Hi Dave, sorry for the late reply.
On Tue, 2020-10-06 at 18:14 +0100, Dave Stevenson wrote:
> Hi Maxime
>
> On Tue, 6 Oct 2020 at 16:26, Maxime Ripard wrote:
> > Hi Dave,
> >
> > On Fri, Oct 02, 2020 at 04:57:05PM +0100, Dave Stevenson wrote:
> > > Hi Maxime
> > >
> > > On Fri, 2 Oct 2020 at
Hi Maxime
On Tue, 6 Oct 2020 at 16:26, Maxime Ripard wrote:
>
> Hi Dave,
>
> On Fri, Oct 02, 2020 at 04:57:05PM +0100, Dave Stevenson wrote:
> > Hi Maxime
> >
> > On Fri, 2 Oct 2020 at 16:19, Maxime Ripard wrote:
> > >
> > > Hi Tim,
> > >
> > > On Thu, Oct 01, 2020 at 11:15:46AM +0100, Tim
Hi Dave,
On Fri, Oct 02, 2020 at 04:57:05PM +0100, Dave Stevenson wrote:
> Hi Maxime
>
> On Fri, 2 Oct 2020 at 16:19, Maxime Ripard wrote:
> >
> > Hi Tim,
> >
> > On Thu, Oct 01, 2020 at 11:15:46AM +0100, Tim Gover wrote:
> > > hdmi_enable_4k60=1 causes the firmware to select 3.3 GHz for the
Hi Maxime
On Fri, 2 Oct 2020 at 16:19, Maxime Ripard wrote:
>
> Hi Tim,
>
> On Thu, Oct 01, 2020 at 11:15:46AM +0100, Tim Gover wrote:
> > hdmi_enable_4k60=1 causes the firmware to select 3.3 GHz for the PLLC
> > VCO to support a core-frequency of 550 MHz which is the minimum
> > frequency
Hi Tim,
On Thu, Oct 01, 2020 at 11:15:46AM +0100, Tim Gover wrote:
> hdmi_enable_4k60=1 causes the firmware to select 3.3 GHz for the PLLC
> VCO to support a core-frequency of 550 MHz which is the minimum
> frequency required by the HVS at 4Kp60. The side effect is that if the
> display clock
Sorry, my previous statement was misleading.
enable_uart will select the mini_uart for gpio14,15 unless the
disable-bt device tree overlay is loaded. As well as disabling
bluetooth disable-bt swaps the uart0 pin configs to point the regular
UART to gpio 14,15. After resolving the DT overlays the
On Thu, Oct 01, 2020 at 11:22:03AM +0200, Nicolas Saenz Julienne wrote:
> On Wed, 2020-09-30 at 09:38 -0700, Nathan Chancellor wrote:
> > On Wed, Sep 30, 2020 at 04:07:58PM +0200, Maxime Ripard wrote:
> > > Hi Nathan,
> > >
> > > On Tue, Sep 29, 2020 at 03:15:26PM -0700, Nathan Chancellor wrote:
Hi Tim, thanks for the info!
On Thu, 2020-10-01 at 11:15 +0100, Tim Gover wrote:
> hdmi_enable_4k60=1 causes the firmware to select 3.3 GHz for the PLLC
> VCO to support a core-frequency of 550 MHz which is the minimum
> frequency required by the HVS at 4Kp60. The side effect is that if the
>
hdmi_enable_4k60=1 causes the firmware to select 3.3 GHz for the PLLC
VCO to support a core-frequency of 550 MHz which is the minimum
frequency required by the HVS at 4Kp60. The side effect is that if the
display clock requirements are lower than 4Kp60 then you will see
different core frequencies
On Thu, Oct 01, 2020 at 11:22:03AM +0200, Nicolas Saenz Julienne wrote:
> On Wed, 2020-09-30 at 09:38 -0700, Nathan Chancellor wrote:
> > On Wed, Sep 30, 2020 at 04:07:58PM +0200, Maxime Ripard wrote:
> > > Hi Nathan,
> > >
> > > On Tue, Sep 29, 2020 at 03:15:26PM -0700, Nathan Chancellor wrote:
On Wed, 2020-09-30 at 09:38 -0700, Nathan Chancellor wrote:
> On Wed, Sep 30, 2020 at 04:07:58PM +0200, Maxime Ripard wrote:
> > Hi Nathan,
> >
> > On Tue, Sep 29, 2020 at 03:15:26PM -0700, Nathan Chancellor wrote:
> > > On Thu, Sep 03, 2020 at 10:01:52AM +0200, Maxime Ripard wrote:
> > > > Now
On Thu, Oct 01, 2020 at 08:48:43AM +0200, Maxime Ripard wrote:
> Hi Stefan,
>
> On Wed, Sep 30, 2020 at 06:52:13PM +0200, Stefan Wahren wrote:
> > Am 30.09.20 um 18:38 schrieb Nathan Chancellor:
> > > On Wed, Sep 30, 2020 at 04:07:58PM +0200, Maxime Ripard wrote:
> > >> Hi Nathan,
> > >>
> > >>
Hi Stefan,
On Wed, Sep 30, 2020 at 06:52:13PM +0200, Stefan Wahren wrote:
> Am 30.09.20 um 18:38 schrieb Nathan Chancellor:
> > On Wed, Sep 30, 2020 at 04:07:58PM +0200, Maxime Ripard wrote:
> >> Hi Nathan,
> >>
> >> On Tue, Sep 29, 2020 at 03:15:26PM -0700, Nathan Chancellor wrote:
> >>> On Thu,
Hi,
Am 30.09.20 um 18:38 schrieb Nathan Chancellor:
> On Wed, Sep 30, 2020 at 04:07:58PM +0200, Maxime Ripard wrote:
>> Hi Nathan,
>>
>> On Tue, Sep 29, 2020 at 03:15:26PM -0700, Nathan Chancellor wrote:
>>> On Thu, Sep 03, 2020 at 10:01:52AM +0200, Maxime Ripard wrote:
Now that all the
On Wed, Sep 30, 2020 at 04:07:58PM +0200, Maxime Ripard wrote:
> Hi Nathan,
>
> On Tue, Sep 29, 2020 at 03:15:26PM -0700, Nathan Chancellor wrote:
> > On Thu, Sep 03, 2020 at 10:01:52AM +0200, Maxime Ripard wrote:
> > > Now that all the drivers have been adjusted for it, let's bring in the
> > >
Hi Nathan,
On Tue, Sep 29, 2020 at 03:15:26PM -0700, Nathan Chancellor wrote:
> On Thu, Sep 03, 2020 at 10:01:52AM +0200, Maxime Ripard wrote:
> > Now that all the drivers have been adjusted for it, let's bring in the
> > necessary device tree changes.
> >
> > The VEC and PV3 are left out for
On Thu, Sep 03, 2020 at 10:01:52AM +0200, Maxime Ripard wrote:
> Now that all the drivers have been adjusted for it, let's bring in the
> necessary device tree changes.
>
> The VEC and PV3 are left out for now, since it will require a more specific
> clock setup.
>
> Reviewed-by: Dave Stevenson
On Thu, 2020-09-03 at 10:01 +0200, Maxime Ripard wrote:
> Now that all the drivers have been adjusted for it, let's bring in the
> necessary device tree changes.
>
> The VEC and PV3 are left out for now, since it will require a more specific
> clock setup.
>
> Reviewed-by: Dave Stevenson
>
Hi Maxime,
On 9/3/20 5:01 PM, Maxime Ripard wrote:
> Now that all the drivers have been adjusted for it, let's bring in the
> necessary device tree changes.
>
> The VEC and PV3 are left out for now, since it will require a more specific
> clock setup.
>
> Reviewed-by: Dave Stevenson
> Tested-by:
Now that all the drivers have been adjusted for it, let's bring in the
necessary device tree changes.
The VEC and PV3 are left out for now, since it will require a more specific
clock setup.
Reviewed-by: Dave Stevenson
Tested-by: Chanwoo Choi
Tested-by: Hoegeun Kwon
Tested-by: Stefan Wahren
20 matches
Mail list logo
