This patchset consolidates several changes in the capacity and the usage
tracking of the CPU. It provides a frequency invariant metric of the usage of
CPUs and generally improves the accuracy of load/usage tracking in the
scheduler. The frequency invariant metric is the foundation required for the
From: Morten Rasmussen
Adds usage contribution tracking for group entities. Unlike
se->avg.load_avg_contrib, se->avg.utilization_avg_contrib for group
entities is the sum of se->avg.utilization_avg_contrib for all entities on the
group runqueue. It is _not_ influenced in any way by the task
On Mon, Jan 12, 2015 at 6:59 PM, Guenter Roeck wrote:
>> > Build failures, seen since next-20150109:
>> > m68k:allmodconfig
>> > powerpc:ppc6xx_defconfig
It looks like parisc is also suffering:
http://kisskb.ellerman.id.au/kisskb/buildresult/12343847/
>> > Due to:
>> >
In boards, the dm9000 chip's power and reset can be controlled by gpio.
It makes sense to add them to the dm9000 driver and let dt be used to
enable power and reset the phy.
Signed-off-by: Zubair Lutfullah Kakakhel
Signed-off-by: Paul Burton
---
V4 Reordered an error check. PTR_ERR inside
When a CPU is used to handle a lot of IRQs or some RT tasks, the remaining
capacity for CFS tasks can be significantly reduced. Once we detect such
situation by comparing cpu_capacity_orig and cpu_capacity, we trig an idle
load balance to check if it's worth moving its tasks on an idle CPU.
Once
> > +_require_scratch
> > +_require_xfs_io_command "fiemap"
> > +_require_xfs_io_command "finsert"
> > +_require_xfs_io_command "fcollapse"
> > +_do_die_on_error=y
>
> What is _do_die_on_error for? Seems like that's only relevant for using
> _do()?
>
> > +src=$SCRATCH_MNT/testfile
> >
Hi Suman,
On Wed, Jan 14, 2015 at 10:58 PM, Suman Anna wrote:
> This is an updated version of the hwspinlock dt support series,
> rebased onto v3.19-rc3 and mainly addresses the continued discussion
> on the need to maintain a list of registered spinlock banks [1].
> I have removed this patch as
> > }
> > do_collapse_range(offset, size);
> > break;
> > + case OP_INSERT_RANGE:
> > + TRIM_OFF(offset, file_size);
> > + TRIM_LEN(offset, size, maxfilelen - file_size);
>
> Ugh, I hit a crash down in do_insert_range() due to the
This new field cpu_capacity_orig reflects the original capacity of a CPU
before being altered by rt tasks and/or IRQ
The cpu_capacity_orig will be used:
- to detect when the capacity of a CPU has been noticeably reduced so we can
trig load balance to look for a CPU with better capacity. As an
The scheduler tries to compute how many tasks a group of CPUs can handle by
assuming that a task's load is SCHED_LOAD_SCALE and a CPU's capacity is
SCHED_CAPACITY_SCALE. group_capacity_factor divides the capacity of the group
by SCHED_LOAD_SCALE to estimate how many task can run in the group.
The average running time of RT tasks is used to estimate the remaining compute
capacity for CFS tasks. This remaining capacity is the original capacity scaled
down by a factor (aka scale_rt_capacity). This estimation of available capacity
must also be invariant with frequency scaling.
A frequency
Now that arch_scale_cpu_capacity has been introduced to scale the original
capacity, the arch_scale_freq_capacity is no longer used (it was
previously used by ARM arch). Remove arch_scale_freq_capacity from the
computation of cpu_capacity. The frequency invariance will be handled in the
load
Add new statistics which reflect the average time a task is running on the CPU
and the sum of these running time of the tasks on a runqueue. The latter is
named utilization_load_avg.
This patch is based on the usage metric that was proposed in the 1st
versions of the per-entity load tracking
This patch fix spelling typo in hda_controller.c.
Signed-off-by: Masanari Iida
---
sound/pci/hda/hda_controller.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/pci/hda/hda_controller.c b/sound/pci/hda/hda_controller.c
index 0cfc9c8..657b604 100644
---
Hi,
On 01/15/2015 07:24 AM, Felipe Balbi wrote:
>>> This is really, really odd. Register accesses are atomic, so the
>>> lock
>>> isn't really doing anything. Besides, you're calling
>>> dwc2_is_controller_alive() from within the IRQ handler, so IRQs are
On Wed, Jan 14, 2015 at 07:42:53PM +, Mitchel Humpherys wrote:
> On Tue, Dec 16 2014 at 01:45:27 AM, Will Deacon wrote:
> > On Mon, Dec 15, 2014 at 11:47:23PM +, Mitchel Humpherys wrote:
> >> From: Matt Wagantall
> >>
> >> It is sometimes necessary to poll a memory-mapped register until
Do not insert in send queue the skb that contains unknown Packet Control Byte
Signed-off-by: Anda-Maria Nicolae
---
Only compile tested, please have a look
drivers/nfc/st21nfcb/ndlc.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/nfc/st21nfcb/ndlc.c
This patch fix spelling typo in bt-sco.c
Signed-off-by: Masanari Iida
---
sound/soc/codecs/bt-sco.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/bt-sco.c b/sound/soc/codecs/bt-sco.c
index 5075bf0..e7238b8 100644
--- a/sound/soc/codecs/bt-sco.c
+++
* Borislav Petkov wrote:
> Hi guys,
>
> please queue this for 3.20.
>
> Thanks.
>
> ---
> The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:
>
> Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)
>
> are available in the git repository at:
>
>
* Luck, Tony wrote:
> > Nothing special this time, just an error messages improvement from Andy
> > and a cleanup from me.
>
> Also this APEI change that hasn't seen much commentary since Tomas Nowicki
> pointed
> out that v1 had cluttered up the APEI code with some x86-ism after he'd spent
Signed-off-by: Baruch Siach
---
.../bindings/interrupt-controller/digicolor-ic.txt | 22 ++
1 file changed, 22 insertions(+)
create mode 100644
Documentation/devicetree/bindings/interrupt-controller/digicolor-ic.txt
diff --git
This short series adds support for the Conexant CX92755 SoC interrupts
controller. This SoC is part of the Conexant Digicolor series of SoCs.
v3:
* Split from the "ARM: Conexant Digicolor CX92755 SoC support" series, as
these patches should go via the irqchip maintainers
* Use
Add interrupt controller driver to the Conexant CX92755 SoC, part of the
Digicolor SoCs series. Use the generic irq framework support. Use syscon to
access the system global UC_IRQ_CONTROL register.
Signed-off-by: Baruch Siach
---
drivers/irqchip/Makefile| 1 +
Le 14/01/2015 23:20, Xander Huff a écrit :
> Add spaces around arithmetic operators.
> Make a separate gem_ethtool_ops for the new statistics functions.
> Adjust new block comments to match the existing comments in macb.h.
I wouldn't have mixed the 3 modification in one patch.
More comments
* Paul E. McKenney wrote:
> On Wed, Jan 14, 2015 at 05:59:26PM -0800, Andy Lutomirski wrote:
> > Hi Ingo and Thomas,
> >
> > At Linus' suggestion, I'm trying out some maintainerish stuff for x86
> > entry code. Please consider pulling to an appropriate branch *after
> > Paul sends his RCU
Hi,
On 02-10-14 01:10, Luis Henriques wrote:
Label err_video_unreg in function usb_pwc_probe() is only used when
CONFIG_USB_PWC_INPUT_EVDEV is defined.
drivers/media/usb/pwc/pwc-if.c:1104:1: warning: label 'err_video_unreg' defined
but not used [-Wunused-label]
Signed-off-by: Luis Henriques
On 15/01/15 08:58, Christian Borntraeger wrote:
> ACCESS_ONCE does not work reliably on non-scalar types. For
> example gcc 4.6 and 4.7 might remove the volatile tag for such
> accesses during the SRA (scalar replacement of aggregates) step
> (https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58145)
>
On Mon, Jan 12, 2015 at 04:30:39PM -0500, Rik van Riel wrote:
> There is a subtle interaction between the logic introduced in commit
> e63da03639cc9e6e83b62e7ef8ffdbb92421416a, the way the load balancer
e63da03639cc ("sched/numa: Allow task switch if load imbalance improves")
I have the below
On Wed, 14 Jan 2015, Luis R. Rodriguez wrote:
> From: "Luis R. Rodriguez"
>
> This lets you build a kernel which can support xen dom0
> or xen guests by just using:
>
>make xenconfig
>
> on both x86 and arm64 kernels. This also splits out the
> options which are available currently to be
On Tue, Jan 13, 2015 at 07:33:57PM +, Luis Henriques wrote:
> On Mon, Jan 12, 2015 at 06:03:12PM +, Luis Henriques wrote:
> > 3.16.7-ckt4 -stable review patch. If anyone has any objections, please let
> > me know.
> >
>
> Hi Daniel and Chris,
>
> Thomas Voegtle (on Cc:) reported a
Hi Hans,
On 15/01/2015 09:46, Hans de Goede wrote:
> Hi,
>
> On 13-01-15 15:22, Gregory CLEMENT wrote:
>> The current implementation of the libahci allows using multiple PHYs
>> but not multiple regulators. This patch adds the support of multiple
>> regulators. Until now it was mandatory to have
On Thu, Jan 15, 2015 at 01:40:49PM +0900, jiwang wrote:
> Can we have a more generic fix to this issue?
> Or shall we set owner field for all machine drivers?
Ideally we should do both.
signature.asc
Description: Digital signature
Hi,
On 04-01-15 16:29, Antonio Ospite wrote:
On Mon, 29 Dec 2014 11:00:03 -0400
Joe Howse wrote:
Add support in the PS3 Eye driver for QVGA capture at higher
frame rates: 187, 150, and 137 FPS. This functionality is valuable
because the PS3 Eye is popular for computer vision projects and no
(2015/01/15 0:40), Steven Rostedt wrote:
> From: "Steven Rostedt (Red Hat)"
>
> Using just the filter for checking for trampolines or regs is not enough
> when updating the code against the records that represent all functions.
> Both the filter hash and the notrace hash need to be checked.
>
>
Hi, this is third attempt to fix Tegra20 suspend bug. First was to use other
PMC scratch register for tegra_resume() address store and second to use syscore
ops for PMC driver.
Thierry Reding proposed other solution: to use IRAM instead of PMC scratch
register. I prepared two implementation
Commit 7232398abc6a ("ARM: tegra: Convert PMC to a driver") changed
tegra_resume()
location storing from late to early and, as a result, broke suspend on Tegra20.
PMC scratch register 41 is used by tegra LP1 resume code for retrieving stored
physical memory address of common resume function and
Commit 7232398abc6a ("ARM: tegra: Convert PMC to a driver") changed
tegra_resume()
location storing from late to early and, as a result, broke suspend on Tegra20.
PMC scratch register 41 is used by tegra LP1 resume code for retrieving stored
physical memory address of common resume function and
On Wed, 2015-01-14 at 21:52 -0600, Chris Rorvick wrote:
> The descriptor member `bNumEndpoints' is plural.
I am afraid that is not a good idea. The name of a
member of a structure mentioned in the specification should
appear as it is used in the specification.
Regards
At Thu, 15 Jan 2015 19:22:19 +0900,
Masanari Iida wrote:
>
> This patch fix spelling typo in hda_controller.c.
>
> Signed-off-by: Masanari Iida
Applied, thanks.
Takashi
> ---
> sound/pci/hda/hda_controller.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git
On Mon, Jan 12, 2015 at 06:09:33PM +, Stefano Stabellini wrote:
> Hi all,
> I would like to request a backport of the following commit:
>
>
> commit a4dba130891271084344c12537731542ec77cb85
> Author: Stefano Stabellini
> Date: Fri Nov 21 11:07:39 2014 +
>
> xen/arm/arm64:
On Tue, Jan 13, 2015 at 06:33:38PM +0100, Eric Auger wrote:
> Introduce __KVM_HAVE_ARCH_INTC_INITIALIZED define and
> associated kvm_arch_intc_initialized function. This latter
> allows to test whether the virtual interrupt controller is initialized
> and ready to accept virtual IRQ injection. On
On Tue, Jan 13, 2015 at 06:33:39PM +0100, Eric Auger wrote:
> On arm/arm64 the VGIC is dynamically instantiated and it is useful
> to expose its state, especially for irqfd setup.
>
> This patch defines __KVM_HAVE_ARCH_INTC_INITIALIZED and
> implements kvm_arch_intc_initialized.
>
> The new
On Thu, Jan 15, 2015 at 07:29:28PM +0900, Masanari Iida wrote:
> This patch fix spelling typo in bt-sco.c
Applied, thanks.
signature.asc
Description: Digital signature
Am 15.01.2015 um 11:43 schrieb David Vrabel:
> On 15/01/15 08:58, Christian Borntraeger wrote:
>> ACCESS_ONCE does not work reliably on non-scalar types. For
>> example gcc 4.6 and 4.7 might remove the volatile tag for such
>> accesses during the SRA (scalar replacement of aggregates) step
>>
On 11.11.14 11:33, Ming Lei wrote:
> This patch converts the generic host controller driver
> into a more generic one, and basically don't need
> platform's pcibios support, and use DT based generic
> APIs to parse resource and remap IO port.
>
> This patch has been tested on both ARMv7 and ARMv8
This patch fixes the following problem: data transmission in direction
IN break unless the GSNPSID register access is done with spinlock held.
This issue occurs at least in Exynos4412 SoC, probably in many SoC's
from Exynos familly.
The problem is described here:
From: Micky Ching
This patchset including re-format some coding-style and add two new chip
rts524A and rts525A.
Micky Ching (10):
mfd: rtsx: replace TAB by SPC after #define
mfd: rtsx: place register address and values togather
mfd: rtsx: add debug info when access register failed
mfd:
From: Micky Ching
To enable/disable ASPM we should find LINK CONTROL register
in PCI config space. All old chip use 0x80 address, but new
chip may use another address, so we using pci_find_capability()
to get LINK CONTROL address.
rtsx_gops.c was removed, we consider to put some common
Hi Sander,
It really cost me some time to understand HVM, PVH, Dom0, PV and
read Xen interrupt related code:( Now I have basic understanding of
related staffs. The patch for previous issue is actually wrong and
I'm working on another fixes for it. I will handle this issue once
getting done
From: Micky Ching
update card drive settings, This setting can be used for rts5249
rts524A and rts525A.
Signed-off-by: Micky Ching
---
drivers/mfd/rts5249.c | 12 ++--
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/mfd/rts5249.c b/drivers/mfd/rts5249.c
index
From: Micky Ching
PETXCFG is defined at 0xFF03, the old 0xFE49 not used any more.
Signed-off-by: Micky Ching
---
drivers/mfd/rts5227.c| 6 ++
drivers/mfd/rts5249.c| 6 ++
include/linux/mfd/rtsx_pci.h | 2 +-
3 files changed, 5 insertions(+), 9 deletions(-)
diff --git
From: Micky Ching
pcr_dbg is a wrapper of dev_dbg, which can save some code,
and help to enable/disable debug message static.
Signed-off-by: Micky Ching
---
drivers/mfd/rtl8411.c | 11 +--
drivers/mfd/rts5209.c | 4 ++--
drivers/mfd/rts5227.c | 4 ++--
drivers/mfd/rts5229.c | 4
From: Micky Ching
add support for new chip rts525A.
Signed-off-by: Micky Ching
---
drivers/mfd/rts5249.c | 93 +-
drivers/mfd/rtsx_pcr.c | 13 +--
drivers/mfd/rtsx_pcr.h | 1 +
3 files changed, 103 insertions(+), 4 deletions(-)
diff --git
From: Micky Ching
update phy register value and using direct value instead of macros.
It is much easier to debug using constant value than a lot of macros.
We usually need compare the value directly to check the configure.
Signed-off-by: Micky Ching
---
drivers/mfd/rts5249.c | 46
From: Micky Ching
add support for new chip rts524A.
Signed-off-by: Micky Ching
---
drivers/mfd/rts5249.c| 112 +++
drivers/mfd/rtsx_pcr.c | 5 ++
drivers/mfd/rtsx_pcr.h | 4 ++
include/linux/mfd/rtsx_pci.h | 87
On Thu, Jan 15, 2015 at 10:29:08AM +0900, James Ban wrote:
> This is a patch for fixing unmatched of_node and adding gpio control.
That sounds like two separate changes to me...
> Optional properties:
> +- bucka-uses-gpio: BUCKA can be controlled by gpio.
> +- bucka-enable-platform-gpio:
From: Micky Ching
Re-format coding-style, using uniform SPC after "#define" keyword
instead of mixing using TAB and SPC.
Signed-off-by: Micky Ching
---
include/linux/mfd/rtsx_pci.h | 254 +--
1 file changed, 127 insertions(+), 127 deletions(-)
diff
From: Micky Ching
Add debug info when access register failed, this is useful for
debug.
Signed-off-by: Micky Ching
---
drivers/mfd/rtsx_pcr.c | 22 +-
include/linux/mfd/rtsx_pci.h | 2 ++
2 files changed, 19 insertions(+), 5 deletions(-)
diff --git
On Thu, Jan 15, 2015 at 11:07:12AM +1000, Ken Wilson wrote:
> I agree that we could support any sane chip select for a slave, since the
> slave addresses do need
> to be explicitly defined. I'm happy with whatever your preference is.
Just accepting anything seems easier both for users and in
Hi Linus,
Please pull fbdev fixes for 3.19:
The following changes since commit eaa27f34e91a14cdceed26ed6c6793ec1d186115:
linux 3.19-rc4 (2015-01-11 12:44:53 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux.git
tags/fbdev-fixes-3.19
From: Micky Ching
It is more readable to place register address and values define
togather. The values define add two leading space indicate belong
to the register address defined above.
Signed-off-by: Micky Ching
---
include/linux/mfd/rtsx_pci.h | 836
Hi Kirill,
On 01/14/2015 01:43 PM, Kirill Tkhai wrote:
[...]
Say we have a userspace task that evaluates and changes runtime
parameters for other tasks (basically what Luca is doing IIRC), and the
changes keep resetting the sleep time, the whole guarantee system comes
down, rendering the
On 12/01/15 21:21, Lad, Prabhakar wrote:
> this patch drops the unused function ssd1307fb_write_data().
>
> Signed-off-by: Lad, Prabhakar
> ---
> drivers/video/fbdev/ssd1307fb.c | 17 -
> 1 file changed, 17 deletions(-)
>
> diff --git a/drivers/video/fbdev/ssd1307fb.c
On 08/01/15 10:17, Lad, Prabhakar wrote:
> this patch sets the default height if its not found in DT.
>
> Signed-off-by: Lad, Prabhakar
> ---
> drivers/video/fbdev/ssd1307fb.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/video/fbdev/ssd1307fb.c
Which kernel did you see the write_room oops ? and I'll double check its
all fixed.
> >> + ublox_gps_i2c_client = client;
> >> + ublox_gps_filp = NULL;
> >> + ublox_gps_tty_port = NULL;
> >> + ublox_gps_is_open = false;
> >
> > There are some other i2c based tty drivers in the
Hi Linus,
The following changes since commit b1940cd21c0f4abdce101253e860feff547291b0:
Linux 3.19-rc3 (2015-01-05 17:05:20 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git for-linus
for you to fetch changes up to
On Wed, Jan 14, 2015 at 11:57:00PM +, Chanwoo Choi wrote:
> Hi Kukjin,
>
> On 01/15/2015 01:02 AM, Daniel Lezcano wrote:
> > On 01/14/2015 04:51 PM, Kukjin Kim wrote:
> >> On 01/14/15 14:33, Chanwoo Choi wrote:
> >>
> >> Hi,
> >>
> >> + Doug, Olof
> >>
> >>> This patch adds the support for
We introduce per-file freeze feature for unifying defrag ext4 and xfs
as first ingredient. We get the idea courtesy of Dave Chinner
(https://lkml.org/lkml/2014/7/14/759)
per-file freeze will be used to avoid that file is not modified while
userspace is doing the defrag.
This patch tries to
Most of our code has
struct foo {
}
Fix two instances where balloon is inconsistent.
Signed-off-by: Michael S. Tsirkin
---
include/uapi/linux/virtio_balloon.h | 3 +--
drivers/virtio/virtio_balloon.c | 3 +--
2 files changed, 2 insertions(+), 4 deletions(-)
diff --git
On 2015-01-14 17:32, Shuah Khan wrote:
> On 01/06/2015 12:43 PM, Shuah Khan wrote:
>> Add a new make target to install to install kernel selftests.
>> This new target will build and install selftests. kselftest
>> target now depends on kselftest_install and runs the generated
>> kselftest script
On Wed, 14 Jan 2015 11:12:58 -0700
Jason Gunthorpe wrote:
> On Wed, Jan 14, 2015 at 04:06:17PM +, One Thousand Gnomes wrote:
>
> > and I think you effectively have the user usage covered here for such
> > things. It much like GPIO pins - we can describe them but we can also
> > declare they
On 01/13/2015 11:47 AM, Thomas Gleixner wrote:
On Mon, 12 Jan 2015, Daniel Lezcano wrote:
On 01/12/2015 03:04 PM, Nicolas Ferre wrote:
Le 18/12/2014 15:05, Nicolas Ferre a écrit :
From: Sylvain Rochet
Waiting for PIT to stop counting takes a long time:
1/(Master clock/prescaler/PIVR)
=
The big issue here is:
of_property_read_u32(np, "flow_cntrl", (u32 *)_pdata->flow_cntrl);
"->flow_cntrl" is a char so when we write a 32 bit number to it then it
corrupts past the end of the char. It's probably hard to notice because
the struct has padding so the code works on little
Most of our code has
struct foo {
}
Fix two instances where blk is inconsistent.
Signed-off-by: Michael S. Tsirkin
---
drivers/block/virtio_blk.c | 6 ++
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index
> current->reclaim_state is only used to count the number of slab pages
> reclaimed by shrink_slab(). So instead of initializing it before we are
> going to call try_to_free_pages() or shrink_zone(), let's set in
> directly in shrink_slab().
>
> Note that after this patch
On Thu, Jan 15, 2015 at 11:36:17AM +, One Thousand Gnomes wrote:
> yes - there is a model for this in Linux already. Some of the audio
> subsystems have "firmware" files distributed which are actually a
> structured file that userspace parses to get a real set of firmware for
> the controller
From: Xander Huff
> Put #define comments into a single line.
Breaks the 80 char limit.
I suspect the definitions could be made to fit by judicial editing.
But that probably requires knowing exactly what the comments mean.
David
> Signed-off-by: Xander Huff
> ---
>
makes code look a bit prettier.
Signed-off-by: Michael S. Tsirkin
---
drivers/char/hw_random/virtio-rng.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/char/hw_random/virtio-rng.c
b/drivers/char/hw_random/virtio-rng.c
index 72295ea..3fa2f8a 100644
---
This patch remove unnecessary KERN_INFO in sync_serial.c
Signed-off-by: Masanari Iida
---
arch/cris/arch-v32/drivers/sync_serial.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/cris/arch-v32/drivers/sync_serial.c
b/arch/cris/arch-v32/drivers/sync_serial.c
index
Hi,
I'll do it but only if you review my other series :)
On 15/01/2015 at 12:41:27 +0100, Daniel Lezcano wrote :
> On 01/13/2015 11:47 AM, Thomas Gleixner wrote:
> >On Mon, 12 Jan 2015, Daniel Lezcano wrote:
> >
> >>On 01/12/2015 03:04 PM, Nicolas Ferre wrote:
> >>>Le 18/12/2014 15:05, Nicolas
On Mon, Dec 15, 2014 at 11:31:11AM +0800, Bo Shen wrote:
> +#ifdef CONFIG_OF
> +static enum wm8904_type wm8904_data = WM8904;
> +static enum wm8904_type wm8912_data = WM8912;
> +
> +static const struct of_device_id wm8904_of_match[] = {
> + {
> + .compatible = "wlf,wm8904",
> +
Hi Steven,
Thank you for fixing this bug!
(2015/01/15 0:40), Steven Rostedt wrote:
> From: "Steven Rostedt (Red Hat)"
>
> If the function graph tracer traces a jprobe callback, the system will
> crash. This can easily be demonstrated by compiling the jprobe
> sample module that is in the
Hi Andrew,
On 18/09/14 22:47, Andrew Bresticker wrote:
> Now that the GIC properly uses IRQ domains, kill off the per-platform
> routing tables that were used to make the GIC appear transparent.
>
> This includes:
> - removing the mapping tables and the support for applying them,
> - moving
> >> + case M_CMD_STATUS_LOST_ARB:
> >> + dev_err(dev->device, "lost bus arbitration\n");
> > I wouldn't dev_err that, only dev_dbg. I'm not sure how usual the errors
> > for the next two cases is, maybe degrade them to dev_dbg, too?
> >
> These errors are rare, and it's nice to keep
Changed to my private email address as I left Samsung.
Signed-off-by: Dmitry Kasatkin
---
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index ccb0fef..0ee6758 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4655,7 +4655,7 @@ F:
> > + iproc_i2c->msg = msg;
> Can it happen that iproc_i2c->msg still holds an uncompleted message
> here or is this serialized by the core? Wolfram? Either here something
We have per-adapter locks serializing transfers, if you mean that?
> > +static int bcm_iproc_i2c_cfg_speed(struct
(2015/01/14 22:54), Arnaldo Carvalho de Melo wrote:
> Em Wed, Jan 14, 2015 at 08:18:07PM +0900, Namhyung Kim escreveu:
>> The find_probe_trace_events_from_map() searches matching symbol from a
>> map (so from a backing dso). For uprobes, it'll create a new map (and
>> dso) and loads it using a
(2015/01/14 20:18), Namhyung Kim wrote:
> The commit dfef99cd0b2c ("perf probe: Use ref_reloc_sym based address
> instead of the symbol name") converts kprobes to use ref_reloc_sym
> (i.e. _stext) and offset instead of using symbol's name directly. So
> on my system, adding do_fork ends up with
How is your business?
This is Hellen from JRS Technology Co.,Ltd.
Good News,NOW the LED LENSER H14.2 Headlamp and LED LENSER P7.2
H14R.2 rechargeable headlamp are available.
And others LED LENSER flashlight models are all have competitive price.
For more products information.please contact us in
Changed to my private email address as I left Samsung.
Signed-off-by: Dmitry Kasatkin
---
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/MAINTAINERS b/MAINTAINERS
index ccb0fef..0ee6758 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4655,7 +4655,7 @@ F:
(2015/01/15 8:48), Namhyung Kim wrote:
> When a dso contains multiple symbols which have same name, current
> dso__find_symbol_by_name() only finds an one of them and there's no way
> to get the all symbols without going through the rbtree.
>
> So add the new 'from' argument to
This drivers -> this driver.
Signed-off-by: Michael S. Tsirkin
---
drivers/virtio/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index 00b2286..8286b63 100644
--- a/drivers/virtio/Kconfig
+++ b/drivers/virtio/Kconfig
The ABI *is* stable, and has been for a while now.
Drop Kconfig warning saying that it's not guaranteed
to work.
Signed-off-by: Michael S. Tsirkin
---
drivers/virtio/Kconfig | 3 ---
1 file changed, 3 deletions(-)
diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
index
Hello,
Sorry for the ugly typo in MAINTAINERS.
- Dmitry
Dmitry Kasatkin (1):
MAINTAINERS: email update
MAINTAINERS | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
(2015/01/15 8:48), Namhyung Kim wrote:
> The find_probe_trace_events_from_map() searches matching symbol from a
> map (so from a backing dso). For uprobes, it'll create a new map (and
> dso) and loads it using a filter. It's a little bit inefficient in that
> it'll read out the symbol table
(2015/01/15 8:48), Namhyung Kim wrote:
> The commit dfef99cd0b2c ("perf probe: Use ref_reloc_sym based address
> instead of the symbol name") converts kprobes to use ref_reloc_sym
> (i.e. _stext) and offset instead of using symbol's name directly. So
> on my system, adding do_fork ends up with
On 01/15/2015 12:52 PM, Alexandre Belloni wrote:
Hi,
I'll do it but only if you review my other series :)
deal ! ;)
-- Daniel
On 15/01/2015 at 12:41:27 +0100, Daniel Lezcano wrote :
On 01/13/2015 11:47 AM, Thomas Gleixner wrote:
On Mon, 12 Jan 2015, Daniel Lezcano wrote:
On
On Thu, Jan 15, 2015 at 12:23:43PM +0100, Luca Abeni wrote:
> There are some parts of the patch that I do not understand (for example:
> if I understand well, if the task is not throttled you set dl_new to 1...
> And if it is throttled you change its current runtime and scheduling
> deadline...
>
On Thu, Jan 15, 2015 at 07:14:26PM +0900, Namjae Jeon wrote:
>
> > > +_require_scratch
> > > +_require_xfs_io_command "fiemap"
> > > +_require_xfs_io_command "finsert"
> > > +_require_xfs_io_command "fcollapse"
> > > +_do_die_on_error=y
> >
> > What is _do_die_on_error for? Seems like that's
I'm really sorry. I've used the wrong source. I make v4.
Regards,
Bart
On 01/14/2015 06:06 PM, Stephen Warren wrote:
> On 01/14/2015 02:18 AM, Bart Tanghe wrote:
>> To probe the bcm2835-pwm driver properly, this dts bindings has to be added
>> to the bcm2835 dtsi file.
>> In expectation of a
1001 - 1100 of 1820 matches
Mail list logo
