On 4/6/2021 2:49 PM, Zhen Lei wrote:
Delete one of the header files that are included
twice, all included header files are then rearranged alphabetically.
Reviewed-by: Keerthy
Signed-off-by: Zhen Lei
---
drivers/thermal/ti-soc-thermal/ti-bandgap.c | 35
On 11/14/2020 2:48 AM, Nishanth Menon wrote:
The default state of a device tree node is "okay". There is no specific
use of explicitly adding status = "okay" in the SoC dtsi.
Reviewed-by: Keerthy
Signed-off-by: Nishanth Menon
Reviewed-by: Tony Lindgren
Acked
On 11/3/2020 12:12 PM, Peter Ujfalusi wrote:
Eduardo, Keerthy,
On 29/10/2020 12.51, Tony Lindgren wrote:
* Peter Ujfalusi [201029 10:03]:
Disabling the notifier fixes the random shutdowns on OMAP4430 (ES2.0 and ES2.1)
but it does not cause any issues on OMAP4460 (PandaES) or OMAP3630
On 9/7/2020 11:52 AM, Herbert Xu wrote:
Resend with new subject.
Thanks Herbert.
Reviewed-by: Keerthy
---8<---
The sa2ul driver uses crypto_authenc_extractkeys and therefore
must select CRYPTO_AUTHENC.
Fixes: 7694b6ca649f ("crypto: sa2ul - Add crypto driver")
Report
): undefined reference to `sha512_zero_message_hash'
Thanks for catching this.
Reviewed-by: Keerthy
Signed-off-by: Randy Dunlap
Reported-by: Randy Dunlap # 2020-07-29
Cc: Herbert Xu
Cc: "David S. Miller"
Cc: linux-cry...@vger.kernel.org
Cc: Tero Kristo
Cc: Keerthy
---
driv
On 6/15/2020 1:30 AM, Luca Ceresoli wrote:
Hi Rob, Keerthy,
On 13/06/20 00:19, Rob Herring wrote:
On Wed, Jun 03, 2020 at 10:03:17PM +0200, Luca Ceresoli wrote:
The "Required properties:" section is copied verbatim for each of the two
supported chips. In preparation to add
On 10/1/2019 12:16 AM, Olof Johansson wrote:
On Mon, Sep 30, 2019 at 6:49 AM Will Deacon wrote:
On Fri, Sep 20, 2019 at 01:29:46PM +0530, Keerthy wrote:
Commit 6334150e9a36 ("remoteproc: don't allow modular build")
changes CONFIG_REMOTEPROC to a boolean from a tristate config
op
ig to have CONFIG_REMOTEPROC built in.
Fixes: commit 6334150e9a3646 ("remoteproc: don't allow modular build")
Signed-off-by: Keerthy
---
arch/arm/configs/omap2plus_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/configs/omap2plus_defconfig
ig to have CONFIG_REMOTEPROC built in.
Fixes: 6334150e9a36 ("remoteproc: don't allow modular build")
Signed-off-by: Keerthy
---
arch/arm64/configs/defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 8e05c3
ig to have CONFIG_REMOTEPROC built in.
Fixes: 6334150e9a36 ("remoteproc: don't allow modular build")
Signed-off-by: Keerthy
---
arch/arm/configs/davinci_all_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/configs/davinci_all_defconfig
ig to have CONFIG_REMOTEPROC built in.
Fixes: 6334150e9a36 ("remoteproc: don't allow modular build")
Signed-off-by: Keerthy
---
arch/arm/configs/multi_v7_defconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/configs/multi_v7_defconfig
b/arch/arm/config
quick testing on other boards welcome.
Patches apply on top of linux-next branch
Changes in v2:
Cc the right lists.
Keerthy (4):
arm: configs: omap2plus_defconfig: Change CONFIG_REMOTEPROC from m to
y
arm: configs: davinci_all_defconfig: Change CONFIG_REMOTEPROC from m
to y
arm
in?
That will be some magnitude of change.
Best Regards,
Keerthy
em. That's because clkdm_allow_idle_nolock() and
clkdm_deny_idle_nolock() have usage count with clkdm->forcewake_count.
Let's drop the unpaired sysc_clkdm_deny_idle() to fix idling of devices.
Tested-by: Keerthy
I believe still the previous fix [1] for nfs boot is still not on
linux-next. Are
st succeed with clk_get() to continue. For modules with
no clock names specified in device tree we will just ignore the clocks.
Tested for DS0 and RTC+DDR modes on AM437x
FWIW
Tested-by: Keerthy
Fixes: 2b2f7def058a ("bus: ti-sysc: Add support for missing clockdomain
handling")
On 19/08/19 11:57 AM, Stephen Boyd wrote:
Quoting Keerthy (2019-08-18 21:24:58)
Hi Stephen,
commit 03a3bb7ae63150230c5de645dc95e673ebf17e1a
Author: Stephen Boyd
Date: Mon Aug 5 16:32:41 2019 -0700
hwrng: core - Freeze khwrng thread during suspend
Commit seems to be breaking
el threads ... done.
[ 74.175628] OOM killer enabled.
[ 74.178796] Restarting tasks ... done.
[ 74.226769] PM: suspend exit
rtcwake: write error
1
One task refusing to freeze is the final error i am seeing.
- Keerthy
On 13/08/19 5:34 PM, Tony Lindgren wrote:
* Keerthy [190626 00:50]:
The patch fixes a bunch of static checker warnings.
Sorry I just noticed that this one is still pending, applying
into fixes.
Thanks Tony
Tony
the legacy platform data.
I also noticed we need two fixes for the ti-sysc driver while looking
at the warnings.
Tony,
Apart from Patch 2(breaks DS0 on AM3). Rest all work fine.
Tested for DS0/RTC+ddr on AM4, DS0 on AM3 Boneblack.
You can add my:
Tested-by: Keerthy
For all the 7 patches except
tried looking through the
git log, and the initial commit itself didn't add the MSTANDBY_ flags
but used the SYSC_HAS_MIDLEMODE.
Jyri,
Do you know the history?
Tony/Suman,
This patch breaks DS0 on am3.
- Keerthy
regards
Suman
Let's fix the warning by removing SYSC_HAS_MIDLEMODE. Note
On 29/06/19 2:07 AM, Nishanth Menon wrote:
On 09:08-20190628, Keerthy wrote:
[..]
+ select GPIO_SYSFS
+ select GPIO_DAVINCI
Could you help explain the logic of doing this? commit message is
basically the diff in English. To me, this does NOT make sense.
I understand
Silence error prints in case of EPROBE_DEFER. This avoids
multiple/duplicate defer prints during boot.
Signed-off-by: Keerthy
---
drivers/gpio/gpio-davinci.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index
On 02/07/19 5:01 PM, Lee Jones wrote:
On Tue, 02 Jul 2019, Colin Ian King wrote:
On 02/07/2019 11:44, Lee Jones wrote:
On Fri, 28 Jun 2019, Colin Ian King wrote:
On 28/06/2019 15:36, Mark Brown wrote:
On Thu, Jun 27, 2019 at 02:16:39PM +0100, Colin King wrote:
From: Colin Ian King
On 28/06/19 9:49 AM, Herbert Xu wrote:
On Tue, Jun 18, 2019 at 05:38:33PM +0530, Keerthy wrote:
The series adds Crypto hardware accelerator support for SA2UL.
SA2UL stands for security accelerator ultra lite.
Please cc linux-cry...@vger.kernel.org.
Okay. I will do that.
Thanks,
On 27/06/19 8:02 PM, Nishanth Menon wrote:
On 16:39-20190627, Keerthy wrote:
Enable GPIO_DAVINCI and related configs for TI K3 AM6 platforms.
Signed-off-by: Keerthy
---
Changes in v2:
* Enabling configs in Kconfig.platforms file instead of defconfig.
* Removed GPIO_DEBUG config
= LP87565_BUCK_3210;
max_idx = LP87565_BUCK_3210;
+ break;
Thanks Colin.
Reviewed-by: Keerthy
default:
dev_err(lp87565->dev, "Invalid lp config %d\n",
lp87565->dev_type);
Enable GPIO_DAVINCI and related configs for TI K3 AM6 platforms.
Signed-off-by: Keerthy
---
Changes in v2:
* Enabling configs in Kconfig.platforms file instead of defconfig.
* Removed GPIO_DEBUG config.
arch/arm64/Kconfig.platforms | 2 ++
1 file changed, 2 insertions(+)
diff --git
On 27/06/19 10:41 AM, Stephen Rothwell wrote:
Hi Lee,
After merging the mfd tree, today's linux-next build (x86_64 allmodconfig)
produced this warning:
drivers/regulator/lp87565-regulator.c: In function 'lp87565_regulator_probe':
drivers/regulator/lp87565-regulator.c:182:11: warning: this
The patch fixes a bunch of static checker warnings.
Reported-by: Dan Carpenter
Signed-off-by: Keerthy
---
drivers/soc/ti/pm33xx.c | 15 ++-
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti/pm33xx.c
index bb77c220b6f8
On 6/24/2019 7:53 PM, David Miller wrote:
From: Keerthy
Date: Mon, 24 Jun 2019 10:46:19 +0530
Commit bfe59032bd6127ee190edb30be9381a01765b958 ("net: ethernet:
ti: cpsw: use cpsw as drv data")changes
the driver data to struct cpsw_common *cpsw. This is done
only in pr
p; resume also to fetch the updated driver data.
Fixes: bfe59032bd6127ee1 ("net: ethernet: ti: cpsw: use cpsw as drv data")
Signed-off-by: Keerthy
---
Change in v2:
* Added NULL Checks for cpsw->slaves[i].ndev in suspend/resume functions.
drivers/
p; resume also to fetch the updated driver data.
Fixes: bfe59032bd6127ee1 ("net: ethernet: ti: cpsw: use cpsw as drv data")
Signed-off-by: Keerthy
---
drivers/net/ethernet/ti/cpsw.c | 36 +++---
1 file changed, 11 insertions(+), 25 deletions(-)
diff --git a
ciphertext value and vice versa. In other words,
the same plaintext value will always result in the same ciphertext value.
Signed-off-by: Keerthy
---
drivers/crypto/sa2ul.c | 76 ++
1 file changed, 76 insertions(+)
diff --git a/drivers/crypto/sa2ul.c b/drivers
-by: Keerthy
---
drivers/crypto/Kconfig | 17 +
drivers/crypto/Makefile |1 +
drivers/crypto/sa2ul.c | 1151 +++
drivers/crypto/sa2ul.h | 384 +
4 files changed, 1553 insertions(+)
create mode 100644 drivers/crypto/sa2ul.c
create mode 100644 drivers
Triple DES (3DES), officially the Triple Data Encryption Algorithm
(TDEA or Triple DEA), is a symmetric-key block cipher, which applies
the DES cipher algorithm three times to each data block
Add 3DES ECB(Electronic code book) & CBC(Cipher Block Chaining)
Mode support.
Signed-off-by: Kee
hmac(sha256) HMAC algorithm support
and the message digest size is 32 bytes.
Signed-off-by: Keerthy
---
drivers/crypto/sa2ul.c | 52 ++
1 file changed, 52 insertions(+)
diff --git a/drivers/crypto/sa2ul.c b/drivers/crypto/sa2ul.c
index e3a1321f0666
The transform function can be used as is by other crypto
drivers that need to transform the 256 bit key using cpu.
Hence export it.
Signed-off-by: Keerthy
---
crypto/sha256_generic.c | 3 ++-
include/crypto/sha.h| 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/crypto
of 32 bytes is used for authetication
and AES in CBC mode is used in conjunction for encryption/decryption.
Signed-off-by: Keerthy
---
drivers/crypto/sa2ul.c | 92 ++
1 file changed, 92 insertions(+)
diff --git a/drivers/crypto/sa2ul.c b/drivers/crypto
bytes is used for authetication
and AES in CBC mode is used in conjunction for encryption/decryption.
Signed-off-by: Keerthy
---
drivers/crypto/sa2ul.c | 402 +
1 file changed, 402 insertions(+)
diff --git a/drivers/crypto/sa2ul.c b/drivers/crypto/sa2ul.c
Add crypto accelarator node. Define the psil specific config
node as well. This can be used in Packet Mode alone.
Signed-off-by: Keerthy
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 33
1 file changed, 33 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65
hmac(sha1) HMAC algorithm support
and the message digest size is 20 bytes.
Signed-off-by: Keerthy
---
drivers/crypto/sa2ul.c | 347 +
1 file changed, 347 insertions(+)
diff --git a/drivers/crypto/sa2ul.c b/drivers/crypto/sa2ul.c
index 9c9008e21867
on top of:
https://patchwork.kernel.org/project/linux-dmaengine/list/?series=114105
The above series adds couple of dmaengine APIs that are used
by the sa2ul driver. Hence there is a hard dependency on the
above series.
Keerthy (10):
dt-bindings: crypto: k3: Add sa2ul bindings documentation
crypto
and authentication of content in applications
requiring DRM (digital rights management) and
content/asset protection
The device includes one instantiation of SA2_UL named SA2_UL0
SA2UL needs on tx channel and a pair of rx dma channels.
Signed-off-by: Keerthy
---
.../devicetree/bindings/crypto
window
Keerthy (3):
dt-bindings: mfd: lp87565: Add LP87561 configuration
mfd: lp87565: Add support for 4-phase LP87561 combination
regulator: lp87565: Add 4-phase lp87561 regulator support
Thanks Lee Jones
On 6/13/2019 11:02 PM, Mark Brown wrote:
On Thu, Jun 13, 2019 at 10:32:45PM +0530, keerthy wrote:
On 6/13/2019 9:15 PM, Mark Brown wrote:
On Wed, Jun 12, 2019 at 08:16:20PM +0530, Keerthy wrote:
patches 1/3 2/3 are already applied to linux-next.
This doesn't build without those
On 6/13/2019 9:15 PM, Mark Brown wrote:
On Wed, Jun 12, 2019 at 08:16:20PM +0530, Keerthy wrote:
patches 1/3 2/3 are already applied to linux-next.
This doesn't build without those patches:
They are already on next. Do you want me to resend them as well?
CC drivers/regulator
Signed-off-by: Keerthy
Acked-by: Mark Brown
---
patches 1/3 2/3 are already applied to linux-next.
Changes in v2:
* Changed if/else block to switch statement.
drivers/regulator/lp87565-regulator.c | 17 -
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers
On 10/06/19 11:18 AM, Lee Jones wrote:
On Sat, 08 Jun 2019, Mark Brown wrote:
On Sat, Jun 08, 2019 at 09:26:31AM +0530, keerthy wrote:
mfd patches are on linux-next already. Hope you can pull this one now that
dependencies are met.
Someone will need to send me a copy of the patch, if I
On 6/11/2019 11:49 PM, Tero Kristo wrote:
On 05/06/2019 09:14, Keerthy wrote:
Enable GPIO_DAVINCI and related configs for TI K3 AM6 platforms.
Signed-off-by: Keerthy
---
arch/arm64/configs/defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/configs/defconfig b
On 5/28/2019 6:57 PM, Mark Brown wrote:
On Tue, May 28, 2019 at 03:23:41PM +0530, Keerthy wrote:
On 22/05/19 9:05 PM, Mark Brown wrote:
On Thu, May 16, 2019 at 10:02:18AM +0530, Keerthy wrote:
Acked-by: Mark Brown
This patch will come via the mfd branch?
I'd expect so, IIRC it had
On 6/8/2019 4:09 AM, Linus Walleij wrote:
On Thu, Jun 6, 2019 at 11:55 AM Keerthy wrote:
The patch adds k3 am654 compatible, specific properties and
an example.
Signed-off-by: Keerthy
Patch applied with the three others, so now all
GPIO changes are in tree.
Please funnel all the DTS
There are 2 push buttons: SW5 and SW6 that are basically connected to
WKUP_GPIO0_24 and WKUP_GPIO0_27 respectively. Add the respective
nodes and the pinctrl data to set the mode to GPIO and Input.
Signed-off-by: Keerthy
---
.../arm64/boot/dts/ti/k3-am654-base-board.dts | 27
Add gpio0/1 nodes under main domain. They have 96 and 90 gpios
respectively and all are capable of generating banked interrupts.
Signed-off-by: Keerthy
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 32
1 file changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts
The patch adds k3 am654 compatible, specific properties and
an example.
Signed-off-by: Keerthy
---
.../devicetree/bindings/gpio/gpio-davinci.txt | 18 ++
1 file changed, 18 insertions(+)
diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
b/Documentation
://patchwork.kernel.org/project/linux-arm-kernel/list/?series=112791
Posting as RFC as it has dependencies to be merged.
Resending with the linux-gpio and gpio Maintainers copied.
Changes in v2:
* Added a separate am654 compatible.
Keerthy (4):
dt-bindings: gpio: davinci: Add k3 am654 compatible
arm64: dts
Add gpio0 node under wakeup domain. This has 56 gpios
and all are capable of generating banked interrupts.
Signed-off-by: Keerthy
---
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 15 +++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
b
On 05/06/19 7:56 PM, Bartosz Golaszewski wrote:
śr., 5 cze 2019 o 10:02 Keerthy napisał(a):
Add new compatible for K3 AM654 SoCs.
Signed-off-by: Keerthy
---
drivers/gpio/gpio-davinci.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio
K3 AM6 platform has 2 instances of gpio banks on main domain
and 1 instance on wakeup domin. All are capable of generating
banked interrupts.
Changes in v2:
* Introduced a separate compatible for am654.
Documentation patch link: https://patchwork.kernel.org/patch/10976445/
Keerthy (3
Fix the compiler warning with ARM64 config enabled
as the current mask assumes 32 bit by default.
Signed-off-by: Keerthy
---
drivers/gpio/gpio-davinci.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index
Add K3 dependencies to enable the driver on K3 platforms.
Signed-off-by: Keerthy
---
drivers/gpio/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 62f3fe06cd2f..28dba62e2219 100644
--- a/drivers/gpio/Kconfig
+++ b
Add new compatible for K3 AM654 SoCs.
Signed-off-by: Keerthy
---
drivers/gpio/gpio-davinci.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index 0977590eb996..fc494a84a29d 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio
Add gpio0/1 nodes under main domain. They have 96 and 90 gpios
respectively and all are capable of generating banked interrupts.
Signed-off-by: Keerthy
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 32
1 file changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts
://patchwork.kernel.org/project/linux-arm-kernel/list/?series=112791
Posting as RFC as it has dependencies to be merged.
Changes in v2:
* Added a separate am654 compatible.
Keerthy (4):
dt-bindings: gpio: davinci: Add k3 am654 compatible
arm64: dts: ti: am6-wakeup: Add gpio node
arm64: dts: ti: am6-main
There are 2 push buttons: SW5 and SW6 that are basically connected to
WKUP_GPIO0_24 and WKUP_GPIO0_27 respectively. Add the respective
nodes and the pinctrl data to set the mode to GPIO and Input.
Signed-off-by: Keerthy
---
.../arm64/boot/dts/ti/k3-am654-base-board.dts | 27
The patch adds k3 am654 compatible, specific properties and
an example.
Signed-off-by: Keerthy
---
.../devicetree/bindings/gpio/gpio-davinci.txt | 18 ++
1 file changed, 18 insertions(+)
diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
b/Documentation
Add gpio0 node under wakeup domain. This has 56 gpios
and all are capable of generating banked interrupts.
Signed-off-by: Keerthy
---
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 15 +++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
b
On 05/06/19 11:46 AM, Lokesh Vutla wrote:
On 05/06/19 11:38 AM, Keerthy wrote:
Add gpio0 node under wakeup domain. This has 56 gpios
and all are capable of generating banked interrupts.
Signed-off-by: Keerthy
---
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 15 +++
1 file
Enable GPIO_DAVINCI and related configs for TI K3 AM6 platforms.
Signed-off-by: Keerthy
---
arch/arm64/configs/defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index d1b72f99e2f4..57d7a4c207bd 100644
--- a/arch/arm64
Add gpio0 node under wakeup domain. This has 56 gpios
and all are capable of generating banked interrupts.
Signed-off-by: Keerthy
---
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 15 +++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
b
Add gpio0/1 nodes under main domain. They have 96 and 90 gpios
respectively and all are capable of generating banked interrupts.
Signed-off-by: Keerthy
---
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 32
1 file changed, 32 insertions(+)
diff --git a/arch/arm64/boot/dts
://patchwork.kernel.org/project/linux-arm-kernel/list/?series=112791
Posting as RFC as it has dependencies to be merged.
Keerthy (3):
arm64: dts: ti: am6-wakeup: Add gpio node
arm64: dts: ti: am6-main: Add gpio nodes
arm64: dts: ti: am654-base-board: Add gpio_keys node
arch/arm64/boot/dts/ti/k3-am65
There are 2 push buttons: SW5 and SW6 that are basically connected to
WKUP_GPIO0_24 and WKUP_GPIO0_27 respectively. Add the respective
nodes and the pinctrl data to set the mode to GPIO and Input.
Signed-off-by: Keerthy
---
.../arm64/boot/dts/ti/k3-am654-base-board.dts | 27
Fix the compiler warning with ARM64 config enabled
as the current mask assumes 32 bit by default.
Signed-off-by: Keerthy
---
drivers/gpio/gpio-davinci.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index
Add K3 dependencies to enable the driver on K3 platforms.
Signed-off-by: Keerthy
---
drivers/gpio/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 62f3fe06cd2f..28dba62e2219 100644
--- a/drivers/gpio/Kconfig
+++ b
K3 AM6 platform has 2 instances of gpio banks on main domain
and 1 instance on wakeup domin. All are capable of generating
banked interrupts.
Keerthy (2):
gpio: davinci: Fix the compiler warning with ARM64 config enabled
gpio: Davinci: Add K3 Specific dependencies
drivers/gpio/Kconfig
usb4_tm is unsed on dra72 and accessing the module
with ti,sysc is causing a boot crash hence disable its target
module.
Fixes: 549fce068a3112 ("ARM: dts: dra7: Add l4 interconnect hierarchy and
ti-sysc data")
Reported-by: Vignesh Raghavendra
Signed-off-by: Keerthy
---
arch/ar
On 22/05/19 9:05 PM, Mark Brown wrote:
On Thu, May 16, 2019 at 10:02:18AM +0530, Keerthy wrote:
The LP8756x family has a single output 4-phase regulator
configuration. Add support for the same. The control
lies in the master buck which is buck0 for 4-phase
configuration. Enable/disable
be posting more patches for dropping hwmods properties as they
get tested.
Added missing dra71/76 patches on linux-next which get them to boot.
Tested for boot on dra71/76.
Tested for DS0 on AM43/33.
Tested for RTC+DDR mode on am43.
For the series:
Tested-by: Keerthy
Regards,
Tony
be posting more patches for dropping hwmods properties as they
get tested.
Tony,
What is the base of this series? It does not apply cleanly neither on
linux-next nor on top of 5.2->rc1. If there are dependencies do you have
a branch?
- Keerthy
Regards,
Tony
Tony Lindgren (12):
bus:
lp87561 is a single output 4-phase regulator configuration.
Add support for the same.
Signed-off-by: Keerthy
---
.../devicetree/bindings/mfd/lp87565.txt | 36 +++
1 file changed, 36 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/lp87565.txt
b
Add support for 4-phase lp87561 combination.
Signed-off-by: Keerthy
---
drivers/mfd/lp87565.c | 4
include/linux/mfd/lp87565.h | 2 ++
2 files changed, 6 insertions(+)
diff --git a/drivers/mfd/lp87565.c b/drivers/mfd/lp87565.c
index 32d2a07d4354..8ad688fe75f9 100644
--- a/drivers
Signed-off-by: Keerthy
---
Changes in v2:
* Changed if/else block to switch statement.
drivers/regulator/lp87565-regulator.c | 17 -
1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/lp87565-regulator.c
b/drivers/regulator/lp87565-regulator.c
index
Add support for 4-phase lp87561 combination.
Data Sheet: https://www.ti.com/lit/ds/symlink/lp87561-q1.pdf
Keerthy (3):
dt-bindings: mfd: lp87565: Add lp87561 configuration
mfd: lp87565: Add support for 4-phase lp87561 combination
regulator: lp87565: Add 4-phase lp87561 regulator support
On 15/05/19 4:38 PM, Mark Brown wrote:
On Wed, May 15, 2019 at 03:38:48PM +0530, Keerthy wrote:
@@ -172,6 +178,9 @@ static int lp87565_regulator_probe(struct platform_device
*pdev)
if (lp87565->dev_type == LP87565_DEVICE_TYPE_LP87565_Q1) {
min_idx = LP87565_BUCK
lp87561 is a single output 4-phase regulator configuration.
Add support for the same.
Data Sheet: https://www.ti.com/lit/ds/symlink/lp87561-q1.pdf
Signed-off-by: Keerthy
---
.../devicetree/bindings/mfd/lp87565.txt | 36 +++
1 file changed, 36 insertions(+)
diff --git
Signed-off-by: Keerthy
---
drivers/regulator/lp87565-regulator.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/drivers/regulator/lp87565-regulator.c
b/drivers/regulator/lp87565-regulator.c
index 81eb4b890c0c..8255650df1cd 100644
--- a/drivers/regulator/lp87565-regulator.c
+++ b/drivers
Add support for 4-phase lp87561 combination.
Data Sheet: https://www.ti.com/lit/ds/symlink/lp87561-q1.pdf
Signed-off-by: Keerthy
---
drivers/mfd/lp87565.c | 4
include/linux/mfd/lp87565.h | 2 ++
2 files changed, 6 insertions(+)
diff --git a/drivers/mfd/lp87565.c b/drivers/mfd
Add support for 4-phase lp87561 combination.
Data Sheet: https://www.ti.com/lit/ds/symlink/lp87561-q1.pdf
Keerthy (3):
dt-bindings: mfd: lp87565: Add lp87561 configuration
mfd: lp87565: Add support for 4-phase lp87561 combination
regulator: lp87565: Add 4-phase lp87561 regulator support
On 02/05/19 3:11 AM, Tony Lindgren wrote:
Hi all,
Here are few fixes for the am335x d_can boot issue Sebastian reported for
Beaglebone.
Tested for AM437x-gp-evm RTC+DDR mode and DS0.
Also tried DS0 on Am335x beaglebone black.
For the above:
Tested-by: Keerthy
Regards,
Tony
Tony
Currently there is no way to distinguish if the SoC entered DS0
mode or the RTC only mode. Hence add a print before entering
the RTC only mode.
Signed-off-by: Keerthy
---
drivers/soc/ti/pm33xx.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/soc/ti/pm33xx.c b/drivers/soc/ti
On 09/04/19 10:52 AM, Stephen Rothwell wrote:
Hi all,
Today's linux-next merge of the rtc tree got a conflict in:
drivers/rtc/rtc-omap.c
between commit:
6256f7f7f217 ("rtc: OMAP: Add support for rtc-only mode")
from the omap tree and commit:
35118b7a4ea0 ("rtc: omap: let the
On 09/04/19 10:37 AM, Masahiro Yamada wrote:
On Tue, Apr 9, 2019 at 2:00 PM Keerthy wrote:
On 08/04/19 9:48 PM, Tony Lindgren wrote:
Hi,
* Masahiro Yamada [190408 07:56]:
is only generated and included
by arch/arm/mach-omap2/, so it does not need to reside in the
globally visible
cated file.
Looks like a nice improvment to me, adding Keerthy and Dave to Cc.
Keerthy and Dave, can you please test this series with am3 and am4
PM code?
Tested for Deep Sleep0 on AM33xx Beaglebone-black.
Tested for Deep Sleep0 on AM437x-gp-evm.
Applied this on top of Tony's for-next with the
story when needed, so I suggest we apply this.
Adding Keerthy to Cc as he just posted a similar patch.
I posted the duplicate. Thanks for looping in.
Regards,
Tony
omap_dm_timer_set_load_start is no longer used hence delete the
function and remove the below warning.
drivers/clocksource/timer-ti-dm.c:589:12:
warning: ‘omap_dm_timer_set_load_start’ defined but not used
Signed-off-by: Keerthy
---
drivers/clocksource/timer-ti-dm.c | 28
On 10/03/19 8:36 PM, Axel Lin wrote:
This driver is using devm_regulator_register() so it is not necessary
to save *rdev for clean up. Actually the pmic->rdev[id] is not used now.
Reviewed-by: Keerthy
Signed-off-by: Axel Lin
---
drivers/regulator/palmas-regulator.c |
On 01/03/19 11:46 AM, Axel Lin wrote:
LP87565_BUCK_0 is missed, fix it.
Fixes: f0168a9bf ("regulator: lp87565: Add support for lp87565 PMIC regulators")
Signed-off-by: Axel Lin
---
Hi J Keerthy,
While reading the code, it seems strange that LP87565_BUCK_0 is never used.
So current
C_THERMAL
>> Depends on [n]: THERMAL [=y] && (ARCH_HAS_BANDGAP || COMPILE_TEST [=n]) &&
>> HAS_IOMEM [=y]
>> Selected by [m]:
>> - MMC_SDHCI_OMAP [=m] && MMC [=m] && MMC_SDHCI_PLTFM [=m] && OF [=y]
>>
>>
>> Maybe there is alrea
On 23/01/19 2:19 PM, YueHaibing wrote:
> There is no need to have the 'gpio_unbanked' variable static since
> new value always be assigned before use it.
Acked-by: Keerthy
>
> Signed-off-by: YueHaibing
> ---
> drivers/gpio/gpio-davinci.c | 4 ++--
> 1 file change
On 19/01/19 1:28 PM, J, KEERTHY wrote:
>
>
> On 1/19/2019 12:42 PM, Andreas Kemnade wrote:
>> On Sat, 19 Jan 2019 12:09:48 +0530
>> "J, KEERTHY" wrote:
>>
>>> On 1/19/2019 1:18 AM, Tony Lindgren wrote:
>>>> * Andreas Kemnade
1 - 100 of 2181 matches
Mail list logo