On Thu, Sep 20, 2018 at 1:48 AM Trent Piepho wrote:
> If driver_override was set when a device was released the string would
> not be kfree'ed in amba_device_release and thus leaked when the amba
> device was freed.
>
> Cc: Russell King
> Cc: Todd Kjos
> Cc: Geert Uytterhoeven
> Cc: Greg Kroah-
add uart dma bindings
Signed-off-by: Long Cheng
---
.../devicetree/bindings/dma/8250_mtk_dma.txt | 32
1 file changed, 32 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/8250_mtk_dma.txt
diff --git a/Documentation/devicetree/bindings/dma/8250
In Mediatek SOCs, the uart can support DMA function.
Base on DMA engine formwork, we add the DMA code to support uart. And put the
code under drivers/dma.
This series contains document bindings, Kconfig to control the function enable
or not,
device tree including interrupt and dma device node, t
In DMA engine framework, add 8250 mtk dma to support it.
Signed-off-by: Long Cheng
---
drivers/dma/8250_mtk_dma.c | 1049
drivers/dma/Kconfig| 11 +
drivers/dma/Makefile |1 +
3 files changed, 1061 insertions(+)
create mode 100644
Modify uart register to support DMA function.
Signed-off-by: Long Cheng
---
drivers/tty/serial/8250/8250_mtk.c | 211 +++-
1 file changed, 210 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/8250/8250_mtk.c
b/drivers/tty/serial/8250/8250_mtk.c
inde
1. add uart APDMA controller device node
2. add uart 0/1/2/3 DMA function
3. uart0 is console, So disable DMA
4. enable uart2 port to test DMA function.
Signed-off-by: Long Cheng
---
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 50 +
1 file changed, 50 insertions(+)
The current code fails to run on amd64 because of hardcoded reference to
i386
Signed-off-by: Ritesh Raj Sarraf
---
arch/um/drivers/port_user.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c
index 9a8e1b64c22e..5f56d11
Hi Akash,
On Wednesday 19 September 2018 08:13 PM, Akash Gajjar wrote:
> This patch basic node support for Rockpro64 board and make it able to bring
> up.
>
Please modify the commit message to make it more clear.
> Peripheral Works
> - SDIO, Sdcard
> - USB 2.0, 3.0
> - Leds
>
> Not working:
>
From: Vijay Viswanath
Some sdhci-msm controllers require that voltage switching be done after
the HW is ready for it. The HW informs its readiness through power irq.
The voltage switching should happen only then.
Use the quirk for internal voltage switching and then control the
voltage switching
From: Vijay Viswanath
Some controllers can have internal mechanism to inform the SW that it
is ready for voltage switching. For such controllers, changing voltage
before the HW is ready can result in various issues.
During setup/cleanup of host, check whether regulator enable/disable
was already
From: Vijay Viswanath
The load a particular sdhc controller should request from a regulator
is device specific and hence each device should individually vote for
the required load.
Signed-off-by: Vijay Viswanath
Signed-off-by: Veerabhadrarao Badiganti
---
Documentation/devicetree/bindings/mmc
Fixes the following sparse warning:
drivers/platform/goldfish/goldfish_pipe.c:214:26: warning:
symbol 'goldfish_pipe_dev' was not declared. Should it be static?
Signed-off-by: Wei Yongjun
---
drivers/platform/goldfish/goldfish_pipe.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff
On 19.09.2018 16:00, Miguel Ojeda wrote:
> On Wed, Sep 19, 2018 at 11:14 PM, Greg Kroah-Hartman
> wrote:
>> On Tue, Sep 18, 2018 at 08:56:04PM +0200, Miguel Ojeda wrote:
>>> Hi Greg,
>>>
>>
>>> Since Linus/Andrew/you
>>> didn't comment on whether you wanted or not this for 4.19, we are
>>> assumin
On Thu, Sep 20, 2018 at 01:39:31PM +0800, Guo Ren wrote:
> +struct clocksource csky_clocksource = {
> + .name = "csky",
> + .rating = 400,
> + .mask = CLOCKSOURCE_MASK(32),
> + .flags = CLOCK_SOURCE_IS_CONTINUOUS,
> + .read = clksrc_read,
> +};
> +
> +#define CPUHP_AP_CSK
Hi Marc,
On Tue, Sep 18, 2018 at 04:41:22PM +0100, Marc Zyngier wrote:
> > +#define IPI_IRQ15
> > +
>
> It feels really bizarre that the function that maps the interrupt is
> specific to the interrupt controller, and yet the interrupt number is
> defined at the architecture level. I'd expect
Similar to bus_find_device_by_name, but finds the device having a
specific of_node.
Signed-off-by: Silesh C V
---
drivers/base/bus.c | 21 +
include/linux/device.h | 3 +++
2 files changed, 24 insertions(+)
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 8bfd
- Dt-bindings doc about C-SKY Multi-processors interrupt controller.
Signed-off-by: Guo Ren
---
.../bindings/interrupt-controller/csky,mpintc.txt | 40 ++
1 file changed, 40 insertions(+)
create mode 100644
Documentation/devicetree/bindings/interrupt-controller/csky,mpint
- Dt-bingdings doc for C-SKY SMP system setting.
Signed-off-by: Guo Ren
---
.../devicetree/bindings/timer/csky,mptimer.txt | 46 ++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/csky,mptimer.txt
diff --git a/Documentation/d
- Add irq_mapping return check
- Move IPI_IRQ into irq-driver
- remove irq_mapping from smp.c to irq-driver
- Add set_ipi_irq_mapping api to irq-driver
- update asm/smp.h
Signed-off-by: Guo Ren
---
arch/csky/include/asm/smp.h | 4 +++-
arch/csky/kernel/smp.c | 27 +++--
- Irq-csky-mpintc is C-SKY smp system interrupt controller and it
could support 16 soft irqs, 16 private irqs, and 992 max common
irqs.
Changelog:
- Move IPI_IRQ into the driver
- Remove irq_set_default_host() and use set_ipi_irq_mapping()
- Change name with upstream feed-back
- Change
Because I've sent to Stephen Roth with the linux-4.19-rc3 git-tree for
linux-next, I shouldn't rebase any more.
https://github.com/c-sky/csky-linux.git#linux-next
This patchset include mptimer and mpintc drivers and fixup:
- Fixup smp IPI's problems found by Marc Zyngier
- Add irq-csky-mpintc.c
This timer is used by SMP system and use mfcr/mtcr instruction
to access the regs.
Changelog:
- Add CPUHP_AP_CSKY_TIMER_STARTING in cpuhotplug.h
- Support csky mp timer alpha version.
- Just use low-counter with 32bit width as clocksource.
- Coding convention with upstream feed-back.
Signed-o
ref: https://lkml.org/lkml/2018/5/18/1068
map for_cpu for_device unmap
TO_DEV writeback nonewriteback none
TO_CPU invalidate invalidate* invalidate invalidate*
BIDIR writeback invalidate writeback invalidat
On Wed, Sep 19, 2018 at 4:50 AM Timur Tabi wrote:
> On 9/18/18 11:04 PM, Ricardo Ribalda Delgado wrote:
> > And should't that be tacked in qcom hardware with something like:
> >
> > if (!priv->initialized)
> > return INPUT;
> >
> > if you or Timur point me to the harware that was crashing I wo
On Wed, Sep 19, 2018 at 06:09:38PM -0700, Bjorn Andersson wrote:
> When freeing the fw_priv the item is taken off the list. This causes an
> oops in the FW_OPT_NOCACHE case as the list object is not initialized.
>
> Make sure to initialize the list object regardless of this flag.
>
> Fixes: 422b3
module.h has duplicated include. hence just remove
redundant include file.
Signed-off-by: zhong jiang
---
drivers/misc/genwqe/card_base.c | 1 -
drivers/misc/genwqe/card_ddcb.c | 1 -
2 files changed, 2 deletions(-)
diff --git a/drivers/misc/genwqe/card_base.c b/drivers/misc/genwqe/card_base.c
delay.h and dma-mapping.h have duplicated include. hence just remove
redundant file.
Signed-off-by: zhong jiang
---
drivers/misc/genwqe/card_utils.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/misc/genwqe/card_utils.c b/drivers/misc/genwqe/card_utils.c
index f0961ec..3fcb9a2 100
Quoting Wolfram Sang (2018-09-19 13:45:28)
>
> > But now when I try to use it I'm not exicted when the buffer is bounced
> > but we fail to map the buffer with the DMA APIs. For an I2C_M_RD
>
> Yes, this was reported before and the function to unmap looks different
> now as of v4.19-rc2...
>
> >
Hi all,
Changes since 20180919:
Dropped trees: xarray, ida (temporarily)
The input-current tree lost its build failure.
I still disabled building some samples in the vfs tree.
Non-merge commits (relative to Linus' tree): 4279
4792 files changed, 166265 insertions(+), 93138 dele
On Wed, Sep 19, 2018 at 08:32:29PM -0700, Nathan Chancellor wrote:
> Clang warns when more than one set of parentheses are used in single
> conditional statements.
>
> drivers/infiniband/hw/mlx4/mcg.c:676:16: warning: equality comparison
> with extraneous parentheses [-Wparentheses-equality]
>
Hi Tudor,
> -Original Message-
> From: Tudor Ambarus [mailto:tudor.amba...@microchip.com]
> Sent: Wednesday, September 19, 2018 10:00 PM
> To: Yogesh Narayan Gaur ; linux-
> m...@lists.infradead.org; linux-...@vger.kernel.org
> Cc: boris.brezil...@bootlin.com; linux-kernel@vger.kernel.org;
Hi Olof,
I expected not to participate to this boring discussion, but I think
I need to make a point below :
On Thu, Sep 20, 2018 at 02:16:40AM +0100, Olof Johansson wrote:
> Another common counter argument is that the code of conduct is
> imposing what's appropriate thoughts and opinions on ever
The grant is not supported by consideration.
It dispenses only largess, and asks for no recompense.
It is a bare license.
Thus it can be revoked by the grantor at any time.
His act of grace bestowed, and his act of propriety can rescind.
The free software world is held up muchly by a gentleman's
The grant is not supported by consideration.
It dispenses only largess, and asks for no recompense.
It is a bare license.
Thus it can be revoked by the grantor at any time.
His act of grace bestowed, and his act of propriety can rescind.
The free software world is held up muchly by a gentleman's
Clang warns when more than one set of parentheses are used in single
conditional statements.
drivers/infiniband/hw/mlx4/mcg.c:676:16: warning: equality comparison
with extraneous parentheses [-Wparentheses-equality]
if ((method == IB_MGMT_METHOD_GET_RESP)) {
Clang warns when more than one set of parentheses are used in single
conditional statements.
drivers/infiniband/hw/nes/nes_hw.c:1446:27: warning: equality comparison
with extraneous parentheses [-Wparentheses-equality]
} while ((temp_phy_data2 == temp_phy_data));
Hi Stefan,
I love your patch! Perhaps something to improve:
[auto build test WARNING on tegra/for-next]
[also build test WARNING on v4.19-rc4 next-20180919]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system]
url:
https://github.com/0day-ci
On Thu, Sep 20, 2018 at 02:16:40AM +0100, Olof Johansson wrote:
> > But there are too many ways this can go wrong, maybe not now or next
> > week but in five or ten years, when maybe a different kind of person
> > is on the TAB, or maybe external pressure is brought to bear on TAB
> > members.
>
From: Tomer Tayar
[ Upstream commit eaa50fc59e5841910987e90b0438b2643041f508 ]
The MFW manages an internal lock to prevent concurrent hardware
(de)initialization of different PFs.
This, together with the busy-waiting for the MFW's responses for commands,
might lead to a deadlock during concurren
From: Tomer Tayar
[ Upstream commit f00d25f3154b676fcea4502a25b94bd7f142ca74 ]
The MFW might be reset and re-update its shared memory.
Upon the detection of such a reset the driver rereads this memory, but it
has to wait till the data is valid.
This patch adds the missing wait for a data ready i
Remove duplicated include linux/fsl/mc.h
Signed-off-by: YueHaibing
---
drivers/bus/fsl-mc/dpbp.c | 1 -
drivers/bus/fsl-mc/dpcon.c | 1 -
2 files changed, 2 deletions(-)
diff --git a/drivers/bus/fsl-mc/dpbp.c b/drivers/bus/fsl-mc/dpbp.c
index 17e3c5d..9003cd3 100644
--- a/drivers/bus/fsl-mc/dp
From: Tony Lindgren
[ Upstream commit 0ef8e3bb974af56346b34393e643d491d9141c66 ]
We can have the interconnect target module control registers pretty
much anywhere within the module range. The current code attempts an
incomplete optimization of the ioremap size but does it wrong and
it only works
From: Anson Huang
[ Upstream commit 152395fd03d4ce1e535a75cdbf58105e50587611 ]
When thermal zone is in passive mode, disabling its mode from
sysfs is NOT taking effect at all, it is still polling the
temperature of the disabled thermal zone and handling all thermal
trips, it makes user confused.
From: John Fastabend
[ Upstream commit 9b2e0388bec8ec5427403e23faff3b58dd1c3200 ]
When sockmap code is using the stream parser it also handles the write
space events in order to handle the case where (a) verdict redirects
skb to another socket and (b) the sockmap then sends the skb but due
to me
From: Christian König
[ Upstream commit 8604ffcbf04f8f4f3f55a9e46e5ff948b2ed4290 ]
We need to figure out the address after validating the BO, not before.
Signed-off-by: Christian König
Reviewed-by: Felix Kuehling
Reviewed-by: Junwei Zhang
Reviewed-by: Huang Rui
Signed-off-by: Alex Deucher
From: John Fastabend
[ Upstream commit 67db7cd249e71f64346f481b629724376d063e08 ]
Currently, the lower protocols sk_write_space handler is not called if
TLS is sending a scatterlist via tls_push_sg. However, normally
tls_push_sg calls do_tcp_sendpage, which may be under memory pressure,
that in
From: Emily Deng
[ Upstream commit 2f40c6eac74a2a60921cdec9e9a8a57e88e31434 ]
SWDEV-146499: hang during multi vulkan process testing
cause:
the second frame's PREAMBLE_IB have clear-state
and LOAD actions, those actions ruin the pipeline
that is still doing process in the previous frame's
work-
From: Kevin Yang
[ Upstream commit fb99886224294b2291d267da41395022fa4200e2 ]
This patch add a helper function bbr_check_probe_rtt_done() to
1. check the condition to see if bbr should exit probe_rtt mode;
2. process the logic of exiting probe_rtt mode.
Fixes: 0f8782ea1497 ("tcp_bbr: add BB
From: Samuel Mendoza-Jonas
[ Upstream commit 3d0371b313b84ba7c16ebf2526a7a34f1c57b19e ]
The ncsi_pkg_info_all_nl() .dumpit handler is missing the NLM_F_MULTI
flag, causing additional package information after the first to be lost.
Also fixup a sanity check in ncsi_write_package_info() to reject
From: Huazhong Tan
[ Upstream commit 3ed614dce3ca9912d22be215ff0f11104b69fe62 ]
When enable the config item "CONFIG_ARM64_64K_PAGES", the size of PAGE_SIZE
is 65536(64K). But the type of length and page_offset are u16, they will
overflow. So change them to u32.
Fixes: 6fe6611ff275 ("net: add H
From: Sebastian Basierski
[ Upstream commit 939b701ad63314f5aa90dcd3d866f73954945209 ]
Since VFLR doesn't clear VFMBMEM (VF Mailbox Memory)
and is not re-enabling queues correctly we should fix
this behavior.
Signed-off-by: Sebastian Basierski
Tested-by: Andrew Bowers
Signed-off-by: Jeff Kirs
From: Anirudh Venkataramanan
[ Upstream commit c7f2c42b80ed6009f44e355aefc1e40db9485a9d ]
1) When ice_ena_msix_range() fails to reserve vectors, a devm_kfree()
warning was seen in the error flow path. So check pf->irq_tracker
before use in ice_clear_interrupt_scheme().
2) In ice_vsi_cfg()
From: Bo Chen
[ Upstream commit ee400a3f1bfe7004a3e14b81c38ccc5583c26295 ]
In 'e1000_set_ringparam()', the tx_ring and rx_ring are updated with new value
and the old tx/rx rings are freed only when the device is up. There are resource
leaks on old tx/rx rings when the device is not up. This bug
From: Rex Zhu
[ Upstream commit 2ab4d0e74256fc49b7b270f63c1d1e47c2455abc ]
For SI/Kv, the power state is managed by function
amdgpu_pm_compute_clocks.
when dpm enabled, we should call amdgpu_pm_compute_clocks
to update current power state instand of set boot state.
this change can fix the oops
From: Jesse Brandeburg
[ Upstream commit dab0588fb616c1774bbf108eab1749dda4ac6942 ]
In ice_vsi_setup_[tx|rx]_rings, err is uninitialized which can result in
a garbage value return to the caller. Fix that.
Signed-off-by: Jesse Brandeburg
Signed-off-by: Anirudh Venkataramanan
Tested-by: Tony Br
From: Quentin Monnet
[ Upstream commit 785e76d7a2051a9e28b9134d5388a45b16f5eb72 ]
When command line parsing fails in the while loop in do_event_pipe()
because the number of arguments is incorrect or because the keyword is
unknown, an error message is displayed, but bpftool remains stuck in
the l
From: Srikanth Jampala
[ Upstream commit 3d7c82060d1fe65bde4023aac41a0b1bd7718e07 ]
Earlier used to post the current command without checking queue full
after backlog submissions. So, post the current command only after
confirming the space in queue after backlog submissions.
Mai
From: Emily Deng
[ Upstream commit 6ddd9769db4fc11a98bd7e58be1764e47fdb8384 ]
Fix the VMC page fault when the running sequence is as below:
1.amdgpu_gem_create_ioctl
2.ttm_bo_swapout->amdgpu_vm_bo_invalidate, as not called
amdgpu_vm_bo_base_init, so won't called
list_add_tail(&base->bo_list, &bo
From: Bo Chen
[ Upstream commit cf1acec008f8d7761aa3fd7c4bca7e17b2d2512d ]
When the device is not up, the call to 'e1000_up()' from the error handling path
of 'e1000_set_ringparam()' causes a kernel oops with a null-pointer
dereference. The null-pointer dereference is triggered in function
'e100
From: Martyna Szapar
[ Upstream commit fa38e30ac73fbb01d7e5d0fd1b12d412fa3ac3ee ]
If interface is connected to switch port configured for DCB there are
TX timeouts when bringing up interface. Problem started appearing after
adding in i40e driver code mqprio hardware offload mode. In function
i40
From: Srikanth Jampala
[ Upstream commit 3d7c82060d1fe65bde4023aac41a0b1bd7718e07 ]
Earlier used to post the current command without checking queue full
after backlog submissions. So, post the current command only after
confirming the space in queue after backlog submissions.
Mai
From: Tony Lindgren
[ Upstream commit 2d59bb602314a4b2593fde267734266b5e872dd0 ]
Otherwise we can get the following errors occasionally on some devices:
mmc1: tried to HW reset card, got error -110
mmcblk1: error -110 requesting status
mmcblk1: recovery failed!
print_req_error: I/O error, dev m
From: Jacob Keller
[ Upstream commit 07f3701387dcab3a4fb0166098fb2754a1b927e1 ]
Commit 9b10df596bd4 ("i40e: use WARN_ONCE to replace the commented
BUG_ON size check") introduced a warning check to make sure
that the size of the stat strings was always the expected value. This
code accidentally i
From: Lothar Felten
[ Upstream commit 3ad867001c91657c46dcf6656d52eb6080286fd5 ]
fix the sysfs shunt resistor read access: return the shunt resistor
value, not the calibration register contents.
update email address
Signed-off-by: Lothar Felten
Signed-off-by: Guenter Roeck
Signed-off-by: Sas
From: Rex Zhu
[ Upstream commit 2ab4d0e74256fc49b7b270f63c1d1e47c2455abc ]
For SI/Kv, the power state is managed by function
amdgpu_pm_compute_clocks.
when dpm enabled, we should call amdgpu_pm_compute_clocks
to update current power state instand of set boot state.
this change can fix the oops
From: Mika Westerberg
[ Upstream commit 7fd6d98b89f382d414e1db528e29a67bbd749457 ]
Commit 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict
with PCI BAR") made it possible for AML code to access SMBus I/O ports
by installing custom SystemIO OpRegion handler and blocking i80i driv
From: Rex Zhu
[ Upstream commit 8ef23364b654d44244400d79988e677e504b21ba ]
This is required by gfx hw and can fix the rlc hang when
do s3 stree test on Cz/St.
Reviewed-by: Alex Deucher
Signed-off-by: Hang Zhou
Signed-off-by: Rex Zhu
Signed-off-by: Alex Deucher
Signed-off-by: Sasha Levin
--
From: Bo Chen
[ Upstream commit ee400a3f1bfe7004a3e14b81c38ccc5583c26295 ]
In 'e1000_set_ringparam()', the tx_ring and rx_ring are updated with new value
and the old tx/rx rings are freed only when the device is up. There are resource
leaks on old tx/rx rings when the device is not up. This bug
From: Leonard Crestez
[ Upstream commit 538d6e9d597584e80514698e24321645debde78f ]
This reverts commit 1c86c9dd82f859b474474a7fee0d5195da2c9c1d.
That commit followed the reference manual but unfortunately the imx7d
manual is incorrect.
Tested with ath9k pcie card and confirmed internally.
Sig
From: Huazhong Tan
[ Upstream commit b1ccd4c0ab6ef499f47dd84ed4920502a7147bba ]
skb->truesize is not meant to be tracking amount of used bytes in a skb,
but amount of reserved/consumed bytes in memory.
For instance, if we use a single byte in last page fragment, we have to
account the full size
From: Tomer Tayar
[ Upstream commit f00d25f3154b676fcea4502a25b94bd7f142ca74 ]
The MFW might be reset and re-update its shared memory.
Upon the detection of such a reset the driver rereads this memory, but it
has to wait till the data is valid.
This patch adds the missing wait for a data ready i
From: Randy Dunlap
[ Upstream commit ff924c5a1ec7548825cc2d07980b03be4224ffac ]
Fix the section mismatch warning in arch/x86/mm/pti.c:
WARNING: vmlinux.o(.text+0x6972a): Section mismatch in reference from the
function pti_clone_pgtable() to the function
.init.text:pti_user_pagetable_walk_pte(
From: Linus Walleij
[ Upstream commit 46cb52ad414ac829680d0bb8cc7090ac2b577ca7 ]
The DMA is broken on this specific device for some unknown
reason (probably badly designed or plain broken interface
electronics) and will only work with PIO. Other users of
the same hardware does not have this prob
From: James Smart
[ Upstream commit afd299ca996929f4f98ac20da0044c0cdc124879 ]
When a targetport is removed from the config, fcloop will avoid calling
the LS done() routine thinking the targetport is gone. This leaves the
initiator reset/reconnect hanging as it waits for a status on the
Create_A
We met a kernel panic when enabling earlycon, which is due to the fixmap
address of earlycon is not statically setup.
Currently the static fixmap setup in head_64.S only covers 2M virtual
address space, while it actually could be in 4M space with different
kernel configurations.
So increase the s
From: Dan Carpenter
[ Upstream commit f196dec6d50abb2e65fb54a0621b2f1b4d922995 ]
The adt7475_read_word() function was meant to return negative error
codes on failure.
Signed-off-by: Dan Carpenter
Reviewed-by: Tokunori Ikegami
Signed-off-by: Guenter Roeck
Signed-off-by: Sasha Levin
---
driv
From: Tomer Tayar
[ Upstream commit b310974e041913231b6e3d5d475d4df55c312301 ]
Keep sending mailbox commands to the MFW when it is not responsive ends up
with a redundant amount of timeout expiries.
This patch prints the MCP status on the first command which is not
responded, and blocks the foll
From: Tony Lindgren
[ Upstream commit 2d59bb602314a4b2593fde267734266b5e872dd0 ]
Otherwise we can get the following errors occasionally on some devices:
mmc1: tried to HW reset card, got error -110
mmcblk1: error -110 requesting status
mmcblk1: recovery failed!
print_req_error: I/O error, dev m
From: Tomer Tayar
[ Upstream commit f00d25f3154b676fcea4502a25b94bd7f142ca74 ]
The MFW might be reset and re-update its shared memory.
Upon the detection of such a reset the driver rereads this memory, but it
has to wait till the data is valid.
This patch adds the missing wait for a data ready i
From: Tomer Tayar
[ Upstream commit 76271809f49056f079e202bf6513d17b0d6dd34d ]
Successive iterations of halting and resuming the management chip (MCP)
might fail, since currently the driver doesn't wait for these operations to
actually take place.
This patch prevents the driver from moving forwa
From: Akshu Agrawal
[ Upstream commit bded6c03e398dc6e862dc8301fb9a60175740653 ]
System clk provided in ST soc can be set to:
48Mhz, non-spread
25Mhz, spread
To get accurate rate, we need it to set it at non-spread
option which is 48Mhz.
Signed-off-by: Akshu Agrawal
Reviewed-by: Daniel Kurtz
From: Anson Huang
[ Upstream commit 152395fd03d4ce1e535a75cdbf58105e50587611 ]
When thermal zone is in passive mode, disabling its mode from
sysfs is NOT taking effect at all, it is still polling the
temperature of the disabled thermal zone and handling all thermal
trips, it makes user confused.
From: Randy Dunlap
[ Upstream commit ff924c5a1ec7548825cc2d07980b03be4224ffac ]
Fix the section mismatch warning in arch/x86/mm/pti.c:
WARNING: vmlinux.o(.text+0x6972a): Section mismatch in reference from the
function pti_clone_pgtable() to the function
.init.text:pti_user_pagetable_walk_pte(
From: Mika Westerberg
[ Upstream commit 7fd6d98b89f382d414e1db528e29a67bbd749457 ]
Commit 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict
with PCI BAR") made it possible for AML code to access SMBus I/O ports
by installing custom SystemIO OpRegion handler and blocking i80i driv
From: Bo Chen
[ Upstream commit cf1acec008f8d7761aa3fd7c4bca7e17b2d2512d ]
When the device is not up, the call to 'e1000_up()' from the error handling path
of 'e1000_set_ringparam()' causes a kernel oops with a null-pointer
dereference. The null-pointer dereference is triggered in function
'e100
From: Tomer Tayar
[ Upstream commit eaa50fc59e5841910987e90b0438b2643041f508 ]
The MFW manages an internal lock to prevent concurrent hardware
(de)initialization of different PFs.
This, together with the busy-waiting for the MFW's responses for commands,
might lead to a deadlock during concurren
From: Marc Zyngier
[ Upstream commit 1d8f574708a3fb6f18c85486d0c5217df893c0cf ]
An unfortunate consequence of having a strong typing for the input
values to the SMC call is that it also affects the type of the
return values, limiting r0 to 32 bits and r{1,2,3} to whatever
was passed as an input.
From: Dan Carpenter
[ Upstream commit f196dec6d50abb2e65fb54a0621b2f1b4d922995 ]
The adt7475_read_word() function was meant to return negative error
codes on failure.
Signed-off-by: Dan Carpenter
Reviewed-by: Tokunori Ikegami
Signed-off-by: Guenter Roeck
Signed-off-by: Sasha Levin
---
driv
From: John Fastabend
[ Upstream commit 67db7cd249e71f64346f481b629724376d063e08 ]
Currently, the lower protocols sk_write_space handler is not called if
TLS is sending a scatterlist via tls_push_sg. However, normally
tls_push_sg calls do_tcp_sendpage, which may be under memory pressure,
that in
From: Huazhong Tan
[ Upstream commit 3ed614dce3ca9912d22be215ff0f11104b69fe62 ]
When enable the config item "CONFIG_ARM64_64K_PAGES", the size of PAGE_SIZE
is 65536(64K). But the type of length and page_offset are u16, they will
overflow. So change them to u32.
Fixes: 6fe6611ff275 ("net: add H
From: Anson Huang
[ Upstream commit 152395fd03d4ce1e535a75cdbf58105e50587611 ]
When thermal zone is in passive mode, disabling its mode from
sysfs is NOT taking effect at all, it is still polling the
temperature of the disabled thermal zone and handling all thermal
trips, it makes user confused.
From: Eric Sandeen
[ Upstream commit 09a4e0be5826aa66c4ce9954841f110ffe63ef4f ]
The largest block size supported by isofs is ISOFS_BLOCK_SIZE (2048), but
isofs_fill_super calls sb_min_blocksize and sets the blocksize to the
device's logical block size if it's larger than what we ended up with af
From: Anirudh Venkataramanan
[ Upstream commit 4381147df9098706caa5cf9fda37e53b2fe4871f ]
This patch fixes the following smatch errors:
1) Fix "odd binop '0x0 & 0xc'" when performing the bitwise-and with a
constant value of zero (ICE_AQC_GSET_RSS_LUT_TABLE_SIZE_128_FLAG).
Remove a similar
From: Marc Zyngier
[ Upstream commit 755a8bf5579d22eb5636685c516d8dede799e27b ]
If someone has the silly idea to write something along those lines:
extern u64 foo(void);
void bar(struct arm_smccc_res *res)
{
arm_smccc_1_1_smc(0xbad, foo(), res);
From: Rex Zhu
[ Upstream commit 8ef23364b654d44244400d79988e677e504b21ba ]
This is required by gfx hw and can fix the rlc hang when
do s3 stree test on Cz/St.
Reviewed-by: Alex Deucher
Signed-off-by: Hang Zhou
Signed-off-by: Rex Zhu
Signed-off-by: Alex Deucher
Signed-off-by: Sasha Levin
--
From: Lothar Felten
[ Upstream commit 3ad867001c91657c46dcf6656d52eb6080286fd5 ]
fix the sysfs shunt resistor read access: return the shunt resistor
value, not the calibration register contents.
update email address
Signed-off-by: Lothar Felten
Signed-off-by: Guenter Roeck
Signed-off-by: Sas
From: Bo Chen
[ Upstream commit cf1acec008f8d7761aa3fd7c4bca7e17b2d2512d ]
When the device is not up, the call to 'e1000_up()' from the error handling path
of 'e1000_set_ringparam()' causes a kernel oops with a null-pointer
dereference. The null-pointer dereference is triggered in function
'e100
From: Dan Carpenter
[ Upstream commit f196dec6d50abb2e65fb54a0621b2f1b4d922995 ]
The adt7475_read_word() function was meant to return negative error
codes on failure.
Signed-off-by: Dan Carpenter
Reviewed-by: Tokunori Ikegami
Signed-off-by: Guenter Roeck
Signed-off-by: Sasha Levin
---
driv
From: Mika Westerberg
[ Upstream commit 7fd6d98b89f382d414e1db528e29a67bbd749457 ]
Commit 7ae81952cda ("i2c: i801: Allow ACPI SystemIO OpRegion to conflict
with PCI BAR") made it possible for AML code to access SMBus I/O ports
by installing custom SystemIO OpRegion handler and blocking i80i driv
From: Marc Zyngier
[ Upstream commit 1d8f574708a3fb6f18c85486d0c5217df893c0cf ]
An unfortunate consequence of having a strong typing for the input
values to the SMC call is that it also affects the type of the
return values, limiting r0 to 32 bits and r{1,2,3} to whatever
was passed as an input.
1 - 100 of 727 matches
Mail list logo
