Signed-off-by: Xiubo Li li.xi...@freescale.com
---
sound/soc/generic/simple-card.c | 9 +
1 file changed, 9 insertions(+)
diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c
index e473dc9..e7cd9bb 100644
--- a/sound/soc/generic/simple-card.c
+++
This patch adds and enables SGTL5000 codec support, and also specified
the corresponding SAI node.
Signed-off-by: Xiubo Li li.xi...@freescale.com
---
arch/arm/boot/dts/vf610-twr.dts | 47 +
1 file changed, 47 insertions(+)
diff --git
This is the SGTL5000 codec based off-CODEC widgets supports.
Signed-off-by: Xiubo Li li.xi...@freescale.com
---
sound/soc/fsl/Kconfig | 25 ++
sound/soc/fsl/Makefile| 3 +++
sound/soc/fsl/snd-soc-simple-card-vf610.c | 44
For many audio cards there need to add some off-CODEC widgets, and this
is hard to be supported by dts only, because maybe some widgets need one
or more call backs, such as wevent.
Signed-off-by: Xiubo Li li.xi...@freescale.com
---
.../devicetree/bindings/sound/simple-card.txt | 1 +
On Mon, Jan 06, 2014 at 04:20:48PM +0800, fengguang...@intel.com wrote:
Hi Dave,
We noticed throughput drop in test case
vm-scalability/300s-lru-file-readtwice (*)
between v3.11 and v3.12, and it's still low as of v3.13-rc6:
v3.11 v3.12
On Thu, Jan 02, 2014 at 03:55:34PM -0800, Andrew Morton wrote:
On Mon, 30 Dec 2013 21:45:17 +0800 Li Wang liw...@ubuntukylin.com wrote:
Analogous to shrink_dcache_parent except that it collects inodes.
It is not very appropriate to be put in dcache.c, but d_walk can only
be invoked from
On Wed, Jan 8, 2014 at 5:14 AM, Stephen Rothwell s...@canb.auug.org.au wrote:
Hi Linus,
Today's linux-next merge of the gpio tree got a conflict in
arch/xtensa/Kconfig between commit dbacef090841 (xtensa: add SMP
support) from the xtensa tree and commit a1a2bdec4772 (gpio: xtensa:
depend on
This patch adds a test preventing streamon() if there is no buffer
ready.
Without this patch, a user could call streamon() before
preparing any buffer. This leads to a situation where if he calls
close() before calling streamoff() the device is kept streaming.
Signed-off-by: Ricardo Ribalda
On Tue, Jan 07, 2014 at 08:54:56AM +, Lee Jones wrote:
Dmitry, Jonathan,
This is for you.
The following changes since commit 6ce4eac1f600b34f2f7f58f9cd8f0503d79e42ae:
Linux 3.13-rc1 (2013-11-22 11:30:55 -0800)
are available in the git repository at:
Depend on the regmap reg cache implementation for register caching done in
the twl-core driver.
The local register cache can be removed and we can keep only shadow copies
of certain ctl registers for pop noise reduction.
Signed-off-by: Peter Ujfalusi peter.ujfal...@ti.com
---
Hi Andi,
On Tue, 7 Jan 2014 14:14:07 -0800, Andi Kleen wrote:
From: Andi Kleen a...@linux.intel.com
perf stat has a --delay option to delay measuring the workload.
This is useful to skip measuring the startup phase of the program, which
is often very different from the main workload.
The
Dmitry, Jonathan,
This is for you.
The following changes since commit 6ce4eac1f600b34f2f7f58f9cd8f0503d79e42ae:
Linux 3.13-rc1 (2013-11-22 11:30:55 -0800)
are available in the git repository at:
git://git.linaro.org/people/ljones/mfd.git tags/ib-iio-input-3.13-1
Hi Linus,
LCA fixes tree,
i915 and nouveau fixes, a revert for i915 gm45 backlight, and a
MAINTAINERS update for the i915 driver, as it now has a co-maintainer.
Dave.
The following changes since commit ef350bb7c5e0748f7d17f1d70c6b0eec5f64f446:
Merge tag 'ext4_for_linus_stable' of
On Tue, 07 Jan 2014, Stephen Boyd wrote:
On 01/07, Lee Jones wrote:
+ return of_platform_populate(pdev-dev.of_node, NULL, NULL,
pdev-dev);
+}
Can't you use the MFD core instead?
Are you suggesting using mfd_add_devices()? At first glance it looks
like that
On Mon, Jan 06, 2014 at 05:46:04PM +0100, Michal Hocko wrote:
On Sun 05-01-14 08:35:01, Han Pingtian wrote:
[...]
From f4d085a880dfae7638b33c242554efb0afc0852b Mon Sep 17 00:00:00 2001
From: Han Pingtian ha...@linux.vnet.ibm.com
Date: Fri, 3 Jan 2014 11:10:49 +0800
Subject: [PATCH] mm:
Alexander Gordeev agord...@redhat.com writes:
This update also fixes a stylistic (naming and messaging only)
confusion of MSI-X vs multiple MSIs which are not the same.
Signed-off-by: Alexander Gordeev agord...@redhat.com
Looks good to me.
Acked-by: Kalle Valo kv...@qca.qualcomm.com
Do you
On 01/06/2014 04:26 PM, Jan Kara wrote:
On Mon 06-01-14 15:51:55, Raghavendra K T wrote:
Currently, max_sane_readahead returns zero on the cpu with empty numa node,
fix this by checking for potential empty numa node case during calculation.
We also limit the number of readahead pages to 4k.
On Tue, Jan 07, 2014 at 09:47:05PM +0100, Stephen Warren wrote:
On 01/07/2014 07:10 AM, Peter De Schrijver wrote:
On Mon, Jan 06, 2014 at 09:50:42PM +0100, Stephen Warren wrote:
On 12/24/2013 06:32 AM, Peter De Schrijver wrote:
Reduce fuse.c to the minimum functionality required for the
restoring the list.. I really should drop all emails you send off list
into /dev/null.
On Wed, Jan 08, 2014 at 09:28:40AM +0100, Peter Zijlstra wrote:
On Tue, Jan 07, 2014 at 10:23:22PM +0100, Andi Kleen wrote:
Yes we very much rely on the FREEZE bits for LBR. PT and LBR being
mutually
On 01/08/2014 04:49 AM, Peter Zijlstra wrote:
On Tue, Jan 07, 2014 at 03:41:54PM +, Morten Rasmussen wrote:
I think that could work if we sort of the priority scaling issue that I
mentioned before.
We talked a bit about this on IRC a month or so ago, right? My memories
from that are
Hello Dan;
On Wed, 2014-01-08 at 10:47 +0300, Dan Carpenter wrote:
On Tue, Jan 07, 2014 at 11:24:57PM +0100, Rostislav Lisovy wrote:
This patch adds Comedi driver for Humusoft MF634 (PCIe) and
MF624 (PCI) data acquisition cards. The legacy card Humusoft
MF614 is not supported. More info
On Wed, Jan 08, 2014 at 04:32:18PM +0800, Alex Shi wrote:
In my old power aware scheduling patchset, I had tried the 95 to 99. But
all those values will lead imbalance when we test while(1) like cases.
like in a 24LCPUs groups, 24*5% 1. So, finally use 100% as overload
indicator. And in
On 01/07/2014 11:37 PM, Morten Rasmussen wrote:
So something like:
avg = runnable + p(i) * blocked; where p(i) \e [0,1]
could maybe be used to replace the cpu_load array and still represent
the concept of looking at a bigger picture for larger sets. Leaving open
the
On 01/07/2014 03:43 AM, Andrew Morton wrote:
On Mon, 6 Jan 2014 15:51:55 +0530 Raghavendra K T
raghavendra...@linux.vnet.ibm.com wrote:
+ /*
+* Readahead onto remote memory is better than no readahead when local
+* numa node does not have memory. We sanitize readahead
If echo -1 /proc/vm/sys/min_free_kbytes, the system will hang.
Changing proc_dointvec() to proc_dointvec_minmax() in the
min_free_kbytes_sysctl_handler() can prevent this to happen.
Signed-off-by: Han Pingtian ha...@linux.vnet.ibm.com
---
mm/page_alloc.c |7 ++-
1 files changed, 6
Add top.children config option for setting default value of
callchain accumulation. It affects the output only if one of
-g or --call-graph option is given as well.
A user can write .perfconfig file like below to enable accumulation
by default:
$ cat ~/.perfconfig
[top]
children = true
The cpumode and level in struct addr_localtion was set for a sample
and but updated as cumulative callchains were added. This led to have
non-matching symbol and cpumode in the output.
Update it accordingly based on the fact whether the map is a part of
the kernel or not. This is a reverse of
The fill_callchain_info() will be shared with perf top --children.
Cc: Arun Sharma asha...@fb.com
Cc: Frederic Weisbecker fweis...@gmail.com
Signed-off-by: Namhyung Kim namhy...@kernel.org
---
tools/perf/builtin-report.c | 38 +-
tools/perf/util/callchain.c |
The machine__resolve_callchain() is called only if symbol_conf.
use_callchain is set so no need to check it again.
Signed-off-by: Namhyung Kim namhy...@kernel.org
---
tools/perf/util/machine.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/tools/perf/util/machine.c
Currently if a sample was filtered by command line option, it just
dropped. But this affects final output in that the percentage can be
different since the filtered entries were not included to the total.
For example, if an original output looked like below:
$ perf report --stdio -s comm
#
When accumulating callchain entry, also save current snapshot of the
chain so that it can show the rest of the chain.
Cc: Arun Sharma asha...@fb.com
Cc: Frederic Weisbecker fweis...@gmail.com
Signed-off-by: Namhyung Kim namhy...@kernel.org
---
tools/perf/builtin-report.c | 21
Call __hists__add_entry() for each callchain node to get an
accumulated stat for an entry. Introduce new cumulative_iter ops to
process them properly.
Cc: Arun Sharma asha...@fb.com
Cc: Frederic Weisbecker fweis...@gmail.com
Signed-off-by: Namhyung Kim namhy...@kernel.org
---
Reuse hist_entry_iter__add() function to share the similar code with
perf report. Note that it needs to be called with hists.lock so tweak
some internal functions not to deadlock or hold the lock too long.
Signed-off-by: Namhyung Kim namhy...@kernel.org
---
tools/perf/builtin-top.c | 75
When filtering by thread, dso or symbol on TUI it also update total
period so that the output shows different result than no filter - the
percentage changed to relative to filtered entries only. Sometimes
(always?) this is not desired since users might expect same results
with filter.
The callchain_cursor_snapshot() is for saving current status of the
callchain. It'll be used to accumulate callchain information for each node.
Cc: Arun Sharma asha...@fb.com
Cc: Frederic Weisbecker fweis...@gmail.com
Signed-off-by: Namhyung Kim namhy...@kernel.org
---
Now the hist_entry_iter code will be shared with perf top code base.
So move it to util/hist.c and do some necessary cleanups and renames.
Cc: Arun Sharma asha...@fb.com
Cc: Frederic Weisbecker fweis...@gmail.com
Signed-off-by: Namhyung Kim namhy...@kernel.org
---
tools/perf/builtin-report.c |
The new -add_entry_cb() will be called after an entry was added to
the histogram. It's used for code sharing between perf report and
perf top.
Also pass @arg to the callback function. It'll be used by perf top
later.
Cc: Arun Sharma asha...@fb.com
Cc: Frederic Weisbecker fweis...@gmail.com
It is possble that a callchain has cycles or recursive calls. In that
case it'll end up having entries more than 100% overhead in the
output. In order to prevent such entries, cache each callchain node
and skip if same entry already cumulated.
Cc: Arun Sharma asha...@fb.com
Cc: Frederic
The report__resolve_callchain() can be shared with perf top code as it
doesn't really depend on the perf report code. Factor it out as
sample__resolve_callchain(). The same goes to the hist_entry__append_
callchain() too.
Acked-by: Jiri Olsa jo...@redhat.com
Cc: Arun Sharma asha...@fb.com
Cc:
Hello,
This is my third attempt to implement cumulative hist period report.
This work begins from Arun's SORT_INCLUSIVE patch [1] but I completely
rewrote it from scratch.
The patch 01 to 03 are independent cleanups and can be applied separately.
Please see the patch 04/28. I refactored
This reverts commit b1d27c79c8377df1880447375deffa3bb82c7bd3.
Previously we switched the SSI scriprt to dual-fifo mode to reduce playback
underrun issue, which is only included by SDMA firmware version 2. However,
there are quite a lot people still using version 1 or default firmware in
the ROM
Hi Joerg,
Thanks for fix up this issue!
I forgot to test the changes against IA64 platform. There's another
issue related to IA64, I will send out the patch soon. I have setup
cross compilation environment for IA64 and verified all changes
passing compilation tests.
Thanks!
Gerry
On
Previously we added dual-fifo script support for SSI and SDMA, meanwhile, we
switched the default script in DT to this new script. However, there're still
quite a few people using the old version or even ROM firmware which means they
don't provide any firmware to SDMA driver. In these cases, the
i.MX series have inner firmware in its ROM code: when SDMA isn't provided
any firmware from Kernel or rootfs, the default inner ROM firmware will be
activated. However the current driver doesn't assign any script number to
this situation, and those platform running in this case would be broken.
On Wed, Jan 08, 2014 at 10:23:18AM +0200, Kalle Valo wrote:
Looks good to me.
Acked-by: Kalle Valo kv...@qca.qualcomm.com
Thanks, Kalle.
Do you want me to take this patch to my ath.git tree or how were you
planning to handle it?
I see no option other than pushing it thru pci.git tree at
From: Wu Zhangjin fal...@meizu.com
During embedded linux system booting, before decompressing the kernel image,
the bootloader(E.g. Uboot) loads the compressed kernel image and ramdisk into
two contiguous memory space, these two memory space are fixed after the Uboot
is released, as a result, the
Hi Peter,
Joining the discussion late as I was on vacation...
On Mon, 23 Dec 2013 11:43:21 +0100, Peter Wu wrote:
Nevermind this patch, it does not really fix the memleak because
i2c_set_adapdata() calls dev_set_drvdata() which allocates memory.
(I must have ran kmemleak too early, right
On Wed, Jan 08, 2014 at 11:45:38AM +0530, Roger Quadros wrote:
diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
index b381fa6..5635202 100644
--- a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
+++
On 2014-01-06 15:17, Lothar Waßmann wrote:
The first patch in this set converts some messages that are printed
in case of errors to be error messages rather than debug messages.
The second patch fixes a bug in the video selection code that
incorrectly OR's together the 'pixelclk-active' and
Add the necessary entries required for S2MPA01 multi-function
device. While at it also convert whitespaces to tabs in core.h.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
---
drivers/mfd/sec-core.c | 39 +++
include/linux/mfd/samsung/core.h| 16 ++-
On 7 January 2014 13:20, Viresh Kumar viresh.ku...@linaro.org wrote:
Ping!!
Two things:
- I didn't had CONFIG_FTRACE_SYSCALLS enabled earlier
- On latest linux,
b4a839b Add linux-next specific files for 20140106
I don't see that crash anymore with our without
CONFIG_FTRACE_SYSCALLS enabled.
--
pm_runtime_get/put_sync() can sleep so don't hold spinlock while
calling them.
This patch prevents a BUG() during system suspend when
CONFIG_DEBUG_ATOMIC_SLEEP is enabled.
Bug is present in Kernel versions v3.9 onwards.
Reported-by: Tomi Valkeinen tomi.valkei...@ti.com
Signed-off-by:
On Sun, Dec 29, 2013 at 10:48 PM, Antonios Vamporakis a...@area128.com wrote:
Signed-off-by: Antonios Vamporakis a...@area128.com
CC: John Crispin blo...@openwrt.org
Patch is obviously correct, applied.
Yours,
Linus Walleij
--
To unsubscribe from this list: send the line unsubscribe
Hi Lee,
Thanks for the review.
On 8 January 2014 14:32, Lee Jones lee.jo...@linaro.org wrote:
Add the necessary entries required for S2MPA01 multi-function
device. While at it also convert whitespaces to tabs in core.h.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
---
On Tue, Jan 07, 2014 at 06:50:40PM +, Greg Kroah-Hartman wrote:
On Tue, Jan 07, 2014 at 10:09:50AM +, Mark Rutland wrote:
Hi Greg,
On Mon, Jan 06, 2014 at 10:39:15PM +, Greg Kroah-Hartman wrote:
3.10-stable review patch. If anyone has any objections, please let me
know.
Hello,
On 2014-01-08 09:01, Ricardo Ribalda Delgado wrote:
This patch adds a test preventing streamon() if there is no buffer
ready.
Without this patch, a user could call streamon() before
preparing any buffer. This leads to a situation where if he calls
close() before calling streamoff() the
@@ -92,7 +93,7 @@ struct sec_platform_data {
int buck3_default_idx;
int buck4_default_idx;
- int buck_ramp_delay;
+ int buck_ramp_delay;
What's this?
To support callchain accumulation, @entry should be recognized if it's
accumulated or not when add_hist_entry() called. The period of an
accumulated entry should be added to -stat_acc but not -stat. Add
@sample_self arg for that.
Cc: Arun Sharma asha...@fb.com
Cc: Frederic Weisbecker
Now perf top and perf report will show children column by default if
it has callchain information.
Requested-by: Ingo Molnar mi...@kernel.org
Cc: Arun Sharma asha...@fb.com
Cc: Frederic Weisbecker fweis...@gmail.com
Signed-off-by: Namhyung Kim namhy...@kernel.org
---
tools/perf/util/symbol.c |
Add report.children config option for setting default value of
callchain accumulation. It affects the report output only if
perf.data contains callchain info.
A user can write .perfconfig file like below to enable accumulation
by default:
$ cat ~/.perfconfig
[report]
children = true
And
commit: 3b3dc052f79731f4a7389b760060928da18823c0 [6/22] iommu/vt-d: fix
PCI device reference leakage on error recovery path
config: x86_64-randconfig-r0-01080757 (attached as .config)
All error/warnings:
drivers/iommu/dmar.c: In function 'dmar_parse_dev_scope':
drivers/iommu/dmar.c:153:5:
Sometimes it needs to disable some columns at runtime. Add help
functions to support that.
Cc: Jiri Olsa jo...@redhat.com
Cc: Arun Sharma asha...@fb.com
Cc: Frederic Weisbecker fweis...@gmail.com
Signed-off-by: Namhyung Kim namhy...@kernel.org
---
tools/perf/ui/hist.c | 17 +
Print accumulated stat of a hist entry if requested.
Cc: Arun Sharma asha...@fb.com
Cc: Frederic Weisbecker fweis...@gmail.com
Signed-off-by: Namhyung Kim namhy...@kernel.org
---
tools/perf/ui/gtk/hists.c | 16
1 file changed, 16 insertions(+)
diff --git
If -g cumulative option is given, it needs to show entries which don't
have self overhead. So apply percent-limit to accumulated overhead
percentage in this case.
Cc: Arun Sharma asha...@fb.com
Cc: Frederic Weisbecker fweis...@gmail.com
Signed-off-by: Namhyung Kim namhy...@kernel.org
---
Print accumulated stat of a hist entry if requested.
Cc: Arun Sharma asha...@fb.com
Cc: Frederic Weisbecker fweis...@gmail.com
Signed-off-by: Namhyung Kim namhy...@kernel.org
---
tools/perf/ui/hist.c | 45 +
tools/perf/util/hist.h | 1 +
2 files
Print accumulated stat of a hist entry if requested.
Cc: Arun Sharma asha...@fb.com
Cc: Frederic Weisbecker fweis...@gmail.com
Signed-off-by: Namhyung Kim namhy...@kernel.org
---
tools/perf/ui/browsers/hists.c | 17 +
1 file changed, 17 insertions(+)
diff --git
commit: ecd1c02e9fea1c684c9698e8ce6a552656ba0871 [21/22] iommu/vt-d, trivial:
clean sparse warnings
config: make ARCH=ia64 defconfig
All error/warnings:
arch/ia64/kernel/built-in.o: In function `pci_iommu_alloc':
(.init.text+0xb541): undefined reference to `intel_dma_ops'
hist_entry__add_cpumode_period() and hist_entry__decay() are dealing
with hist_entry's stat fields only. So make them use the struct
directly.
Acked-by: Jiri Olsa jo...@redhat.com
Cc: Arun Sharma asha...@fb.com
Cc: Frederic Weisbecker fweis...@gmail.com
Signed-off-by: Namhyung Kim
The --children option is for showing accumulated overhead (period)
value as well as self overhead. It should be used with one of -g or
--call-graph option.
Cc: Arun Sharma asha...@fb.com
Cc: Frederic Weisbecker fweis...@gmail.com
Signed-off-by: Namhyung Kim namhy...@kernel.org
---
When callchain accumulation is requested, we need to sort the entries
by accumulated period value. When accumulated periods of two entries
are same (i.e. single path callchain) put the caller above since
accumulation tends to put callers on higher position for obvious
reason.
Cc: Arun Sharma
The --children option is for showing accumulated overhead (period)
value as well as self overhead.
Cc: Arun Sharma asha...@fb.com
Cc: Frederic Weisbecker fweis...@gmail.com
Signed-off-by: Namhyung Kim namhy...@kernel.org
---
tools/perf/Documentation/perf-report.txt | 5 +
There're some duplicate code when adding hist entries. They are
different in that some have branch info or mem info but generally do
same thing. So introduce new struct hist_entry_iter and add callbacks
to customize each case in general way.
The new perf_evsel__add_entry() function will look
Maintain accumulated stat information in hist_entry-stat_acc if
symbol_conf.cumulate_callchain is set. Fields in -stat_acc have same
vaules initially, and will be updated as callchain is processed later.
Cc: Arun Sharma asha...@fb.com
Cc: Frederic Weisbecker fweis...@gmail.com
Signed-off-by:
Hi all
Please find attached bugfix patch for SMACK Linux security module.
This patch fixes following bugs in smack_lsm.c file :
1. In order to remove any SMACK extended attribute from a file, a user should
have CAP_MAC_ADMIN capability.
But user without this capability is able to remove
On Thu, Dec 19, 2013 at 3:34 PM, Boris BREZILLON
b.brezil...@overkiz.com wrote:
GPIO hogging is a way to request and configure specific GPIO without
explicitly requesting it in the device driver.
The request and configuration procedure is handled in the core device
driver code before the
On Wed 08-01-14 16:42:42, Han Pingtian wrote:
If echo -1 /proc/vm/sys/min_free_kbytes, the system will hang.
Changing proc_dointvec() to proc_dointvec_minmax() in the
min_free_kbytes_sysctl_handler() can prevent this to happen.
You can still do echo $BIG_VALUE /proc/vm/sys/min_free_kbytes
On Wed, Jan 08, 2014 at 06:26:30AM +, Sachin Kamat wrote:
Added initial binding documentation for S2MPA01 MFD.
Signed-off-by: Sachin Kamat sachin.ka...@linaro.org
---
Documentation/devicetree/bindings/mfd/s2mpa01.txt | 91
+
1 file changed, 91 insertions(+)
On Mon, Dec 30, 2013 at 10:48 AM, boris brezillon
b.brezil...@overkiz.com wrote:
On 19/12/2013 19:22, Felipe Balbi wrote:
that's quite a weird argument from Linus W, considering you _do_ have a
discrete mux on the board.
We have quite a few of such crazy scenarios here at TI and we were
From: Balaji T K balaj...@ti.com
Some platforms have a PHY hooked up to the
SATA controller. The PHY needs to be initialized
and powered up for SATA to work. We do that
using the PHY framework.
[Roger Q] Cleaned up.
CC: Tejun Heo t...@kernel.org
Signed-off-by: Balaji T K balaj...@ti.com
Hi,
Some platforms have a PHY hooked up to the SATA controller.
The PHY needs to be initialized and powered up for SATA to work.
We do that using the Generic PHY framework in PATCH 2.
In order to support SATA on the OMAP platforms we need to runtime
resume the device before use. PATCH 3 takes
On OMAP platforms the device needs to be runtime resumed before
it can be accessed. The OMAP HWMOD framework takes care of
enabling the module and its resources based on the
device's runtime PM state.
In this patch we runtime resume during .probe() and runtime suspend
during .remove() (i.e.
The ahci_platform driver supports snps,exynos5440-ahci and
ibm,476gtr-ahci. Add this to the DT binding information.
Also add compatible string snps,dwc-ahci, which should be used
for Synopsis Designware SATA cores. e.g. on TI OMAP5 and DRA7 platforms.
Signed-off-by: Roger Quadros rog...@ti.com
On 2013-12-27 04:39, Wang YanQing wrote:
Break out as soon as we find a mapped entry con2fb_map.
Signed-off-by: Wang YanQing udkni...@gmail.com
---
drivers/video/console/fbcon.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/video/console/fbcon.c
On 2013-12-25 16:47, Masami Ichikawa wrote:
kmemleak reported a memory leak as below.
unreferenced object 0x880036ca84c0 (size 16):
comm swapper/0, pid 1, jiffies 4294877407 (age 4434.633s)
hex dump (first 16 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff
On Wed, Jan 08, 2014 at 06:15:38AM +, Roger Quadros wrote:
The omap-usb-host driver expects the 60MHz functional clock
of the USB host module to be named as init_60m_fclk.
Add this information in the DT binding document.
CC: Lee Jones lee.jo...@linaro.org
CC: Samuel Ortiz
Hi Roger,
On Wednesday 08 January 2014 03:17 PM, Roger Quadros wrote:
From: Balaji T K balaj...@ti.com
Some platforms have a PHY hooked up to the
SATA controller. The PHY needs to be initialized
and powered up for SATA to work. We do that
using the PHY framework.
[Roger Q] Cleaned up.
On Wednesday 08 January 2014 15:29:18 Kishon Vijay Abraham I wrote:
+ hpriv-phy = devm_phy_get(dev, sata-phy);
+ if (IS_ERR(hpriv-phy)) {
+ dev_dbg(dev, can't get sata-phy\n);
+ /* return only if -EPROBE_DEFER */
+ if (PTR_ERR(hpriv-phy) ==
On Tue, Jan 07, 2014 at 08:12:39PM +, Stephen Boyd wrote:
On 01/07, Lorenzo Pieralisi wrote:
Not sure this binding (cache node) belongs in cpus.txt
I am working on defining cache bindings for ARM within the C-state
standardization effort:
On Tue, Jan 07, 2014 at 10:50:36PM +, Feng Kan wrote:
Add X-Gene reboot device tree node documentation.
Signed-off-by: Feng Kan f...@apm.com
---
.../devicetree/bindings/arm64/xgene/reboot.txt | 10 ++
1 files changed, 10 insertions(+), 0 deletions(-)
create mode 100644
On Wednesday 08 January 2014 10:05:50 Mark Rutland wrote:
+
+Example:
+
+ reboot@0 {
+ compatible = apm,xgene-reboot;
+ reg = 0x0 0x1714 0x0 0x4;
+ };
Given this seems to be a 64-bit address, the unit address should
preferably be 0,1714
On Wed 08-01-14 08:56:44, Bob Liu wrote:
On Wed, Jan 8, 2014 at 1:30 AM, Michal Hocko mho...@suse.cz wrote:
On Tue 07-01-14 11:22:12, Michal Hocko wrote:
On Tue 07-01-14 13:29:31, Bob Liu wrote:
On Mon, Jan 6, 2014 at 10:18 PM, Michal Hocko mho...@suse.cz wrote:
On Mon 06-01-14
+Tero
Hi Sebastian,
On 01/08/2014 02:38 PM, Sebastian Reichel wrote:
On Wed, Jan 08, 2014 at 11:45:38AM +0530, Roger Quadros wrote:
diff --git a/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
b/Documentation/devicetree/bindings/mfd/omap-usb-host.txt
index b381fa6..5635202 100644
From: Wei Yongjun yongjun_...@trendmicro.com.cn
Fixes the following sparse warning:
sound/soc/ux500/ux500_msp_i2s.c:649:5: warning:
symbol 'ux500_msp_i2s_of_init_msp' was not declared. Should it be static?
Signed-off-by: Wei Yongjun yongjun_...@trendmicro.com.cn
---
On Wednesday 08 January 2014 18:13:35 Wei Yongjun wrote:
From: Wei Yongjun yongjun_...@trendmicro.com.cn
Fixes the following sparse warning:
sound/soc/ux500/ux500_msp_i2s.c:649:5: warning:
symbol 'ux500_msp_i2s_of_init_msp' was not declared. Should it be static?
Signed-off-by: Wei
On Wed 08-01-14 16:20:01, Han Pingtian wrote:
On Mon, Jan 06, 2014 at 05:46:04PM +0100, Michal Hocko wrote:
On Sun 05-01-14 08:35:01, Han Pingtian wrote:
[...]
From f4d085a880dfae7638b33c242554efb0afc0852b Mon Sep 17 00:00:00 2001
From: Han Pingtian ha...@linux.vnet.ibm.com
Date:
This short patch series provides the following improvements
to the RAPL support for perf_events:
- support for RAPL PP1 energy counter
- fix struct perf_event active_list field initialization
The PP1 counter maps to the builtin graphic card for client
processors. that is why it is called
On Tue, Jan 07, 2014 at 06:50:00PM +0100, Linus Walleij wrote:
On Tue, Nov 26, 2013 at 11:05 AM, Mika Westerberg
mika.westerb...@linux.intel.com wrote:
Instead of asking each driver to register to ACPI events we can just call
acpi_gpiochip_register_interrupts() for each chip that has an
2013/11/8 Mark Brown broo...@kernel.org:
On Thu, Nov 07, 2013 at 10:34:06AM +0100, Richard Genoud wrote:
The only speed available was max_speed (the maximum speed declared for a
device).
This patch adds the support for spi_tranfer-speed_hz parameter.
We can now set a different speed for each
This patch fixes a problem with the initialization of the
struct perf_event active_entry field. It is defined inside
an anonymous union and was initialized in perf_event_alloc()
using INIT_LIST_HEAD(). However at that time, we do not know
whether the event is going to use active_entry or
On Wed, Jan 8, 2014 at 11:13 AM, Wei Yongjun weiyj...@gmail.com wrote:
From: Wei Yongjun yongjun_...@trendmicro.com.cn
Fixes the following sparse warning:
sound/soc/ux500/ux500_msp_i2s.c:649:5: warning:
symbol 'ux500_msp_i2s_of_init_msp' was not declared. Should it be static?
1 - 100 of 1544 matches
Mail list logo
