huji.ac.il/pub/ I
think its in a directory hebrew or emacs or something
the program is xmodmap, but you need an hebrew key map, i am sorry, but I
don't have one to send you because i use kde's international keyboard
On Sat, 30 Oct 1999, Dorit Ben-Shalom wrote:
E.g. something that connects the font to my keyboard :)
Dorit
i didn't get many answears to this, but solved it in the end, so if anyone
is interested, the problem is that xemacs only recognises iso-8859-1 fonts
(or at list wont recgnise iso-8859-8), and another problem is that it will
default to the english version if exists. So the solution is to make new
I don't know how to tell netscape that the page is in hebrew (anyone?) i
tried defining charsets, but for some reson it wont work, probably doing
it wrong.
A solution though is when you load a hebrew page to go into the menu
view-charset and chose the hebrew charset. that way you can force the
When I change the charset manually it doesn't change this, only the rest
of the page, I think that the solution to seeing the page in hebrew is to
chage charset automaticly, although thats the pages job, I don't knoe if
there is anything you can do about a page that doesn't define its charset
I think that it means that you don't have a font file that is connected to
that name, look either in fonts.dir ot fonts.alias if it appears,
otherwise look there for some other font that is apropriate and write its
name instead.
On Wed, 3 Nov 1999, Dorit Ben-Shalom wrote:
Hi there
I am
i was wondering, before i spend several hours downloading and cinfiguring
wine, whether it can run hebrew versions of windows programs?
i tried it at the time with win 3.11 (I currently, hopefully not long run
a 486) and got a message that it was the wrong version of windows.
Also, does anyone
I know that staroffice doesn't support hebrew yet, but does anyone know if
it will load english documents writen with the hebrew version of word?
(I don't have word so I can't check it myself)
thanx
[EMAIL PROTECTED]
=
To
On Tue, 9 Nov 1999, Eran Man wrote:
Micha Feigin wrote:
i was wondering, before i spend several hours downloading and cinfiguring
wine, whether it can run hebrew versions of windows programs?
i tried it at the time with win 3.11 (I currently, hopefully not long run
a 486) and got
Check out the latex2html package (you probably need to find the right name
for your distro).
I have not tried it so I don't know if it suits your requirments, but it
might.
Will also give you the advantage that you can print the output using latex
if you whish later.
You can also try to check
I got a linked for this script on this list (I don't remember to where, i
think in the technion).
It works ok gor most aplications, exept for one little problem. i managed
to get it to recognise space as an hebrew letter for reversing the text
back, but i couldn't get it to recognise the period,
I haven't checked it myself, but I asked the question not long ago, and
was told that staroffice can load word97 documents (also if they where
writen in hebrew version of word, as long as they where completely english
documents, and I didn't understand if you needed to also use the english
Try to check if you something in the background, someone on his lis had h
same rouble some time ago and apperently he had 50 copies of one of the
demons running in the background fo some reson, once he killed them
every thing ran fine.
try I think ps -aux or top
On Tue, 23 Nov 1999 [EMAIL
I have one pop account and another acount which I have telnet/ftp access
to that i have mail accounts on. I want to download the mail automaticlly
each time on conection, How do i do this?
For the telnet/ftp account I don't know if I can connect via pop or imap.
I tried pop to names that could be
On Wed, 24 Nov 1999, Ralph S. Birnbaum wrote:
Yedidya Bar-david writes:
2. catdoc reads .doc and outputs text only. Sometimes this is the
fastest option, if you don't need the formatting...
at http://mac-www.fe.msk.ru/~vitus/catdoc/
If all you need is the text sans formatting,
I just had somewhat of the same problem.
What solved it is to put the partition containing the kernel on a primery
partition (won't work from logical partition for me, gave me problems
defining it as the bootable partition).
i then needed to define it as the bootable partition, install lilo on it
You need to set the permisions on your modem port to let the user use it
(probably add the user to group dialout)
you also need to set permisions one /etc/ppp if you want access the log
file.
On Sat, 27 Nov 1999, root wrote:
I tried to make KPPP work without entering the root password when
How do I convert latex2e to work with hebrew (mainll the support for
hebrew under babel).
do I need to get elatex?
Can anyone point me to a sight containing the information?
thanx
[EMAIL PROTECTED]
=
To unsubscribe, send mail to
I don't know about zip or printer, but to stop a print job try lprm
Also check out isapnp and pnpdump concernng seting up pnp hardware (have't
looked into it yet, although i need to for my modem) but its supposed to
enable you to work with pnp devices. (you need to compile the kernel with
pnp
I just installed mule on my system (the debian package) and aperently the
info file on r2l editting is missing, so I was wondering if anyone can
tell me where do I start on using hebrew under mule, either pointers,
where to start looking for info, or a tutorial (i use xemacs-mule so
far but its
How do I use 16 bit collor on a mach64 (ATI AGP rage pro turbo) server?
i managed to get the resolution up to 1600x1200 but it still uses 8 bit
color. Any way to change it?
How do I know how many colors the display uses btw?
Thanx
[EMAIL PROTECTED]
On Tue, 14 Dec 1999, Boaz Rymland wrote:
Hello ppl,
1. Does anyone knows whether the stream classes stringstream (defined
under the ANSI C++, ofcourse... :-) are implemented under Linux latest
C++ development bundle (whatever progs and libs it includes inside) ?
GNU g++ implements it,
whenever I go into linux, my bios clock starts to run faster
When working under windows I don't get that problem
I cught a message once when i shut down the system that said that linux was
updating the clock.
Any idea's how to solve this?
Is it posible already to write hebrew under gnome?
( I don't care which direction at the moment, just switching the keyboard
language)
thanks
[EMAIL PROTECTED]
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word
I was wondering which distro is most recomanded for someone who wants to
learn linux in order to posibly work on it in Israel ( I am aware that
which distro is best is kind of a religious war, but the question is more,
which distro is most common on public systems in israel)
It looks like its
Hi
I am looking for anyone in the tel aviv area that is willing to burn me a
copy of the red hat cd (whatever version is recomanded for a new user on a
home pc)
Its for a friend of mine who is looking to get into linux.
I can either pay for the cd or bring one in advance.
I am looking for someone
I just installed red-het 6.1 on a friends machine.
It installed with gdm, kdm and xdm, but none of them starts up
automaticly. I tried to remove xdm, but rpm doesn't recognise neither kdm
or gdm as a package, so I can't remove them as a package. They also don't
appear as a package on the disk.
I
I am looking for a version of mule which supports hebrew (and rtl)\
I am using debian, so a deb package would be preferable.
i tried to download the deb version but it said that rtl isn't supported
yet.
Am I missing a file?
I tried to follow the link to cs.huji.ac.il but the ftp won't connect, is
I there a way to remove the password length limitation that is installed on
default with the red hat 7 instellation?
I know that there is some posibility of doing this, because my debian
instelation enables using empty passwords.
Thank you
Micha Feigin
[EMAIL PROTECTED
partition without lilo either (the computer
just froze on startup).
The installation did boot ok from the boot disk.
Is there any way to solve this in order to use lilo instead of using loadlin
instead?
Thank you.
Micha Feigin
[EMAIL PROTECTED
I just installed red-hat 7.0, and I seem to have trouble conecting to the
internet.
After some work I managed to get the modem working by installing kernel
2.4.2 (isapnp on kernel 2.2.something didn't seem to work, although it
did before on a debian system.)
Trying to use the redhat ppp
partition without lilo either (the
computer
just froze on startup).
The installation did boot ok from the boot disk.
Is there any way to solve this in order to use lilo instead of using
loadlin
instead?
Thank you.
Micha Feigin
[EMAIL PROTECTED
My system won't conect to the isp provider. I managed to get it to dial,
but I get a mesage (even when trying to run pppd directly) that the kernel
wan't compiled with ppp support. I tried to compile both 2.4.2 and 2.4.4
with ppp suport but it didn't seem to help. I compiled it in, not as a
How do I create a hebrew keyboard for X/console? There is the default keymap
for the console which I need to make some changes to. I managed to load a
keymap using kbdconfig, but it messed up some of the old keys.
Also, how do I make it load automaticaly?
Thanx
Micha Feigin
[EMAIL PROTECTED
no longer uses the x
font server by default and one of the options is unix:-1 or something like
that (the unix and -1 are there I don't remember the syntax exactly).
How do I make the fonts load automaticaly?
Micha Feigin
[EMAIL PROTECTED
I saw under the menus in nautilus the burn cd option, which gives me the
answear that burn:/// is an invalid location.
I also tried to install the nautilus-netmd extention for the sony net MD
which is supposed to give access through nautilus through the url
netmd:///, but I get the same responce.
When I try to configure kernel 2.5.69 using make xconfig under debian
unstable I get the error message:
*
* Unable to find the QT installation. Please make sure that the
* QT development package is correctly installed and the QTDIR
* environment variable is set to the correct location.
*
Anyone
I tried installing netenv on my machine.
It gives the startup choosing screen and everything, but afterwards
doesn't seem to do anything with the data.
The network values I get are those set in the interfaces file.
I tried disabling the interfaces file, but that did no good.
I looked through the
Somewhere in 2.5 there are two graphical configurations I am aware of.
There is make xconfig which brings up a qt interface and a make gconfig
which brings up a gtk interface.
Don't know if there is anything other graphic.
I know that make menuconfig still exists.
As an extra for my last
How do I get xterm to show hebrew file names ?
I set the font properly, but I get the files appearing as a bunch of
question marks (_??.html)
When I press the tab for autocomplete though the filenames do apear
properly, but I can't do anything with those files.
When connecting through ftp
I don't seem to be able to start any external procols in either galeon
or nautilus.
For example trying
toc:man
I get:
toc is not a registered protocol.
Same in nautilus for the netmd:/// or burn:///
I am using debian unstable with galeon 1.3.5 and nautilus 2.2.4
any ideas?
[EMAIL PROTECTED]
Micha Feigin wrote on 2003-06-30:
How do I get xterm to show hebrew file names ?
First, what does ``locale`` show you? And what's the encoding of the
file names.
locale returns:
LANG=C
LC_CTYPE=C
LC_NUMERIC=C
LC_TIME=C
LC_COLLATE=C
LC_MONETARY=C
LC_MESSAGES=C
LC_PAPER=C
LC_NAME=C
don't know about kword, but something that solved the problem for me
under mozilla was a package called xprint (xprt-xprintorg under debian).
Look in xprint.org
It is supposed to run over the regular printing system (it also need
some kind of lpr underneath) but it is designed to enable printing
It seems to me that my computer is using way too much memory then it is
supposed to. According to /proc/meminfo it seems to be using over 200M
with only gnome-multi-terminal and lyx with no documents running. Is
this normal?
I used to run linux on a 64M computer so something seems strange to me
A am running an acpi enabled kernel and the only events I manage to get
from the acpid daemon are the lid and powerbutton events.
The main one that interests me is ac event which isn't sent.
I looked in the kernel source and it seems that it is supposed to be
sent.
I try catching all events with
On that same note, Why do gnome applets take so much memory.
I tried loading acpi-docklet, it took a meg of mem to show a small
pixmap and ocasionaly check /proc/acpi (actually ps showed 12 megs but
insering and removing it only showed a difference of 1 meg using free),
and batstat or something
Don't know at what level the event is initiated, but acpi does know
whether the ac adapter is connected or not.
cat /proc/acpi/ac_adapter/ACAD/state
state: on-line
it also knows off-line
On Wed, 2003-07-09 at 21:19, Maxim K. wrote:
On 9 Jul 2003, Micha Feigin wrote
I am trying to connect from home to a computer inside tau.
This requires first connecting to a gateway computer using ssh and from
there to login again to another computer using ssh.
Is it possible to tunnel an ftp and/or an X (such as xterm) connection
over this double connection (haven't managed
I try to connect to a remote computer using ssh and then tunnel the ftp
connection back to by computer using
ssh -R 1234:local machine:21 ...
I manage to open an ftp connection back to my computer and log in, but I
can't seem to be able to do anything with it:
michf ftp localhost 1234
Connected
On Thu, 2003-07-17 at 10:08, Shachar Shemesh wrote:
Alon Altman wrote:
On Thu, 17 Jul 2003, Micha Feigin wrote:
I try to connect to a remote computer using ssh and then tunnel the ftp
connection back to by computer using
ssh -R 1234:local machine:21 ...
I manage to open an ftp
On Thu, 2003-07-17 at 10:55, Shachar Shemesh wrote:
Tzafrir Cohen wrote:
On Thu, Jul 17, 2003 at 09:07:18AM +0300, guy keren wrote:
On 17 Jul 2003, Micha Feigin wrote:
I try to connect to a remote computer using ssh and then tunnel the ftp
connection back to by computer
On Fri, 2003-07-18 at 13:29, Shaul Karl wrote:
On Fri, Jul 18, 2003 at 01:39:10AM +0300, Micha Feigin wrote:
I am aware of sftp, only for the specific computer I am trying to
connect to, when I try to connect over sftp the connection locks up.
I can't connect directly back to my computer
How do I use iso-8859-9 as the default font without forcing the message
translation when using locales?
I tried reconfiguring locales to use he_IL.iso8859-8 but that changed
all my menus and messages on the locale aware programs to hebrew, which
I don't want.
I am using debian unstable if it
On Fri, 2003-08-08 at 10:15, Shlomi Fish wrote:
On Fri, 8 Aug 2003, Shaul Karl wrote:
What is hyper-threading and FSB from the
`P4 2.4 ghtz hyper-threading 800 mhz FSB'?
Hyper Threading is an Intel technology that enables one processor to
perform two operations at once in a similar
I just upgraded my system to xfree86 4.3
Under 4.2 when I configure the keyboard to il and group switch to the
two shift keys together, when pressing the two shift keys I would get an
hebrew keyboard and the scroll lock led would light up.
Under 4.3 I the scroll lock led still lights up the same
On Sat, 2003-08-30 at 12:43, Oded Arbel wrote:
On Saturday 30 August 2003 10:02, John Rabkin wrote:
Aaaah yes. The age old argument. I cannot understand for the life of me why
some people are on a crusade to bog Linux down with eye-candy. A flashy
interface is a sure sign of a weak
it under sawfish, and when activated you see the desktop scale
down and then all desktops in 3d in a circle and you can spin then
around to pick the one you want. (This can probably be changed to work
with windows instead of desktops if X has the ability provide an image
of each window).
--
Micha
page=8859-8 but it wouldn't mount. I
tried 862 and utf8 code pages which did mount, but didn't affect the
gibberish at all.
--
Micha Feigin
[EMAIL PROTECTED]
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe
debian unstable and OOo 1.1-rc3 if it helps.
Thanx
--
Micha Feigin
[EMAIL PROTECTED]
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail
://www.debian.org/CD/http-ftp/#stable
and I don't know which files I should get.
Should I get the i386 files or the source files or both?
(I need it for an IBM ThinkPad T40).
Thanks.
--
Micha Feigin
[EMAIL PROTECTED
, but they upgraded the site and so it
doesn't work for me anymore.
I'm using firebird 0.6.1
Thanx,
Ittay
--
Micha Feigin
[EMAIL PROTECTED]
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe
Hello,
I occasionally get hebrew emails in evolution. I can see the text ok,
and each word is shown in the right direction, but the sentence
direction is left to right instead if right to left.
Any ideas if its possible to fix this behviour?
--
Micha Feigin
[EMAIL PROTECTED
PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
--
Micha Feigin
[EMAIL PROTECTED]
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
--
Micha Feigin
[EMAIL PROTECTED]
=
To unsubscribe, send mail
, e.g., run the command
echo unsubscribe | mail [EMAIL PROTECTED]
--
Micha Feigin
[EMAIL PROTECTED]
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run the command
echo
won't see a distro having an out of the box
installation with 2.6 until it goes stable.
--
Micha Feigin
[EMAIL PROTECTED]
=
To unsubscribe, send mail to [EMAIL PROTECTED] with
the word unsubscribe in the message body, e.g., run
1 - 100 of 417 matches
Mail list logo