On 09/03/2014 02:50 PM, Jonghwa Lee wrote:
> When it writes some value other than 0 to BTLDset and JIGset, muic device
> will be reset automatically. And it happens during updating ADC debounce time,
> because it shares same register. To update ADC debounce time without reset,
> set value only to
For now, there are NCHUNKS of 64 freelists in zbud_pool, the last unbuddied[63]
freelist linked with all zbud pages which have free chunks of 63. Calculating
according to context of num_free_chunks(), our max chunk number of unbuddied
zbud page is 62, so none of zbud pages will be added/removed in
commit 21caf2fc1931 ("mm: teach mm by current context info to not do I/O during
memory allocation")
introduces PF_MEMALLOC_NOIO flag to avoid doing I/O inside memory allocation,
__GFP_IO is cleared
when this flag is set, but __GFP_FS implies __GFP_IO, it should also be
cleared. Or it may still
Hi
On Mon, Sep 1, 2014 at 7:08 PM, Pranith Kumar wrote:
> This test currently fails on 32-bit systems since we use u64 type to pass the
> flags to fcntl.
>
> This commit changes this to use 'unsigned int' type for flags to fcntl making
> it
> work on 32-bit systems.
>
> Signed-off-by: Pranith
When it writes some value other than 0 to BTLDset and JIGset, muic device
will be reset automatically. And it happens during updating ADC debounce time,
because it shares same register. To update ADC debounce time without reset,
set value only to ADCDbset and 0 to BTLDset and JIGset.
The following compilation error occurs on 64-bit Exynos7 SoC:
drivers/irqchip/exynos-combiner.c: In function ‘combiner_irq_domain_map’:
drivers/irqchip/exynos-combiner.c:162:2: error: implicit declaration of
function ‘set_irq_flags’ [-Werror=implicit-function-declaration]
set_irq_flags(irq,
On Wed, 2014-09-03 at 00:29 -0400, Pranith Kumar wrote:
> Hi Joe,
Hello Pranith.
> On Wed, Sep 3, 2014 at 12:25 AM, Joe Perches wrote:
> > You need to use parentheses around the description like:
> > commit ("commit description")
> > For your case:
> > Commit 615cc2c9cf95
> Subject: Re: [alsa-devel] [PATCHv2 1/4] ASoC: simple-card: add
> asoc_simple_card_fmt_master() to simplify the code.
>
>
> Hi Xiubo
>
> > Yes your patch has fixed the bug Jyri has pointed out.
> >
> > So I has discard my [PATCHv2 1/4] patch.
> >
> > Please send your patch out to replace this
On 09/02/2014 11:42 PM, Paolo Bonzini wrote:
> Il 29/08/2014 12:31, Paolo Bonzini ha scritto:
>> David and Xiao, here's my take on the MMIO generation patches. Now
>> with documentation, too. :) Please review!
>>
>> David Matlack (2):
>> kvm: fix potentially corrupt mmio cache
>> kvm: x86:
From: Harish Jenny Kandiga Nagaraj
Date: Wed, 3 Sep 2014 10:49:59 +0530
> If that is the case , then subscriptions of netlink_sock should have
> been updated after netlink_remove or netlink_release. I don't see
> that happening.
Please do not top-post. First provide the quoted context, then
Hi Greg,
On Thursday 28 August 2014 03:55 PM, Kishon Vijay Abraham I wrote:
> Hi Greg,
>
> Please find the pull request for this -rc cycle. It consistes of a regression
> fix to runtime PM on OMAP (cc'ed stable) and few other minor fixes.
>
> Please consider merging it in this -rc cycle.
> Let
If that is the case , then subscriptions of netlink_sock should have been
updated after netlink_remove or netlink_release.
I don't see that happening.
On Wednesday 03 September 2014 12:22 AM, David Miller wrote:
> From: Harish Jenny Kandiga Nagaraj
> Date: Tue, 2 Sep 2014 14:14:38 +0530
>
>> In
On Wed, Sep 3, 2014 at 10:09 AM, Viresh Kumar wrote:
> Don't have Zoran's new email address, but probably other might have
> answers to my queries.
Got Zoran's email id finally :)
> I have just started with the power-supply framework a day or two back
> and so my understanding might not be good
This patch adds to handle corner buggy cases for fsck.f2fs.
Signed-off-by: Jaegeuk Kim
---
fs/f2fs/segment.c | 10 +-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/fs/f2fs/segment.c b/fs/f2fs/segment.c
index 46586d3..853c8f5 100644
--- a/fs/f2fs/segment.c
+++
This patch adds three inline functions to clean up dirty casting codes.
Signed-off-by: Jaegeuk Kim
---
fs/f2fs/checkpoint.c | 18 +++---
fs/f2fs/data.c | 31 ++-
fs/f2fs/dir.c| 13 +
fs/f2fs/f2fs.h | 23
If any f2fs_bug_on is triggered, fsck.f2fs is needed.
Signed-off-by: Jaegeuk Kim
---
fs/f2fs/checkpoint.c | 6 +++---
fs/f2fs/data.c | 4 ++--
fs/f2fs/dir.c| 4 ++--
fs/f2fs/f2fs.h | 26 ++-
fs/f2fs/file.c | 2 +-
fs/f2fs/inline.c | 4 ++--
If the roll-forward recovery was failed, we'd better conduct fsck.f2fs.
Signed-off-by: Jaegeuk Kim
---
fs/f2fs/super.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/fs/f2fs/super.c b/fs/f2fs/super.c
index a692304..3275e73 100644
--- a/fs/f2fs/super.c
+++ b/fs/f2fs/super.c
@@ -1083,6
This patch replaces BUG cases with f2fs_bug_on to remain fsck.f2fs information.
And it implements some void functions to initiate fsck.f2fs too.
Signed-off-by: Jaegeuk Kim
---
fs/f2fs/segment.c | 4 ++--
fs/f2fs/segment.h | 38 +++---
2 files changed, 37
On Wed, Sep 03, 2014 at 12:21:24PM +0800, Junxiao Bi wrote:
> On 09/03/2014 11:10 AM, Dave Chinner wrote:
> > On Wed, Sep 03, 2014 at 09:38:31AM +0800, Junxiao Bi wrote:
> >> Hi Jiufei,
> >>
> >> On 09/02/2014 05:03 PM, Xue jiufei wrote:
> >>> Hi, Dave
> >>> On 2014/9/2 7:51, Dave Chinner wrote:
>
This patch adds sbi->need_fsck to conduct fsck.f2fs later.
This flag is only able to be removed by fsck.f2fs.
Signed-off-by: Jaegeuk Kim
---
fs/f2fs/checkpoint.c| 3 +++
fs/f2fs/f2fs.h | 1 +
fs/f2fs/super.c | 1 +
include/linux/f2fs_fs.h | 1 +
4 files changed, 6
On Wed, Jul 9, 2014 at 8:49 AM, Vincent Palatin wrote:
> Map V4L2_CID_TILT_SPEED and V4L2_CID_PAN_SPEED to the standard UVC
> CT_PANTILT_RELATIVE_CONTROL terminal control request.
>
> Tested by plugging a Logitech ConferenceCam C3000e USB camera
> and controlling pan/tilt from the userspace using
On Sat, Aug 16, 2014 at 4:08 AM, Vincent Palatin wrote:
>
> The V4L2_CID_PAN_SPEED and V4L2_CID_TILT_SPEED controls allow to move the
> camera by setting its rotation speed around its axis.
>
> Signed-off-by: Vincent Palatin
Reviewed-by: Pawel Osciak
>
> ---
> Changes from v1:
> - update the
Don't have Zoran's new email address, but probably other might have
answers to my queries.
I have just started with the power-supply framework a day or two back
and so my understanding might not be good enough :)
On Sat, Aug 3, 2013 at 2:08 AM, Zoran Markovic
wrote:
> diff --git
Hi Linus,
This is a pull request on the f2fs bug fixes for v3.17-rc4.
Most of things are related to recovery and error handling routines.
Please pull these patches.
Thank you very much,
The following changes since commit 63d871cb0b9e4207044ced0322aa34d859fa463d:
Merge tag 'md/3.17-fixes' of
Hi Joe,
On Wed, Sep 3, 2014 at 12:25 AM, Joe Perches wrote:
>
> You need to use parentheses around the description like:
> commit ("commit description")
>
> For your case:
>
> Commit 615cc2c9cf95 ("Documentation/memory-barriers.txt: fix important
> typo re memory barriers")
>
Ah, OK.
On Wed, 2014-09-03 at 00:03 -0400, Pranith Kumar wrote:
> I receive an ERROR when running checkpatch.pl on a patch containing
> the following line:
>
> Commit 615cc2c9cf95 "Documentation/memory-barriers.txt: fix important typo re
>
> saying that the commit ID should be 12 or more characters when
On 09/03/2014 11:10 AM, Dave Chinner wrote:
> On Wed, Sep 03, 2014 at 09:38:31AM +0800, Junxiao Bi wrote:
>> Hi Jiufei,
>>
>> On 09/02/2014 05:03 PM, Xue jiufei wrote:
>>> Hi, Dave
>>> On 2014/9/2 7:51, Dave Chinner wrote:
On Fri, Aug 29, 2014 at 05:57:22PM +0800, Xue jiufei wrote:
> The
On Tue, 02 Sep 2014 10:24:24 -0600
Jens Axboe wrote:
> On 09/02/2014 10:21 AM, Christoph Hellwig wrote:
> > Btw, one thing we should reconsider is where we set
> > QUEUE_FLAG_NO_SG_MERGE. At least for virtio-blk it seems to me that
> > doing the S/G merge should be a lot cheaper than fanning
Hi Xiubo
> Yes your patch has fixed the bug Jyri has pointed out.
>
> So I has discard my [PATCHv2 1/4] patch.
>
> Please send your patch out to replace this one.
(snip)
> Please send it out of your local patch.
>
> Please also consider the ideas about Jyri, Jean-Francios, Varka and
>
On 09/02/2014 09:22 PM, Konrad Rzeszutek Wilk wrote:
On Mon, Sep 01, 2014 at 06:03:06AM +0200, Juergen Gross wrote:
On 08/29/2014 04:55 PM, Konrad Rzeszutek Wilk wrote:
On Fri, Aug 29, 2014 at 03:44:06PM +0100, Jan Beulich wrote:
On 29.08.14 at 16:27, wrote:
Sure. Btw, someone also
As the kbuild test robot reports, rcu_dereference() isn't really
appropriate here - we don't need a memory barrier, just a guard
against accidentally dereferencing NULL.
This can be merged into
autofs4: d_manage() should return -EISDIR when appropriate in rcu-walk mode.
in 'mm'.
I receive an ERROR when running checkpatch.pl on a patch containing
the following line:
Commit 615cc2c9cf95 "Documentation/memory-barriers.txt: fix important typo re
saying that the commit ID should be 12 or more characters when the
commit ID is indeed 12 characters. I tried fixing it, but my
On Tue, Sep 2, 2014 at 8:07 PM, Felipe Balbi wrote:
> On Mon, Sep 01, 2014 at 01:30:21PM +0530, Vivek Gautam wrote:
>> On Thu, Aug 28, 2014 at 8:36 PM, Daniele Forsi wrote:
>> > 2014-08-28 10:02 GMT+02:00 Vivek Gautam:
>> >
>> >> This USB 3.0 PHY controller is also present on Exynos7
>> >>
This patch fix spelling typo found in DocBook/networking.xml.
It is because the neworking.xml is generated from comments
in the source, I have to fix typo in comments within the source.
Signed-off-by: Masanari Iida
---
include/linux/netdevice.h | 4 ++--
include/net/wimax.h| 2 +-
On Wed, Sep 03, 2014 at 08:09:28AM +0800, Xuetao Guan wrote:
>
> [...]
> > >
> > > >
> > > > unicore32: Add ocd console and qemu-defconfig to support qemu simulator
> > > > This patch adds a primitive OCD console to communicate with
> > > > qemu.
> > > > The same code is
On Fri, Aug 29, 2014 at 12:58 AM, Felipe Balbi wrote:
> On Thu, Aug 28, 2014 at 01:31:59PM +0530, Vivek Gautam wrote:
>> The Exynos-DWC3 USB 3.0 DRD controller is also present on
>> Exynos7 platform, so adding the dependency on ARCH_EXYNOS7
>> for this driver.
>>
>> Signed-off-by: Vivek Gautam
Hi,
On Tue, Sep 2, 2014 at 8:52 PM, Doug Anderson wrote:
> Chris,
>
> On Tue, Sep 2, 2014 at 7:01 PM, Chris Zhong wrote:
>>
>> On 09/02/2014 11:58 AM, Doug Anderson wrote:
+static int rk808_rtc_probe(struct platform_device *pdev)
>+{
>+ struct rk808 *rk808 =
Chris,
On Tue, Sep 2, 2014 at 7:01 PM, Chris Zhong wrote:
>
> On 09/02/2014 11:58 AM, Doug Anderson wrote:
>>>
>>> +static int rk808_rtc_probe(struct platform_device *pdev)
>>> >+{
>>> >+ struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
>>> >+ struct rk808_rtc *rk808_rtc;
>>>
Ping :)
Thanks,
BRs
Xiubo
> -Original Message-
> From: Xiubo Li [mailto:li.xi...@freescale.com]
> Sent: Tuesday, August 26, 2014 1:46 PM
> To: daniel.lezc...@linaro.org; t...@linutronix.de
> Cc: Wang Dongsheng-B40534; linux-kernel@vger.kernel.org; Xiubo Li-B47053
> Subject: [PATCH
This patch fix spelling typo found in tool/perf/Documentation.
Signed-off-by: Masanari Iida
---
tools/perf/Documentation/perf-diff.txt | 6 +++---
tools/perf/Documentation/perf-kvm.txt | 4 ++--
tools/perf/Documentation/perf-list.txt | 2 +-
On Tue, Sep 2, 2014 at 8:12 PM, Pankaj Dubey wrote:
> Currently a syscon entity can only be registered directly through a
> platform device that binds to a dedicated syscon driver. However in
> certain cases it is required to bind a device with it's dedicated
> driver rather than binding with
Hello, Ingo,
This series contains a single commit fixing an initialization bug
reported by Amit Shah and fixed by Pranith Kumar (and tested by Amit).
This bug results in a boot-time hang in callback-offloaded configurations
where callbacks were posted before the offloading ("rcuo") kthreads
were
> Subject: Re: [alsa-devel] [PATCHv2 1/4] ASoC: simple-card: add
> asoc_simple_card_fmt_master() to simplify the code.
>
>
> Hi Xiubo
>
> > Yes, I think it make sense to set all fmt in one function, and will
> > Be more readable.
> >
> > I agree with you, could you please just wait, because
Hi Xiubo
> Yes, I think it make sense to set all fmt in one function, and will
> Be more readable.
>
> I agree with you, could you please just wait, because there has many
> Replications and good Ideas about this patch, and I will revise it.
> Then you can improve it as your patch blow.
Thank
Hi Kuninori-san,
Yes your patch has fixed the bug Jyri has pointed out.
So I has discard my [PATCHv2 1/4] patch.
Please send your patch out to replace this one.
Thanks,
BRs
Xiubo
> -Original Message-
> From: Xiubo Li-B47053
> Sent: Wednesday, September 03, 2014 10:22 AM
> To:
Correct the example of memory orderings in memory-barriers.txt
Commit 615cc2c9cf95 "Documentation/memory-barriers.txt: fix important typo re
memory barriers" changed the assignment to x and y. Change the rest of the
example to match this change.
Reported-by: Ganesh Rapolu
Signed-off-by: Pranith
On Tue, Sep 2, 2014 at 12:08 PM, Paul E. McKenney
wrote:
> Could you please adjust in this way? Again, the point is to be the
> first few items in a full set of permutations, not to illustrate selected
> orderings/outcomes.
>
OK, if that is the case then replacing x with y is much easier. I
Hi Junxiao
On 2014/9/3 9:38, Junxiao Bi wrote:
> Hi Jiufei,
>
> On 09/02/2014 05:03 PM, Xue jiufei wrote:
>> Hi, Dave
>> On 2014/9/2 7:51, Dave Chinner wrote:
>>> On Fri, Aug 29, 2014 at 05:57:22PM +0800, Xue jiufei wrote:
The patch trys to solve one deadlock problem caused by cluster
On Tue, Sep 02, 2014 at 05:49:37PM +0200, Jean-Michel Hautbois wrote:
> This property is useful when we don't want to access boot partitions on eMMC
>
Any special reason why not access boot partitions on eMMC?
Not allow user to access it?
> Signed-off-by: Jean-Michel Hautbois
> ---
>
allow user space to generate eBPF programs
uapi/linux/bpf.h: eBPF instruction set definition
linux/filter.h: the rest
This patch only moves macro definitions, but practically it freezes existing
eBPF instruction set, though new instructions can still be added in the future.
These eBPF
move instruction macros (like BPF_MOV64_REG or BPF_ALU32_IMM)
from linux/filter.h into uapi/linux/bpf.h
so that userspace programs can use them.
verifier testsuite (in later patches) will be using them.
Signed-off-by: Alexei Starovoitov
---
include/linux/filter.h | 226
userspace programs that wish to use eBPF instruction macros
(like BPF_MOV64_REG or BPF_ALU32_IMM) need to include two files:
uapi/linux/filter.h and uapi/linux/bpf.h
Move common macro definitions that are shared between
classic BPF and eBPF into uapi/linux/bpf_common.h
Signed-off-by: Alexei
add BPF_LD_IMM64 instruction to load 64-bit immediate value into a register.
All previous instructions were 8-byte. This is first 16-byte instruction.
Two consecutive 'struct bpf_insn' blocks are interpreted as single instruction:
insn[0].code = BPF_LD | BPF_DW | BPF_IMM
insn[0].dst_reg =
Hi,
V8->V9
- rebase on top of Hannes's patch in the same area [1]
- no changes to patches 1 and 2
- added patches 3 and 4 as RFC to address Daniel's concern.
patch 3 moves eBPF instruction macros and
patch 4 split macros which are shared between classic and eBPF
into bpf_common.h
3 and 4
Any comment and advice are welcome.
Change in v3:
- Fix binding from Jean's comment.
- Remove 'ASoC: simple-card: add asoc_simple_card_fmt_master() to simplify the
code.'
and will send it separately later.
Change in v2:
- Maintian compatibility with the old DTs.
Change in v1:
- Add
Signed-off-by: Xiubo Li
---
sound/soc/generic/simple-card.c | 48 -
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index 1597a24..07f7fb6 100644
---
On 09/02/2014 06:33 PM, Johannes Weiner wrote:
> kfree isn't eating 56% of "all cpu time" here, and it wasn't clear to
> me whether Dave filtered symbols from only memcontrol.o, memory.o, and
> mmap.o in a similar way. I'm not arguing against the regression, I'm
> just trying to make sense of the
This patch will split the DT node into old style and new style:
The new style will merge the single DAI link and muti DAI links code
together, the new style will be easier to add muti DAI links from old
single DAI link DTs.
This patch will maintian compatibility with the old DTs.
Signed-off-by:
This update patch will split the DT node into old style and new style:
The new style will will be easier to add muti DAI links from old single
DAI link DTs.
This patch will maintian compatibility with the old DTs.
Signed-off-by: Xiubo Li
---
.../devicetree/bindings/sound/simple-card.txt |
Ping? :)
(2014/08/25 19:55), Masami Hiramatsu wrote:
> Hi,
>
> Here is a series of patches which remove stop_machine() from
> module unloading.
>
> Currently, each module unloading calls stop_machine()s 2 times.
> One is for safely removing module from lists and one is to
> check the reference
On Wed, Sep 03, 2014 at 09:38:31AM +0800, Junxiao Bi wrote:
> Hi Jiufei,
>
> On 09/02/2014 05:03 PM, Xue jiufei wrote:
> > Hi, Dave
> > On 2014/9/2 7:51, Dave Chinner wrote:
> >> On Fri, Aug 29, 2014 at 05:57:22PM +0800, Xue jiufei wrote:
> >>> The patch trys to solve one deadlock problem caused
This patch support many TRIMINFO_CTRL registers if specific Exynos SoC
has one more TRIMINFO_CTRL registers. Also this patch uses proper 'RELOAD'
shift/mask bit operation to set RELOAD feature instead of static value.
Signed-off-by: Chanwoo Choi
Acked-by: Kyungmin Park
Cc: Zhang Rui
Cc:
This patchset add the support of TRIMINFO_RELOAD feature for Exynos3250.
But Exynos3250 has two TRIMINFO_CTRL register instead other Exynos has only one
TRIMINFO_CTRL register. So, this patchset support the some Exynos SoC which
has more than one TRIMINF_CTRL.
Also, this patchset fix wrong value
This patch add support for TRIM_RELOAD feature at Exynos3250. The TMu of
Exynos3250 has two TRIMINFO_CON register and must need to set RELOAD bit
before reading TRIMINFO register.
Signed-off-by: Chanwoo Choi
Acked-by: Kyungmin Park
Cc: Zhang Rui
Cc: Eduardo Valentin
Cc: Amit Daniel Kachhap
If the hw doesn't have a valid MAC address, give a random one and
set it to the hw.
Signed-off-by: Hayes Wang
---
drivers/net/usb/r8152.c | 35 ---
1 file changed, 20 insertions(+), 15 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
If the interface has invalid MAC address, it couldn't
be used. In order to let it work normally, give a
random one.
v2:
Use "%pM" format specifier for printing a MAC address.
Hayes Wang (2):
r8152: change the location of rtl8152_set_mac_address
r8152: use eth_hw_addr_random
Exchange the location of rtl8152_set_mac_address() and
set_ethernet_addr(). Then, the set_ethernet_addr() could
set the MAC address by calling rtl8152_set_mac_address()
later.
Signed-off-by: Hayes Wang
---
drivers/net/usb/r8152.c | 34 +-
1 file changed, 17
From: "Tan, Raymond"
Use the platform data to set the clk_freq when there is no DT configuration
available. The clk_freq in turn will determine the I2C speed mode.
In Quark, there is currently no other configuration mechanism other than
board files.
Signed-off-by: Raymond Tan
Reviewed-by:
From: "Tan, Raymond"
Hi,
This patch is for enabling support of Intel Quark X1000 i2c controller. The
Quark designware i2c controller is registered as a MFD device, and Quark
exports a single PCI device with both I2C and GPIO functions.
In Quark, there is currently no other configuration
To get more comprehensive and integrated thermal management, it adds ntc
thermistor to thermal framework as a thermal sensor. It's governed thermal
susbsystem only if it is described in DT node. Otherwise, it just notifies
temperature to userspace via sysfs as it used to be.
Signed-off-by:
Quoting Soren Brinkmann (2014-09-02 16:02:06)
> Hi,
>
> triggered by that discussion whether checkpatch should be used to check
> files, I ran checkpatch on Zynq's clock code. A few of the reported
> issues I found worth fixing.
Applied to clk-next.
Regards,
Mike
>
> Thanks,
>
> Subject: Re: [PATCHv2 1/4] ASoC: simple-card: add
> asoc_simple_card_fmt_master()
> to simplify the code.
>
> On 09/02/2014 12:26 PM, Xiubo Li wrote:
> > Signed-off-by: Xiubo Li
> > ---
> > sound/soc/generic/simple-card.c | 61 -
>
> > 1 file
Hi DTS maintainers,
If possible, can I please get an Acked-by for this patch?
Many thanks...
Dinh
On 8/11/14, 10:18 AM, ttha...@opensource.altera.com wrote:
> From: Thor Thayer
>
> Add the Altera SDRAM EDAC bindings and device tree changes to the Altera SoC
> project.
>
> Signed-off-by:
> Subject: Re: [alsa-devel] [PATCHv2 3/4] ASoC: simple-card: Adjust the comments
> of simple card.
>
>
> Hi Xiubo
>
> > > > /*
> > > > -* soc_bind_dai_link() will check cpu name
> > > > -* after of_node matching if dai_link has cpu_dai_name.
> > > > -* but, it
Hi Kuninori-san,
Yes, I think it make sense to set all fmt in one function, and will
Be more readable.
I agree with you, could you please just wait, because there has many
Replications and good Ideas about this patch, and I will revise it.
Then you can improve it as your patch blow.
Thanks,
Hi Xiubo
> > > /*
> > > - * soc_bind_dai_link() will check cpu name
> > > - * after of_node matching if dai_link has cpu_dai_name.
> > > - * but, it will never match if name was created by fmt_single_name()
> > > - * remove cpu_dai_name to escape name matching.
> > > - * see
> > > + * In
Hi,
On 09/03/2014 11:10 AM, Fu, Zhonghui wrote:
>
> Hi,Uffe
>
> Could you please tell me into which git repository this patch is merged now?
I knew it was merged into Ulf's git repository.
You can refer to below git.
url = http://git.linaro.org/git/people/ulf.hansson/mmc.git
Best Regards,
On Tue, Sep 02, 2014 at 06:22:52PM -0500, Christoph Lameter wrote:
> On Tue, 2 Sep 2014, Paul E. McKenney wrote:
>
> > Yep, these two have been on my "when I am feeling insanely gutsy" list
> > for quite some time.
> >
> > But I have to ask... On x86, is a pair of mfence instructions really
> >
Signed-off-by: Caesar Wang
---
arch/arm/boot/dts/rk3288.dtsi | 18 ++
1 file changed, 18 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 36be7bb..3d672e3 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
Thermal is TS-ADC Controller module supports
user-defined mode and automatic mode.
User-defined mode refers,TSADC all the control signals entirely by
software writing to register for direct control.
Automaic mode refers to the module automatically poll TSADC output,
and the results were
Signed-off-by: Caesar Wang
---
arch/arm/boot/dts/rk3288-evb.dtsi | 7 +++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi
b/arch/arm/boot/dts/rk3288-evb.dtsi
index 2964370..fe85dde 100644
--- a/arch/arm/boot/dts/rk3288-evb.dtsi
+++
Changes in v4:
* address comments from Jonathan Cameron,huangtao and zhaoyifeng:
- this series thermal driver still be put in driver/thermal/
- modify the thermal driver description.
Changes in v3:(add dts configure)
* address comments from Dmitry Torokhov and Arnd
This add the necessary binding documentation for the thermal
found on Rockchip SoCs
Signed-off-by: zhaoyifeng
Signed-off-by: Caesar Wang
---
.../devicetree/bindings/thermal/rockchip-thermal.txt | 20
1 file changed, 20 insertions(+)
create mode 100644
Hi,Uffe
Could you please tell me into which git repository this patch is merged now?
Thanks,
Zhonghui
On 2014/8/26 0:10, Fu, Zhonghui wrote:
>
> Many thanks for your helps.
>
>
>
> Thanks,
> Zhonghui
>
>
> On 2014/8/18 20:07, Ulf Hansson wrote:
>> On 18 August 2014 05:04, Fu, Zhonghui
Dear Eduardo,
On 08/30/2014 04:28 AM, Eduardo Valentin wrote:
> Chanwoo,
>
> On Fri, Aug 29, 2014 at 08:50:41AM +0900, Chanwoo Choi wrote:
>> Dear Eduardo,
>>
>> On 08/28/2014 11:53 PM, Eduardo Valentin wrote:
>>> On Thu, Aug 28, 2014 at 01:25:14PM +0900, Chanwoo Choi wrote:
Dear Eduardo,
On 09/02/2014 11:58 AM, Doug Anderson wrote:
+static int rk808_rtc_probe(struct platform_device *pdev)
>+{
>+ struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
>+ struct rk808_rtc *rk808_rtc;
>+ struct rtc_time tm;
>+ int ret;
>+
>+ rk808_rtc =
> Subject: Re: [PATCHv2 3/4] ASoC: simple-card: Adjust the comments of simple
> card.
>
> On Tue, 2 Sep 2014 17:26:08 +0800
> Xiubo Li wrote:
>
> > @@ -285,11 +287,11 @@ static int asoc_simple_card_dai_link_of(struct
> device_node *node,
> > dai_props->codec_dai.sysclk);
> >
> >
Hi, Dave
On 2014/9/3 9:02, Dave Chinner wrote:
> On Tue, Sep 02, 2014 at 05:03:27PM +0800, Xue jiufei wrote:
>> Hi, Dave
>> On 2014/9/2 7:51, Dave Chinner wrote:
>>> On Fri, Aug 29, 2014 at 05:57:22PM +0800, Xue jiufei wrote:
The patch trys to solve one deadlock problem caused by cluster
> Subject: Re: [PATCHv2 4/4] ASoC: simple-card: binding: update binding to
> support the new style.
>
> On Tue, 2 Sep 2014 17:26:09 +0800
> Xiubo Li wrote:
>
> > +Example 4 - many DAI links:
> > sound {
> > compatible = "simple-audio-card";
> > simple-audio-card,name = "Cubox Audio";
>
On 09/02/2014 05:09 PM, Xuetao Guan wrote:
[...]
unicore32: Add ocd console and qemu-defconfig to support qemu simulator
This patch adds a primitive OCD console to communicate with qemu.
The same code is already used for early console support.
Do you mean there's the
Hi Gleb,
By the way, when testing nested vm, I started L1 and L2 vm with
-cpu XXX, -x2apic
But with or with out this patch 5/6, when migrating apic access page,
the nested vm didn't corrupt.
We cannot migrate L2 vm because it pinned some other pages in memory.
Without this patch, if we
On 09/02/2014 09:55 PM, Andrzej Hajda wrote:
> Since file pointer is preserved in c_node passing it
> as argument in node functions is redundant.
>
> Signed-off-by: Andrzej Hajda
> ---
> v3:
> - file check moved to next patch
> ---
> drivers/gpu/drm/exynos/exynos_drm_ipp.c | 12 +---
>
Hi Gleb,
On 09/03/2014 12:00 AM, Gleb Natapov wrote:
..
+static void vcpu_reload_apic_access_page(struct kvm_vcpu *vcpu)
+{
+ /*
+* apic access page could be migrated. When the page is being migrated,
+* GUP will wait till the migrate entry is replaced with the new pte
Hi Jiufei,
On 09/02/2014 05:03 PM, Xue jiufei wrote:
> Hi, Dave
> On 2014/9/2 7:51, Dave Chinner wrote:
>> On Fri, Aug 29, 2014 at 05:57:22PM +0800, Xue jiufei wrote:
>>> The patch trys to solve one deadlock problem caused by cluster
>>> fs, like ocfs2. And the problem may happen at least in the
On Tue, Sep 02, 2014 at 05:20:55PM -0700, Linus Torvalds wrote:
> On Tue, Sep 2, 2014 at 5:10 PM, Johannes Weiner wrote:
> >
> > That looks like a partial profile, where did the page allocator, page
> > zeroing etc. go? Because the distribution among these listed symbols
> > doesn't seem all
Am Montag, 1. September 2014, 07:11:20 schrieb Stephan Mueller:
Hi Herbert,
may I ask for consideration of this patch as this covers an oops FIPS mode?
In addition, may I ask for guidance on how to fix the 32 bit code path in
Linus' tree as asked on 28.8? To quote: "Thus, the fix in
This patch addresses two things for a pvh boot vcpu:
- NX bug on intel: It was recenlty discovered that NX is not being
honored in PVH on intel since EFER.NX is not being set.
- PVH boot hang on newer xen: Following c/s on xen
c/s 7645640: x86/PVH: don't set EFER_SCE for pvh
Changes from V1:
- Unify the patches into one
- Unify the code to set the EFER bits.
thanks,
Mukesh
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at
Properly pack the data for file copy functionality. Patch based on
investigation done by Matej Muzila
Signed-off-by: K. Y. Srinivasan
Reported-by: q...@redhat.com
Cc:
---
include/uapi/linux/hyperv.h |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git
Hi Christoph,
Sorry for the late reply.
(2014/08/29 9:50), Christoph Hellwig wrote:
I'm not sure this is the correct way.
Currently we have quite some code duplication in scsi_trace.c and
constants.c, correct.
So I definitely would like to see them both merged.
But constants.c is influenced
1 - 100 of 1554 matches
Mail list logo