An old thread, but important to get these fundamental performance
numbers up there:
2.4.2 on an 800mhz PIII Sceptre laptop w/ 512MB ram:
elapsed time for 10 pingpongs is
3.81327
10/3.81256
~26229.09541095746689888159
1/.379912
Hi,
seems like my first try with the complete patch hasn't made it through
to the mailing list. This is the second try with only the common part of
the patch. Here we go (again):
---
I have a suggestion that might seem unusual at first but it is important
for Linux on S/390. We are facing the
On Mon, 9 Apr 2001, gis88530 wrote:
Thanks a lot.
Do you know the purpose of csum_partial( ) function?
I can't find out it source code.
Sure. It does a partial checksum of various IP fragments when they
are being assembled. By starting with 0 as the input parameter,
and the entire length
--- 2.4.4-pre1/arch/sparc/mm/generic.c Sat Apr 7 08:15:16 2001
+++ linux/arch/sparc/mm/generic.c Mon Apr 9 16:48:42 2001
@@ -21,7 +21,7 @@
struct page *ptpage = pte_page(page);
if ((!VALID_PAGE(ptpage)) || PageReserved(ptpage))
See attached oops description.
--
W. Wade, Hampton [EMAIL PROTECTED]
BUG report for vmguest5 on Mon Apr 9 07:00:32 EDT 2001
[1.] One line summary of the problem:
Kernel oops with 2.4.3+LIDS running under VMWare
[2.] Full description of the problem/report:
The machine that crashed is a
I made a simple bug_report.sh script to facilitate
generating a bug report. It could be included in
/usr/src/linux/scripts and could be referenced in
/usr/src/linux/BUG-REPORTING.
If anyone is interested, please see attached.
Cheers,
--
W. Wade, Hampton [EMAIL PROTECTED]
bug_report.sh
hello all,
For the past week, i am having problems with (possibly BUGGY) memory
allocation by the kernel in my NAT-PT module. I posted this to netdev before
but did not get any response. So, here i am with some more proof:)
In my IPV6-IPV4 translator module, i capture an IPV4 packet by
Jeff Garzik said:
[snip conversation about NETDEV WATCHDOG errors on ADMTek Comet tulip clone
card]
Ok, this should be fixed in the latest patches sent to Alan and Linus.
Testing with 2.4.3-ac3 and so far, so good. Thanks!
--
Manuel A. McLure - Unify Corp. Technical Support [EMAIL PROTECTED]
Greetings,
Is anyone having problems with running more than
1 VM on 2.4.3. I have crashed my host O/S several
times when I try to start two VMs. Currently,
I don't have an oops or other info to report, but
I did see a post on the vmware list about 2.4.3 SMP
and VMWARE.
Host:
dual PIII/800,
Hi!
This allows me to use some (old and broken) AT/LANTIC boards.
MfG, JBG
--
Fehler eingestehen, Gre zeigen: Nehmt die Rechtschreibreform zurck!!!
/* Jan-Benedict Glaw [EMAIL PROTECTED] -- +49-172-7608481 */
keyID=0x8399E1BB fingerprint=250D 3BCF 7127 0D8C A444 A961 1DBD 5E75 8399 E1BB
Hi,
I've got a dual CPU (Pentium-Pro), Adaptec 7880 SCSI adapter
machine with two 100Mbps ethernet cards (Linksys / Tulip), and a 16/4
Token-ring card (IBM Olympic chipset) in it. The kernel configuration is
attached in this email.
I installed Debian 2.2r2 and upgraded the
On 9 Apr 01 at 12:03, Wade Hampton wrote:
Is anyone having problems with running more than
1 VM on 2.4.3. I have crashed my host O/S several
times when I try to start two VMs. Currently,
I don't have an oops or other info to report, but
I did see a post on the vmware list about 2.4.3 SMP
From:Jonathan Hudson [EMAIL PROTECTED]
X-Newsreader: knews 1.0b.1
x-no-productlinks: yes
X-Newsgroups: fa.linux.kernel
Content-Type: text/plain; charset=iso-8859-1
Date:Sat, 07 Apr 2001 21:01:56 GMT
Bytes: 235
Sender: [EMAIL PROTECTED]
Precedence: bulk
From: Jan-Benedict Glaw ([EMAIL PROTECTED])
Date: Mon Apr 09 2001 - 12:07:16 EDT
This allows me to use some (old and broken) AT/LANTIC boards.
Please re-test this patch.
Boards based on DP83905 AT/LANTIC chip should never need to be added to
the bad clone list. The bad clone list should
Petr Vandrovec wrote:
On 9 Apr 01 at 12:03, Wade Hampton wrote:
Is anyone having problems with running more than
As I already answered on VMware newsgroups:
Thanks. I didn't see the post on the VMware newsgroup
VMware's 2.0.3 vmmon module uses save_flags() + cli()
in poll() fops,
[EMAIL PROTECTED] said:
I have a suggestion that might seem unusual at first but it is
important for Linux on S/390. We are facing the problem that we want
to start many ( 1000) Linux images on a big S/390 machine. Every
image has its own 100 HZ timer on every processor the images uses
On Mon, Apr 09, 2001 at 05:26:27PM +0200, Manfred Spraul wrote:
The return path to user space checks for pending softirqs. A delay of
And it breaks the loop too if new softirq events become pending again in
background.
1/HZ is only possible if the cpu loops in kernel space without returning
After patching from 2.4.3 to 2.4.4-pre1 my reiserfs volumes failed to mount.
I checked that reiserfs was included and tried to load the module manualy. This gave
this result:
lib/modules/2.4.4-pre1/kernel/fs/reiserfs/reiserfs.o: unresolved symbol strstr
I went in to my .config and disabled 640 and 640 enhanced in favor of
trying the 64x ide support. I especially liked the fact that from the
code it look to have a /proc table similar the the via driver for my
onboard controller. Then during compile I can not get the 64x to
correctly build
"Eloy A. Paris" wrote:
Hi guys,
I have seen several messages posted to l-k about people reporting
processes (mozilla most of the time) hanging in the D state in 2.4.3,
but I haven't seen someone posting a possible explanation or solution
to the problem.
It's due to problems in the
Hello!
Btw, you don't schedule the ksoftirqd thread if do_softirq() returns
from the 'if(in_interrupt())' check.
ksoftirqd will not be switched to before the first schedule
or ret form syscall, when softirqs will be processed in any case.
So, wake up in this case would be mistake.
I assume
All,
Here is a patch I have put together (with much assistance from Jens Axboe)
that permits ps2esdi machines to boot again. It is against 2.4.3. In
case my mailer mangles it, it is also available at the following URL.
http://www.sound.net/~hald/projects/ps2esdi/ps2esdi-2.4.3.patch0
Or you can do as I have and setup port 26 SMTP, thereby routing around
nazi ISP created damage. Believe me, the damage that RBL, ORBS, etc can
do is incredible. I still use them, but I use them carefully and I
provide escape routes for people who are still under a global
[EMAIL PROTECTED] wrote:
Joseph Carter [EMAIL PROTECTED] wrote:
Let's see, ORBS takes out the ISP route, DUL takes out the direct one. Is
it any wonder people are hostile toward those two lists?
Exactly. I hate spam, but I hate ORBS and DUL even more. If I'm going to get
the shaft,
On Mon, Apr 09, 2001 at 09:48:02PM +0400, [EMAIL PROTECTED] wrote:
Hello!
Btw, you don't schedule the ksoftirqd thread if do_softirq() returns
from the 'if(in_interrupt())' check.
ksoftirqd will not be switched to before the first schedule
or ret form syscall, when softirqs will be
this is one of linux biggest weaknesses. the fixed interval timer is a
throwback. it should be replaced with a variable interval timer with interrupts
on demand for any system with a cpu sane/modern enough to have an on-chip
interrupting decrementer. (i.e just about any modern chip)
On Mon,
Daniel, you write:
For the past several weeks I have been developing a directory index
facility for Ext2, with good results so far. This note describes the
on-disk format of the new index.
Finally starting to test your last release, and you make a new one... ;-)
Needless to say, the new
As multitech seems not to provide a driver for 2.4, someone must have
ported the 2.2 driver to 2.4. I'd like to talk to this person, and help
merging the 2.2 updates to 2.4.
I did a quick port of the old driver over (it wasnt very hard) and people then
added additional bits of support later.
depmod: *** Unresolved symbols in
/lib/modules/2.4.4-pre1/kernel/drivers/ide/ide-cd.o
depmod: strstr
depmod: *** Unresolved symbols in
/lib/modules/2.4.4-pre1/kernel/drivers/parport/parport.o
depmod: strstr
That'll be from my patches. Now I am back
All,
OK, Helge is of course correct here. I will get a new patch out tonight.
Basically, the ending = -1; needs to be preceded by an else.
(I think so anyway, as I don't have access to that machine right now.)
Hal Duston
[EMAIL PROTECTED]
On Mon, 9 Apr 2001, Helge Deller wrote:
Hi Hal,
I really would like to run "ORBS" on my incoming-mail-server. However
I find it unacceptable to be rejecting Email from possibly legitimate
clients. So Adding an "relay is listed on orbs" line would allow me to
sort this into a low priority "probably spam" mailbox, just like I'd
do with
"Stephen D. Williams" [EMAIL PROTECTED] writes:
An old thread, but important to get these fundamental performance
numbers up there:
2.4.2 on an 800mhz PIII Sceptre laptop w/ 512MB ram:
elapsed time for 10 pingpongs is
3.81327
10/3.81256
advantageous to enable zero copy IO than copy_from_user() and copy_to_user
() all the data. Other OS such as AIX and OS2 have kernel functions that
can be used to accomplish such a task. Has any ground work been done in
Linux 2.4 to enable "zero copying IO"?
kiovecs support this. Note that
Uh... use their ISP relay service anyway???
I take my laptop all over, to lot's of my clients locations, and if I
could relay through their servers, then I had better give them some good
advice.. Some places I just pick an available IP and it might not be in
the allowed relay list. And this
On Mon, Apr 09, 2001 at 07:58:23PM +0100, Alan Cox wrote:
depmod: *** Unresolved symbols in
/lib/modules/2.4.4-pre1/kernel/drivers/ide/ide-cd.o
depmod: strstr
depmod: *** Unresolved symbols in
/lib/modules/2.4.4-pre1/kernel/drivers/parport/parport.o
depmod:
The other exception is untestable-netblocks.orbs.org, which blocks
everything it cannot test and is just as bad as DUL.
untestable-netblocks is the killer for 20% of the actual spam I get (almost
entirely from rr.com)
Anyway, since linux-kernel has chosen to not receive email from me
I
I've got a trio of identical PIII machines all failing with aic7xxx under
2.4.3. I've tried both aic7xxx 6.1.9 and 6.1.10 in addition to the one
in 2.4.3 (6.1.5?). These machines work fine under 2.2.18pre21.
I'm looking for any ideas or suggestions on how to fix this.
(Ok, honestly I'm hoping
Hi,
I am new to this list. I did go through the FAQ before posting this
question. I have a specific requirment - creating,modifying and deleting
data structures inside the kernel values of which will be passed by an
user application. I know we could do this by writing a system call or by
ioctl
Alan Cox wrote:
As multitech seems not to provide a driver for 2.4, someone must have
ported the 2.2 driver to 2.4. I'd like to talk to this person, and help
merging the 2.2 updates to 2.4.
I did a quick port of the old driver over (it wasnt very hard) and people then
added additional
Srinivasan Venkatraman wrote:
I am new to this list. I did go through the FAQ before posting this
question. I have a specific requirment - creating,modifying and deleting
data structures inside the kernel values of which will be passed by an
user application. I know we could do this by
Thanks for the inputs.. But, if we cannot move back to 2.2.19
and need to stick with 2.4.0 for our own reasons concerning the
work underway, would it be possible to give us a pointer us to
the list of issues related to this problem in the vm, so that we
may attempt to try and get some
I have seen several messages posted to l-k about people reporting
processes (mozilla most of the time) hanging in the D state in 2.4.3,
but I haven't seen someone posting a possible explanation or solution
to the problem.
Anyone knows where does the problem lie, or a workaround for the
Hi !
I'm installing a CD burner and I've setup the ide-scsi, while checking
the setup, I got the following messages.
What does this means, please ?
System is :
---
Linux debian-f5ibh 2.2.19 #1 lun avr 9 18:33:18 CEST 2001 i586 unknown
Gnu C 2.95.2
Gnu make
this is one of linux biggest weaknesses. the fixed interval timer is a
throwback. it should be replaced with a variable interval timer with interrupts
on demand for any system with a cpu sane/modern enough to have an on-chip
interrupting decrementer. (i.e just about any modern chip)
Its
A typical startup with 6.1.9 proceeds like this... (6.1.10 hangs silently
after emitting the scsi0 and scsi1 adapter summaries, maybe it is
going through the same gyrations silently.)
Try saying N to the AIC7xxx driver and Y to AIC7XXX_OLD and see if that works.
This is important both
I did a quick port of the old driver over (it wasnt very hard) and people then
added additional bits of support later.
multitech never sent me many updates
O well. I thought it went this way
Do you have sort of a 'patch' from your port? I could take this as a
guideline for
Alan Cox wrote:
I really would like to run "ORBS" on my incoming-mail-server. However
I find it unacceptable to be rejecting Email from possibly legitimate
clients. So Adding an "relay is listed on orbs" line would allow me to
sort this into a low priority "probably spam" mailbox, just
Originally to: All
I am sorry if this is old news but I have not seen any mention of it in the
list.
I keep getting "kernel: Sound error: Couldn't allocate DMA buffer" in my
syslog. However sound was working until this morning. The machine uptime is
below :)
The PC is a IBM PS/2 486DX2, with
Hi!
1. The best case: an init function calls a non-init, which in
turn calls an init:
void __init probe() { a(); }
void a() { b(); }
void __init b() { ... }
in this case, is the missing __init on 'a' only a performance
A typical startup with 6.1.9 proceeds like this... (6.1.10 hangs silently
after emitting the scsi0 and scsi1 adapter summaries, maybe it is
going through the same gyrations silently.)
Alan Cox directs...
Try saying N to the AIC7xxx driver and Y to AIC7XXX_OLD and see if that works.
On Mon, 09 Apr 2001, Alan Cox wrote:
this is one of linux biggest weaknesses. the fixed interval timer is a
throwback. it should be replaced with a variable interval timer with interrupts
on demand for any system with a cpu sane/modern enough to have an on-chip
interrupting decrementer.
I confirm similar problems (see my message from yesterday).
AIC7XXX_OLD also failed for me. I have tried aic 6.1.8 as well
as 6.1.10.
Both 2.4.0 under redhat 7.0 and 2.4.1 as shipped by redhat
wolverine work. As have all earlier versions going back to 2.3.xx
and 2.2.x
On Mon, Apr 09, 2001
I can add a "me too" to this thread.
I began playing with 2.4 releases (again) at 2.4.2-ac23 and i can't
manage to boot it properly, even the 2.4.3-ac2. I have an adaptec 2940U
(aic7860 as driver tells me) and both drivers, old and new, dont work
properly. Either i get
As always, the latest version of this driver is availalbe here:
http://people.FreeBSD.org/~gibbs/linux/
This site now includes installation instructions, feature set,
etc. The page is under construction - comments welcome.
For the impatient:
CHANGELOG:
Apr 7 19:56:13 snap kernel: Vendor: SEAGATE Model: ST318275LWRev:
0001
I seem to recall this being a very buggy firmware version. You should
check with Seagate to see if they have something new. If this is the
firmware I'm thinking of, the driver should perform correctly if you
On Fri, Mar 30, 2001 at 08:32:39AM -0800, [EMAIL PROTECTED] wrote:
On Fri, Mar 30, 2001 at 02:32:24PM +0200, Frank de Lange wrote:
Subject says it all: 2.4.3 (unpatchaed) is still causing the dreaded
APIC-related hangs on SMP BX systems (Abit BP-6, maybe Gigabyte). I still need
to apply
Looks like an IRQ problem to me.
I mean the kernel wants to change IRQ routing and just do the wrong job.
Ingo reported me a similar problem a couple of week ago that made failed
the sym53c8xx driver. Looks very similar to this one with the kernel PCI
code wanting to assign IRQ 11 to almost
Hi all,
I write a sample code(user mode) to test the serial
driver.
I can open COM1 and write string to COM1.
But, when I want to read data from COM1, the program will
block at read function.
I trace the driver source code.
1.
When the program execute write operation, it will call
The Config help for kernel automount indicates that the pointer to user
code is in the Documentation/Changes file for autofs. As far as I can tell
that isn't the case. Since search engines seem to be better at finding the
BSD and 2.2 software, it would be nice if the information was restored
with
On Mon, Apr 09, 2001 at 02:50:55AM -0300, Rik van Riel wrote:
On Sun, 8 Apr 2001, David S. Miller wrote:
Rik van Riel writes:
Anyway, since linux-kernel has chosen to not receive email from me
Funny how this posting went through then...
If it is specifically when you are sending
On Tue, 10 Apr 2001, Matti Aarnio wrote:
Dave said "remove DUL", I did that.
VGER uses now RBL and RSS, no others.
Thanks !
To come back to the spamfilter promise I made some time ago,
people can now get a CVS tree with spam regular expressions
and a script to generate a
G*rard Roudier insightfully opined..
Looks like an IRQ problem to me.
I mean the kernel wants to change IRQ routing and just do the wrong job.
Give the man a prize!
After failing to work with 2.4.0, 2.4.1, 2.4.3, and 2.4.3-ac3 I
enabled X86_UP_IOAPIC to stir up the interrupt code and it
Jeff Chua wrote:
depmod version 2.4.5
Compiled 2.4.4-pre1 but running "depmod" generates a lot of these ...
depmod: *** Unresolved symbols in
/lib/modules/2.4.4-pre1/kernel/drivers/char/ltmodem.o
depmod: strstr
depmod: *** Unresolved symbols in
On Mon, Apr 09, 2001 at 09:34:04PM +, Henning P. Schmiedehausen wrote:
Michael Peddemors [EMAIL PROTECTED] writes:
Uh... use their ISP relay service anyway???
I take my laptop all over, to lot's of my clients locations, and if I
could relay through their servers, then I had better give
Group,
Here's my last try. I've edited all of the headers (sched.h, param.h,
limits.h) in /usr/include and /usr/src/linux, I've recompiled the
shadow-utils and PAM. My limit is still 32. Am I missing something -
obvious? I did go ahead and upgrade to glibc-2.2-12 and kernel 2.4.3 (with
this is one of linux biggest weaknesses. the fixed interval timer is a
throwback. it should be replaced with a variable interval timer with interrupts
on demand for any system with a cpu sane/modern enough to have an on-chip
interrupting decrementer. (i.e just about any modern chip)
On Mon, 9 Apr 2001, Alan Cox wrote:
A typical startup with 6.1.9 proceeds like this... (6.1.10 hangs silently
after emitting the scsi0 and scsi1 adapter summaries, maybe it is
going through the same gyrations silently.)
Try saying N to the AIC7xxx driver and Y to AIC7XXX_OLD and see
Its worth doing even on the ancient x86 boards with the PIT.
Note that programming the PIT is slw and doing it on every timer
add_timer/del_timer would be a pain.
You only have to do it occasionally.
When you add a timer newer than the current one
(arguably newer by at
Originally to: Sean Rima
* Sean Rima's head hit the keyboard and wrote:
SR I am sorry if this is old news but I have not seen any mention of it in the
SR list.
SR I keep getting "kernel: Sound error: Couldn't allocate DMA buffer" in my
SR syslog. However sound was working until this morning.
In article 9aqmgo$8f6ol$[EMAIL PROTECTED] you write:
In article [EMAIL PROTECTED],
Marvin Stodolsky [EMAIL PROTECTED] wrote:
Thanks for responding. But I would still like to understand what the
functionality is of the build -- /usr/src/linuc. Is it dispensable,
once the module tree has been
So, Mr. Admin, setup your laptop to use SSL to your SMTP and POP
server and authenticate with a client side certificate on your
laptop. Welcome to the 21st century. You may, however, need a little
more infrastructure than you can pull from your favourite distribution
box.
From kufel!ankry Tue Apr 10 01:04:13 2001
Return-Path: kufel!ankry
Received: from kufel.UUCP (uucp@localhost)
by green.mif.pg.gda.pl (8.9.3/8.9.3) with UUCP id BAA01672
for green.mif.pg.gda.pl!ankry; Tue, 10 Apr 2001 01:04:13 +0200
Received: (from ankry@localhost)
by
On Mon, 9 Apr 2001 [EMAIL PROTECTED] wrote:
As you've observed, with the approach of waiting for all pre-empted tasks
to synchronize, the possibility of a task staying pre-empted for a long
time could affect the latency of an update/synchonize (though its hard for
me to judge how likely that
On 04.10 Vivek Dasmohapatra wrote:
On Mon, 9 Apr 2001, Alan Cox wrote:
A typical startup with 6.1.9 proceeds like this... (6.1.10 hangs silently
after emitting the scsi0 and scsi1 adapter summaries, maybe it is
going through the same gyrations silently.)
Try saying N to the
On Tue, Apr 10, 2001 at 01:00:08AM +0300, Matti Aarnio wrote:
Dave said "remove DUL", I did that.
VGER uses now RBL and RSS, no others.
Thank you, I don't believe there is anyone on this list who is likely to
object to these lists.
--
Joseph Carter [EMAIL PROTECTED]
Sorry, figured it out.
Jordan
Jordan wrote:
I went in to my .config and disabled 640 and 640 enhanced in favor of
trying the 64x ide support. I especially liked the fact that from the
code it look to have a /proc table similar the the via driver for my
onboard controller. Then during
This patch applies cleanly to 2.4.3-ac3.
Changes to array.c expose cpus_allowed in proc/pid/stat.
PR_GET_RUNON and PR_SET_RUNON were done by Ingo and Dimitris. Added
MUSTRUN_PID and RUNANY_PID.
Also attached is runon and it's manpage.
Nick
diff -X /home/npollitt/dontdiff -Nur
2.4.4-p1 is the kernel version that i've tried now. no succes with 2.4.3 and
below.
i've been trying without the CDROM and a normal HDD ata 66. i've made some
progress using the normal ide ata 66 driver and removing the osv4 from
kernel.
root@light:/# hdparm -t -T /dev/hda
/dev/hda:
Timing
This is up with some updates
Short notice development for Promise Ultra100 TX2 sponsored by
Penguin Computer and again little/no help from Promise.
This is a unique chipset that does setfeatures sensing of the transfer
rates and thus it is counter to the standard Promise design. It does
still
On Sun, Mar 25, 2001 at 11:10:14PM +, Pavel Machek wrote:
I've seen similar bugs. If you hook something on schedule_tq and forget
to set current-need_resched, this is exactly what you get.
keventd fixes tq_scheduler case (tq_scheduler is dead).
Andrea
-
To unsubscribe from this list: send
On Mon, 9 Apr 2001, Joseph Carter wrote:
On Tue, Apr 10, 2001 at 01:00:08AM +0300, Matti Aarnio wrote:
Dave said "remove DUL", I did that.
VGER uses now RBL and RSS, no others.
Thank you, I don't believe there is anyone on this list who is likely
to object to these lists.
got this path from Niels ...
Works for me now.
___
From: Niels Kristian Bech Jensen [EMAIL PROTECTED]
Try this patch:
diff -u --recursive --new-file
v2.4.4-pre1/linux/arch/i386/kernel/i386_ksyms.c
Hi,
I am having trouble with increasing the file descriptor size for my
application - it opens several files for each client session (and needs
to keep them open as long as the session is active, which can be upto 3
hours long). What I see from the application is "open failed in
As always, the latest version of this driver is availalbe here:
http://people.FreeBSD.org/~gibbs/linux/
This site now includes installation instructions, feature set,
etc. The page is under construction - comments welcome.
For the impatient:
CHANGELOG:
- Original Message -
From: "Wilfried Weissmann" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, April 08, 2001 10:44 AM
Subject: Re: UDMA(66) drive coming up as UDMA(33)?
"David St.Clair" wrote:
I'm trying to get my hard drive to use UDMA/66. I'm thinking the cable
is not
are there samples of linux codes that can talk to SCSI harddisk, scanners
and
cameras in the Linux kernel. Like in windows NT, one does not need to write
driver for his scsi device. Just use some scsi interface libraries to talk
to the scsi device. Is there such examples in linux?.I need to
So, what about on an alpha system. I've asked a few times what I could do,
but you didn't help nor explain what you meant.
From talking to the maintainer of the QLogic driver, it appears
that there is a generic issue with data mapping on the Alpha.
The only way to correct this issue will be for
- Original Message -
From: "David St.Clair" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, April 07, 2001 10:36 AM
Subject: UDMA(66) drive coming up as UDMA(33)?
I'm trying to get my hard drive to use UDMA/66. I'm thinking the cable
is not being detected. When the HPT366
I am having trouble with increasing the file descriptor size for my
application - it opens several files for each client session (and needs
to keep them open as long as the session is active, which can be upto 3
hours long). What I see from the application is "open failed in
Hello,
At Sun, 8 Apr 2001 20:08:13 -0700 (PDT),
Linus Torvalds wrote:
Can anybody shoot any holes in this? I haven't actually tested it, but
race conditions in locking primitives are slippery things, and I'd much
rather have an algorithm we can _think_ about and prove to be working. And
I
You write:
are there samples of linux codes that can talk to SCSI harddisk, scanners
and
cameras in the Linux kernel. Like in windows NT, one does not need to write
driver for his scsi device. Just use some scsi interface libraries to talk
to the scsi device. Is there such examples in
Greetings,
I've been using the new aic7xxx driver, and updating frequently from Justin's site.
I'm at v6.1.11 now with kernel 2.4.3 and still experiencing some odd behaviour. For
example, I start as such on BUS 0 (an aic-29160):
Channel A Target 5 Negotiation Settings
User:
Hello,
I'm wondering if anyone has used this motherboard and can confirm if it
works under 2.4.3 or not. Having been burned by the Via-based CUV4X-D not
working under Linux, I'm keen to find out if this ServerWorks-based board
works or not, before throwing away my money.
Asus CUR-DLS, ATX,
Hi all,
When I unmount the swapfile I get:
VM: Undead swap entry 000bb300
VM: Undead swap entry 00abb300
VM: Undead swap entry 016fb300
I can repeat this fairly reliably. First fill up the conventional
memory, and a few 10s of Mb of swap, then put the machine under a bit
of a load. It may
SodaPop wrote:
I too have noticed that nicing processes does not work nearly as
effectively as I'd like it to. I run on an underpowered machine,
and have had to stop running things such as seti because it steals too
much cpu time, even when maximally niced.
As an example, I can run
Well, I'm positive what I have is an 80pin cable. I may try a diffrent
one. I guess I could benchmark the drive in windows and see how it
compares to linux. (Both are on the same drive). The HPT366 chip is
integrated on the BE6 motherboard.
The manual says PIO 4 mode should get about 16.6 Mb/s,
__
===
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi,
I've run into the following weird behavior on my system with 2.4.0. I have
the following code:
if (fork() == 0)
{
int Flags,dummy;
if ((Flags = fcntl(STDIN_FILENO,F_GETFL,dummy)) 0)
_exit(100);
if (fcntl(STDIN_FILENO,F_SETFL,Flags | O_NONBLOCK) 0)
_exit(100);
Hi everybody,
I want to put some filter condition on ethernet driver in Promiscuous
mode so as it allow packets to IP stack having Virtual mac address
existing in say some Dynamic list.Can anybody help how can I do it.
I am using eepro100.
-
To unsubscribe from this list: send the line
On Mon, Apr 09, 2001 at 01:04:47PM +0200, Heusden, Folkert van wrote:
However, only 3 drivers in drivers/net actually set
SA_SAMPLE_RANDOM when calling request_irq(). I believe
all of them should.
No, because an attacker can potentially control input and make it
non-random.
AB 2. Given
201 - 300 of 304 matches
Mail list logo
