The 'dev' variable in watchdog drivers has a different lifetime than the
watchdog character device and should therefore not be used by watchdog
drivers.
Some of the drivers use the variable to print kernel messages. Those
messages are either dropped or changed to use the parent device.
One driver
The device pointer in struct watchdog_device has a different lifetime
than the driver code and should not be used in drivers. Use the pointer
to the parent device instead.
Signed-off-by: Guenter Roeck
---
v2: Print messages using parent device
drivers/watchdog/gpio_wdt.c |
Stopping a watchdog is a normal operation and does not warrant a log
message.
Signed-off-by: Guenter Roeck
---
v2: No change
drivers/watchdog/bcm2835_wdt.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c
The device pointer in struct watchdog_device has a different lifetime
than the driver code and should not be used in drivers. Use the pointer
to the parent device instead.
Signed-off-by: Guenter Roeck
---
v2: Print messages using parent device
drivers/watchdog/mena21_wdt.c
The device pointer in struct watchdog_device should not be used by drivers
and may be removed in the near future. Use the platform device pointer for
info messages instead.
Signed-off-by: Guenter Roeck
---
v2: No change
drivers/watchdog/tangox_wdt.c | 2 +-
1 file changed,
The 'dev' pointer in struct watchdog_device is set by the watchdog core
when registering the watchdog device and not by the driver. It points to
the watchdog device, not its parent.
Signed-off-by: Guenter Roeck
---
v2: No change
drivers/watchdog/qcom-wdt.c | 1 -
1 file
Arnd Bergmann writes:
> On Tuesday 22 December 2015, Alexander Aring wrote:
>> Later while booting the kernel hangs forever, the solution on my side
>> was to enable:
>>
>> CONFIG_HAVE_ARM_ARCH_TIMER
>>
>> I think this doesn't use the BCM2835 timer anymore and some cortex-a7
>>
Hi Jaegeuk,
> -Original Message-
> From: Chao Yu [mailto:chao2...@samsung.com]
> Sent: Wednesday, December 23, 2015 5:47 PM
> To: 'Jaegeuk Kim'
> Cc: linux-fsde...@vger.kernel.org; linux-kernel@vger.kernel.org;
> linux-f2fs-de...@lists.sourceforge.net
> Subject: Re: [f2fs-dev] [PATCH 4/4]
From: Qiu Peiyang
We hit ftrace_bug report when booting Android on a 64bit ATOM SOC chip.
Basically, there is a race between insmod and ftrace_run_update_code.
After load_module=>ftrace_module_init, another thread jumps in to call
Dmitry Vyukov wrote:
>
> I am testing with your two patches:
> crypto: algif_skcipher - Use new skcipher interface
> crypto: algif_skcipher - Require setkey before accept(2)
> on top of a88164345b81292b55a8d4829fdd35c8d611cd7d (Dec 23).
You sent the email to everyone on the
On Fri, Dec 25, 2015 at 07:54:48AM +0100, Julia Lawall wrote:
> Lines 766, 767 don't look correct at all.
Thanks Julia. I have sent an updated patch in the original thread.
I wonder why I haven't received the original kbuild test robot
email though.
Cheers,
--
Email: Herbert Xu
Hi Chao,
On Thu, Dec 24, 2015 at 06:10:25PM +0800, Chao Yu wrote:
> Sometimes user want to sync all data belong to superblock into storage
> for persistence, 'syncfs' syscall is one option, still f2fs supports
> similar one through ioctl, difference is that sb releted kworker is
> online for
On Thu, 2015-12-24 at 14:20 -0800, Guenter Roeck wrote:
> On 12/24/2015 07:37 AM, Ben Hutchings wrote:
> > This is the start of the stable review cycle for the 3.2.75
> > release.
> > There are 77 patches in this series, which will be posted as
> > responses
> > to this one. If anyone has any
Using __copy_user_nocache() as inspiration create a memory copy
routine for use by kernel code with annotations to allow for
recovery from machine checks.
Notes:
1) We align the source address rather than the destination. This
means we never have to deal with a memory read that spans two
On Thu, Dec 24, 2015 at 01:12:11PM +0100, Mickaël Salaün wrote:
> Fix build error by generating elfcore.o only when ELF_CORE (depending on
> COREDUMP) is selected:
>
> arch/x86/um/built-in.o: In function `elf_core_write_extra_phdrs':
> (.text+0x3e62): undefined reference to `dump_emit'
>
On 12/23, Remi Pommarel wrote:
> On Sun, Dec 06, 2015 at 05:22:45PM +0100, Remi Pommarel wrote:
> > Hi,
> >
> > This patchset adds support for pwm clock. At boot, this clock does not have
> > a
> > default parent nor a default rate set. Thus we should be able to change its
> > parent to get this
When a module is loaded, current ftrace initialization around the new module
has some issues.
1) ftrace might race with insmod: Just after load_module calls
ftrace_module_init to add ftrace records of the module, ftrace_run_update_code
might jump in to change module codes. But load_module calls
Implement online check or fix inode block during
reading a inode block to memory.
Signed-off-by: Gang He
---
fs/ocfs2/inode.c | 200 +++--
fs/ocfs2/ocfs2_trace.h | 2 +
2 files changed, 196 insertions(+), 6 deletions(-)
diff
Implement online file check sysfile interfaces, e.g.
how to create the related sysfile according to device name,
how to display/handle file check request from the sysfile.
Signed-off-by: Gang He
---
fs/ocfs2/Makefile| 3 +-
fs/ocfs2/filecheck.c | 605
Export ocfs2_kset object from ocfs2_stackglue kernel module,
then online file check code will create the related sysfiles
under ocfs2_kset object.
Signed-off-by: Gang He
---
fs/ocfs2/stackglue.c | 3 ++-
fs/ocfs2/stackglue.h | 2 ++
2 files changed, 4 insertions(+), 1 deletion(-)
Create online file check sysfile when ocfs2 mount,
remove the related sysfile when ocfs2 umount.
Signed-off-by: Gang He
---
fs/ocfs2/super.c | 5 +
1 file changed, 5 insertions(+)
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 2de4c8a..5ef88b8 100644
---
When there are errors in the ocfs2 filesystem,
they are usually accompanied by the inode number which caused the error.
This inode number would be the input to fixing the file.
One of these options could be considered:
A file in the sys filesytem which would accept inode numbers.
This could be
On Tue, Dec 15, 2015 at 05:30:49PM -0800, Tony Luck wrote:
> Using __copy_user_nocache() as inspiration create a memory copy
> routine for use by kernel code with annotations to allow for
> recovery from machine checks.
>
> Notes:
> 1) We align the source address rather than the destination. This
Michael Turquette writes:
> On Fri, Dec 18, 2015 at 8:19 PM, Rob Herring wrote:
>> On Tue, Dec 15, 2015 at 03:35:57PM -0800, Eric Anholt wrote:
>>> These will be used for enabling UART1, SPI1, and SPI2.
>>>
>>> Signed-off-by: Eric Anholt
On 12/23/2015 04:59 PM, Florian Westphal wrote:
> Junxiao Bi wrote:
>> The following panic happened when I run ocfs2-test on linux-next. Kernel
>> config is attached.
>>
>> [64910.905501] BUG: unable to handle kernel NULL pointer dereference at
>> (null)
>>
Hi Jaegeuk,
> -Original Message-
> From: Jaegeuk Kim [mailto:jaeg...@kernel.org]
> Sent: Friday, December 25, 2015 5:52 AM
> To: Chao Yu
> Cc: linux-fsde...@vger.kernel.org; linux-kernel@vger.kernel.org;
> linux-f2fs-de...@lists.sourceforge.net
> Subject: Re: [f2fs-dev] [PATCH 3/4] f2fs:
-to-be-exported-on-proc-atags/20151224-220541
base: https://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
for-next
config: arm-allyesconfig (attached as .config)
reproduce:
wget
https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross
-O ~/bin
Extend the severity checking code to add a new context IN_KERN_RECOV
which is used to indicate that the machine check was triggered by code
in the kernel with a fixup entry.
Add code to check for this situation and respond by altering the return
IP to the fixup address.
Major re-work to the tail
Copy the existing page fault fixup mechanisms to create a new table
to be used when fixing machine checks. Note:
1) At this time we only provide a macro to annotate assembly code
2) We assume all fixups will in code builtin to the kernel.
3) Only for x86_64
4) New code under
Ingo: I think I have fixed up everything to make all the people who
commented happy. Do you have any further suggestions, or is this ready
to go into the tip tree?
This series is initially targeted at the folks doing filesystems
on top of NVDIMMs. They really want to be able to return -EIO
when
On 24 December 2015 at 19:51, Guenter Roeck wrote:
> I can not get the available dtb files for realview (arm-realview-pb1176.dtb
> and arm-realview-pb11mp.dtb) to work with anything I tried.
This is because QEMU does not model either of these two boards.
thanks
-- PMM
--
On Thu, Dec 24, 2015 at 01:09:45PM +0100, Mickaël Salaün wrote:
>
> On 23/12/2015 22:42, Josh Triplett wrote:
> > On Wed, Dec 23, 2015 at 01:59:13PM +0100, Mickaël Salaün wrote:
> >> Fix build error by selecting COREDUMP when X86_32 is selected:
> >>
> >> arch/x86/um/built-in.o: In function
[if your patch is applied to the wrong git tree, please drop us a note to help
improving the system]
Hi Shraddha,
[auto build test WARNING on staging/staging-testing]
[also build test WARNING on v4.4-rc6 next-20151223]
url:
Fix a double mutex_unlock() issue where acpi_initialize_debugger() is
called with the mutex already unlocked.
Reported-by: Dan Carpenter
Signed-off-by: Lv Zheng
---
drivers/acpi/acpi_dbg.c |3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
LGTM.
On Thu, 2015-12-24 at 15:37 +, Ben Hutchings wrote:
> 3.2.75-rc1 review patch. If anyone has any objections, please let me
> know.
>
> --
>
> From: David Turner
>
> commit a4dad1ae24f850410c4e60f22823cba1289b8d52 upstream.
>
> In ext4, the
Sudip Mukherjee writes:
> We were getting build warning:
>
> drivers/gpu/drm/vc4/vc4_validate.c: In function 'validate_gl_shader_rec':
> drivers/gpu/drm/vc4/vc4_validate.c:864:4:
> warning: format '%d' expects argument of type 'int', but argument 4 has type
>
> -Original Message-
> From: Jaegeuk Kim [mailto:jaeg...@kernel.org]
> Sent: Friday, December 25, 2015 4:16 AM
> To: Chao Yu
> Cc: linux-kernel@vger.kernel.org; linux-fsde...@vger.kernel.org;
> linux-f2fs-de...@lists.sourceforge.net
> Subject: Re: [f2fs-dev] [PATCH 2/4] f2fs: return early
If link is broken, its len is zero, and we don't need to move forward.
Signed-off-by: Jaegeuk Kim
---
fs/f2fs/namei.c | 10 --
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c
index fb41c80..5cc4128 100644
---
Hi Chao,
On Fri, Dec 25, 2015 at 09:18:06AM +0800, Chao Yu wrote:
> Hi Jaegeuk,
>
> > -Original Message-
> > From: Jaegeuk Kim [mailto:jaeg...@kernel.org]
> > Sent: Friday, December 25, 2015 5:52 AM
> > To: Chao Yu
> > Cc: linux-fsde...@vger.kernel.org; linux-kernel@vger.kernel.org;
> >
Possibly, provider driver initialization is later than
consumer driver. Use function subsys_initcall to initialize
NVMEM provider early to ensure NVMEM consumer doesn't need
to -EPROBE_DEFER.
Signed-off-by: Andrew-CT Chen
---
drivers/nvmem/mtk-efuse.c | 23
From: Qiu Peiyang
We hit ftrace_bug report when booting Android on a 64bit ATOM SOC chip.
Basically, there is a race between insmod and ftrace_run_update_code.
After load_module=>ftrace_module_init, another thread jumps in to call
From: Qiu Peiyang
complete_formation might fail. kernel need clean up
ftrace records of the module.
The patch fixes it by tuning the operation sequence in
complete_formation. After complete_formation checks
verify_export_symbols, call ftrace_module_init to init
ftrace
On Thu, 2015-12-24 at 20:58 +0100, Borislav Petkov wrote:
> On Thu, Dec 24, 2015 at 10:08:57AM -0700, Toshi Kani wrote:
> > As for checkpatch, I noticed that commit 9c0ece069b3 removed "feature
> > -removal.txt" file, and checkpatch removed this check in commit
> > 78e3f1f01d2. checkpatch does
Hi Chao,
On Thu, Dec 24, 2015 at 12:33:50PM -0800, Jaegeuk Kim wrote:
> Hi Chao,
>
> On Thu, Dec 24, 2015 at 01:50:32PM +0800, Chao Yu wrote:
> > Hi Jaegeuk,
> >
> > > -Original Message-
> > > From: Jaegeuk Kim [mailto:jaeg...@kernel.org]
> > > Sent: Thursday, December 24, 2015 10:15 AM
Hi Xing,
在 2015年12月23日 17:19, Xing Zheng 写道:
This patch describe the emac, and we need to let mac clock under
the APLL which is able to provide the accurate 50MHz what mac_ref
need.
Signed-off-by: Xing Zheng
---
arch/arm/boot/dts/rk3036-evb.dts | 25
This patch series adds check if Dell WMI descriptor structure is valid and
fixes processing WMI events on devices with WMI interface version 0.
After testing, second patch is good candidate for backporting into stable
kernels, but problem is that it cannot be used without first patch. So I
let
On Thu, Dec 24, 2015 at 1:18 PM, Pali Rohár wrote:
> According to Dell WMI document mentioned in ML dicussion archived at
> http://www.spinics.net/lists/platform-driver-x86/msg07220.html OS should
> check Dell WMI descriptor structure. Structure also provide Dell WMI
>
BIOS/ACPI on devices with WMI interface version 0 does not clear buffer
before filling it. So next time when BIOS/ACPI send WMI event which is
smaller as previous then it contains garbage in buffer from previous event.
BIOS/ACPI on devices with WMI interface version 1 clears buffer and
sometimes
According to Dell WMI document mentioned in ML dicussion archived at
http://www.spinics.net/lists/platform-driver-x86/msg07220.html OS should
check Dell WMI descriptor structure. Structure also provide Dell WMI
interface version which is used later.
Signed-off-by: Pali Rohár
On 12/24/2015 07:37 AM, Ben Hutchings wrote:
This is the start of the stable review cycle for the 3.2.75 release.
There are 77 patches in this series, which will be posted as responses
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made
-socs/20151224-192624
base: https://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git next
config: powerpc-mpc837x_rdb_defconfig (attached as .config)
reproduce:
wget
https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross
-O ~/bin/make.cross
chmod
ert,
>
> [auto build test WARNING on crypto/master]
> [also build test WARNING on next-20151223]
> [cannot apply to v4.4-rc6]
>
> url:
> https://github.com/0day-ci/linux/commits/Herbert-Xu/crypto-algif_skcipher-Require-setkey-before-accept-2/20151224-174142
> base:
>
On Sat, Dec 19, 2015 at 12:34:31AM +0800, Geliang Tang wrote:
> Use list_for_each_entry() instead of list_for_each() to simplify
> the code.
>
> Signed-off-by: Geliang Tang
> ---
> drivers/usb/chipidea/debug.c | 5 +
> 1 file changed, 1 insertion(+), 4 deletions(-)
>
>
On Thu, Dec 24, 2015 at 4:06 AM, Tetsuo Handa
wrote:
> Michal Hocko wrote:
>> This is VM_BUG_ON_PAGE(page_mapped(page), page), right? Could you attach
>> the full kernel log? It all smells like a race when OOM reaper tears
>> down the mapping and there is a
Using __copy_user_nocache() as inspiration create a memory copy
routine for use by kernel code with annotations to allow for
recovery from machine checks.
Notes:
1) We align the source address rather than the destination. This
means we never have to deal with a memory read that spans two
您好:
您还在用ali平台开发外贸客户?
还在使用展会宣传企业和产品?
你out了!!!
当前外贸客户开发难,您是否也在寻找展会,B2B之外好的渠道?
行业全球十几万客户,平时最多也就联系了三千家,您是否想把剩下的也开发到?
加QQ2652697913给您演示下主动开发客户的方法,先用先受益,已经有近万家企业领先您使用!!。
广东省商业联合会推荐,主动开发客户第一品牌,近万家企业正在获益。您可以没有使用,但是不能没有了解。
--
To unsubscribe from this list: send the line
This patch adds support for controlling keyboard backlight via standard
linux led class interface (::kbd_backlight). It uses ACPI HKEY device with
MLCG and MLCS methods.
Signed-off-by: Pali Rohár
Tested-by: Fabio D'Urso
---
* Pali Rohár [151224 09:48]:
> On Thursday 24 December 2015 17:37:55 Ivaylo Dimitrov wrote:
> > So it can be used by code outside arch/arm/kernel/. Fix save_atags()
> > declaration to match its definition while at it.
> >
> > Signed-off-by: Ivaylo Dimitrov
* Pali Rohár [151224 09:49]:
> On Thursday 24 December 2015 17:37:56 Ivaylo Dimitrov wrote:
> > Nokia N900 (RX51) legacy userspace needs various ATAGS passed by the
> > bootloader (boot reason, device serial, boot mode, various GPIO
> > swithes, etc). Save that data early
On Monday 06 July 2015 22:26:09 Pali Rohár wrote:
> With this patch "/revision" DT entry is used to set global system_rev
> variable. DT "/revision" is expected to be u32 numeric value.
>
> TODO: add documentation
>
> Signed-off-by: Pali Rohár
> ---
>
On 24.12.2015 20:53, Tony Lindgren wrote:
* Pali Rohár [151224 09:48]:
On Thursday 24 December 2015 17:37:55 Ivaylo Dimitrov wrote:
So it can be used by code outside arch/arm/kernel/. Fix save_atags()
declaration to match its definition while at it.
Signed-off-by:
On Wed, Dec 23, 2015 at 09:27:28AM -0700, Mathieu Poirier wrote:
> On 19 December 2015 at 10:13, Rabin Vincent wrote:
> > It should presumably be using pm_runtime_put() instead.
>
> That's a first - what platform did you test on? If I send you fixes
> will you be able to help me
The newest event can be SYN_REPORT in case of dropping all old events when
buffer is full, but as now there is no device data available to read so
lets drop SYN_REPORT as well and store only SYN_DROPPED.
Signed-off-by: Aniroop Mathur
---
drivers/input/evdev.c | 17
On Thu, Dec 24, 2015 at 07:12:53PM +0100, Paul Kocialkowski wrote:
> Le mercredi 23 décembre 2015 à 11:56 +, Mark Brown a écrit :
> > This isn't really adding support for the enable GPIO as the changelog
> > suggests, it's requesting but not managing the GPIO. Since there is
> > core support
On Tue, Dec 22, 2015 at 10:54 PM, kernel test robot
wrote:
> FYI, we noticed the below changes on
>
> https://git.kernel.org/pub/scm/linux/kernel/git/yinghai/linux-yinghai.git
> for-pci-v4.5-next
> commit 09b7f22ba7bc2c45f7b2b1588c17d5264dc571f4 ("resources: Make
>
Hi,
Le mercredi 23 décembre 2015 à 13:03 -0300, Javier Martinez Canillas a
écrit :
> Hello Paul,
>
> [snip]
>
> > +
> > +_pmx_core {
> > + pinctrl-names = "default";
> > +
> > + uart3_pins: pinmux_uart3_pins {
> > + pinctrl-single,pins = <
> > +
Hi,
Le mercredi 23 décembre 2015 à 07:44 -0800, Tony Lindgren a écrit :
> * Paul Kocialkowski [151223 03:00]:
> > + {
> > + ti,no-reset-on-init;
> > +};
> > +
> > + {
> > + ti,no-reset-on-init;
> > +};
> > +
> > + {
> > + ti,no-reset-on-init;
> > +};
> > +
> > + {
> > +
>> A single call of the fprintf() function is sufficient for the desired
>> display of the usage information.
>
> This seems like churn that doesn't actually fix anything.
Will it matter occasionally to reduce the number of function calls
by combining several text fragments into the passing of
Hi Arnd,
On 12/24/2015 01:58 AM, Arnd Bergmann wrote:
On Thursday 24 December 2015, Guenter Roeck wrote:
Hi all,
various versatile and realview configurations fail to run for me with
qemu (2.5) in linux-next. Some of those are qemu configurations
I collected from various sources, so I guess I
On Thu, Dec 24, 2015 at 10:08:57AM -0700, Toshi Kani wrote:
> As for checkpatch, I noticed that commit 9c0ece069b3 removed "feature
> -removal.txt" file, and checkpatch removed this check in commit
> 78e3f1f01d2. checkpatch does not have such check since then. So, I am
> inclined not to add this
Le jeudi 24 décembre 2015 à 19:35 +, Mark Brown a écrit :
> On Thu, Dec 24, 2015 at 07:12:53PM +0100, Paul Kocialkowski wrote:
> > Le mercredi 23 décembre 2015 à 11:56 +, Mark Brown a écrit :
>
> > > This isn't really adding support for the enable GPIO as the changelog
> > > suggests,
On 12/21/2015 04:14 PM, Christoph Lameter wrote:
> On Mon, 21 Dec 2015, Sasha Levin wrote:
>
>> > I've also noticed a new warning from the workqueue code which my scripts
>> > didn't pick up before:
>> >
>> > [ 3462.380681] BUG: workqueue lockup - pool cpus=2 node=2 flags=0x4 nice=0
>> > stuck
On Thu, Dec 24, 2015 at 01:49:24PM +0800, Chao Yu wrote:
> Hi Jaegeuk,
>
> > -Original Message-
> > From: Jaegeuk Kim [mailto:jaeg...@kernel.org]
> > Sent: Thursday, December 24, 2015 10:15 AM
> > To: linux-kernel@vger.kernel.org; linux-fsde...@vger.kernel.org;
> >
Surface Pro 4 button is managed by a device with _HID "MSHW0040"
different from Surface Pro 3.
This commit adds MSHW0040 to id list to Support Surface Pro 4, and
rename the driver to surfacepro_button accordingly.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109871
Signed-off-by: Weng
Hi Chao,
On Thu, Dec 24, 2015 at 01:50:32PM +0800, Chao Yu wrote:
> Hi Jaegeuk,
>
> > -Original Message-
> > From: Jaegeuk Kim [mailto:jaeg...@kernel.org]
> > Sent: Thursday, December 24, 2015 10:15 AM
> > To: linux-kernel@vger.kernel.org; linux-fsde...@vger.kernel.org;
> >
On Thu, Dec 24, 2015 at 2:47 AM, Michal Hocko wrote:
> On Wed 23-12-15 16:00:09, Ross Zwisler wrote:
> [...]
>> While running xfstests on next-20151223 I hit a pair of kernel BUGs
>> that bisected to this commit:
>>
>> 1eb3a80d8239 ("mm, oom: introduce oom reaper")
>
> Thank
all,
I have started seeing a "Bad rss-counter" message in the logs with
the latest linux-next 20151222+.
[ 458.282192] BUG: Bad rss-counter state mm:8800c5a96000 idx:3 val:3894
I can test patches if anyone has any ideas.
--
- Jeremiah Mahler
--
To unsubscribe from this list: send the
Technologic Systems provides an IP compatible with the SJA1000,
instantiated in an FPGA. Because of some bus widths issue, access to
registers is made through a "window" that works like this:
base + 0x0: address to read/write
base + 0x2: 8-bit register value
This commit adds a new
On Thursday 24 December 2015 17:37:55 Ivaylo Dimitrov wrote:
> So it can be used by code outside arch/arm/kernel/. Fix save_atags()
> declaration to match its definition while at it.
>
> Signed-off-by: Ivaylo Dimitrov
Tested-by: Pali Rohár
--
On Thursday 24 December 2015 17:37:56 Ivaylo Dimitrov wrote:
> Nokia N900 (RX51) legacy userspace needs various ATAGS passed by the
> bootloader (boot reason, device serial, boot mode, various GPIO
> swithes, etc). Save that data early enough in the boot process, so
> it can be exported later in
>> The close() function could be called by the main() function even if
>> the passed variable "cfd" was assigned a negative value.
…
> This seems more easily fixed by simply making the condition > 0.
How do you think about the reuse of the error predicate "cfd != -1"
for the return value from a
2015-12-21 21:06 GMT+01:00 Dmitry Torokhov :
> On Sun, Dec 20, 2015 at 01:49:25PM +0100, Pavel Rojtberg wrote:
>> 2015-12-20 8:55 GMT+01:00 Dmitry Torokhov :
>> > On Sat, Dec 19, 2015 at 10:17:09PM +0100, Clement Calmels wrote:
>> >> On Wed, 16
Le mercredi 23 décembre 2015 à 11:56 +, Mark Brown a écrit :
> On Wed, Dec 23, 2015 at 11:58:37AM +0100, Paul Kocialkowski wrote:
>
> > + gpio = lp->pdata->enable_gpio;
> > + if (!gpio_is_valid(gpio))
> > + return 0;
> > +
> > + /* Always set enable GPIO high. */
> > + ret =
On Wed, 2015-12-23 at 19:23 -0700, Toshi Kani wrote:
> On Wed, 2015-12-23 at 15:23 +0100, Borislav Petkov wrote:
> > On Tue, Dec 22, 2015 at 01:04:32PM -0700, Toshi Kani wrote:
> :
> > > I agree that we can add new interfaces with the type check. This
> > > 'type'
> > > may need some
Please pull to get the following sparc bug fixes:
1) Finally make perf stack backtraces stable on sparc, several
problems (mostly due to the context in which the user copies
from the stack are done) contributed to this.
From Rob Gardner.
2) Export ADI capability if the cpu supports
This commit adds the capability to allocate and init private data
embedded in the sja1000_priv structure on a per-compatible basis. The
device node is passed as a parameter of the init callback to allow
parsing of custom device tree properties.
Signed-off-by: Damien Riegel
This commit adds documentation for the Technologic Systems version of
SJA1000. The difference with the NXP version is in the way the registers
are accessed.
Signed-off-by: Damien Riegel
---
Documentation/devicetree/bindings/net/can/sja1000.txt | 3 ++-
1 file
This patchset introduces support for the technologic version of the
SJA1000. Access to IP's registers are proxied through a window,
requiring two bus accesses to read or write a register. These accesses
must be protected by a spinlock to prevent race conditions. Currently,
there is no easy way to
Signed-off-by: Moritz Fischer
---
drivers/base/power/domain.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index 65f50ec..53e81ac 100644
--- a/drivers/base/power/domain.c
+++
From: Shraddha Barke
Remove support for One Laptop Per Child organization since it is dead.
http://www.olpcnews.com/about_olpc_news/goodbye_one_laptop_per_child.html
Signed-off-by: Shraddha Barke
---
Changes in v2-
Added mailing list and other
On Wed, Dec 2, 2015 at 2:39 AM, Krzysztof Kozlowski
wrote:
> The following changes since commit 8005c49d9aea74d382f474ce11afbbc7d7130bec:
>
> Linux 4.4-rc1 (2015-11-15 17:00:27 -0800)
>
> are available in the git repository at:
>
>
>From bc1e491b29d9199f16c6e002a69f9377677b93af Mon Sep 17 00:00:00 2001
From: "yj84.jang"
Date: Wed, 16 Dec 2015 08:52:47 +0900
Subject: [PATCH] Move the judgement of timeout into
mmc_switch_status_error()
__mmc_switch() is possible to misjudge error.
Although
2015-12-24 0:35 GMT+03:00 Roman Volkov :
> From: Roman Volkov
>
> vt8500 hangs in nanosleep() function, starting from commit
> c6eb3f70d4482806dc2d3e1e3c7736f497b1d418, making the system unusable.
> Per investigation, looks like set_next_event() now receives too
On 12/24/2015 05:11 PM, Xiao Guangrong wrote:
On 12/24/2015 04:36 PM, Kai Huang wrote:
On 12/23/2015 07:25 PM, Xiao Guangrong wrote:
Now, all non-leaf shadow page are page tracked, if gfn is not tracked
there is no non-leaf shadow page of gfn is existed, we can directly
make the shadow
Hi,
Before send the patch at mailing list, you need to make the patch as mainline
style.
Maybe..maintainer should not review this patch.
Refer to "Linux kernel coding style" and "submitting Patches".
Also set your email environment. (Documentation/email-clients.txt)
Best Regards,
Jaehoon
(resend for messy code)
Hi, Andy
> -Original Message-
> From: Andy Lutomirski [mailto:l...@amacapital.net]
> Sent: Thursday, December 24, 2015 9:40 AM
> To: Zheng, Lv
> Cc: Chen, Yu C; Moore, Robert; Wysocki, Rafael J; Brown, Len; Andy
> Lutomirski; Lv Zheng; linux-kernel@vger.kernel.org;
On Wed, 2015-12-23 at 12:00 +, Mark Brown wrote:
> On Wed, Dec 23, 2015 at 06:16:08PM +0800, Henry Chen wrote:
>
> Please fix your mail client to word wrap within paragraphs at something
> substantially less than 80 columns. Doing this makes your messages much
> easier to read and reply to.
On 12/23/2015 07:25 PM, Xiao Guangrong wrote:
Now, all non-leaf shadow page are page tracked, if gfn is not tracked
there is no non-leaf shadow page of gfn is existed, we can directly
make the shadow page of gfn to unsync
Signed-off-by: Xiao Guangrong
---
Hi Calvin,
[auto build test ERROR on net-next/master]
[also build test ERROR on v4.4-rc6 next-20151223]
url:
https://github.com/0day-ci/linux/commits/Calvin-Owens/vxlan-Properly-depend-on-ipv6-and-revert-to-module_init/20151224-070557
config: i386-randconfig-b0-12241357 (attached as .config
On Wed, Dec 23, 2015 at 10:46 PM, Ross Zwisler
wrote:
> Commit ef7c7553039b ("gpiolib: improve overlap check of range of gpio")
> introduced the following compiler warning:
>
> drivers/gpio/gpiolib.c: In function ‘gpiochip_add’:
> drivers/gpio/gpiolib.c:193:20:
1 - 100 of 678 matches
Mail list logo