On 29/01/2014 17:08, Michal Suchanek wrote:
On 29 January 2014 16:43, boris brezillon dev wrote:
Hello Michal,
On 29/01/2014 16:11, Michal Suchanek wrote:
On 13 January 2014 10:02, boris brezillon wrote:
boot 0 part properties:
- uses sequential ECC
- uses 1024 bytes ECC blocks
- boot0
On 29 January 2014 16:43, boris brezillon dev wrote:
> Hello Michal,
>
>
> On 29/01/2014 16:11, Michal Suchanek wrote:
>>
>> On 13 January 2014 10:02, boris brezillon wrote:
>>>
>>>
>>> boot 0 part properties:
>>> - uses sequential ECC
>>> - uses 1024 bytes ECC blocks
>>> - boot0 code is stored
Hello Michal,
On 29/01/2014 16:11, Michal Suchanek wrote:
On 13 January 2014 10:02, boris brezillon wrote:
Hi Henrik,
On 11/01/2014 22:11, Henrik Nordström wrote:
thanks for pointing out your documents
I'm trying to get the NAND driver with HW ECC (and HW RND)
without using DMA at all
I
On 13 January 2014 10:02, boris brezillon wrote:
> Hi Henrik,
>
>
> On 11/01/2014 22:11, Henrik Nordström wrote:
>>
>> thanks for pointing out your documents
>> I'm trying to get the NAND driver with HW ECC (and HW RND)
>> without using DMA at all
>>
>> I tried many things but did not quite get
On 13 January 2014 10:02, boris brezillon b.brezil...@overkiz.com wrote:
Hi Henrik,
On 11/01/2014 22:11, Henrik Nordström wrote:
bbrezillon thanks for pointing out your documents
bbrezillon I'm trying to get the NAND driver with HW ECC (and HW RND)
without using DMA at all
I tried many
Hello Michal,
On 29/01/2014 16:11, Michal Suchanek wrote:
On 13 January 2014 10:02, boris brezillon b.brezil...@overkiz.com wrote:
Hi Henrik,
On 11/01/2014 22:11, Henrik Nordström wrote:
bbrezillon thanks for pointing out your documents
bbrezillon I'm trying to get the NAND driver with HW
On 29 January 2014 16:43, boris brezillon dev b.brezillon@gmail.com wrote:
Hello Michal,
On 29/01/2014 16:11, Michal Suchanek wrote:
On 13 January 2014 10:02, boris brezillon b.brezil...@overkiz.com wrote:
boot 0 part properties:
- uses sequential ECC
- uses 1024 bytes ECC blocks
-
On 29/01/2014 17:08, Michal Suchanek wrote:
On 29 January 2014 16:43, boris brezillon dev b.brezillon@gmail.com wrote:
Hello Michal,
On 29/01/2014 16:11, Michal Suchanek wrote:
On 13 January 2014 10:02, boris brezillon b.brezil...@overkiz.com wrote:
boot 0 part properties:
- uses
tis 2014-01-21 klockan 19:13 +0100 skrev Henrik Nordström:
> > Are you sure ?
> > This thread says that only the first 1024 bytes of data (+ 96 bytes of
> > ECC) of each page are used:
>
> yes I am sure. There was no page access commands between the sectors,
> only linear read of
lör 2014-01-18 klockan 05:46 -0800 skrev Boris BREZILLON:
> Do you know which mode are used (X ECC strength / 512 or 1024 bytes ?)
> and
> when they are are selected (does it depend on the connected NAND
> chip ?) ?
It seems to blindly try some modes until something usable is found.
Varying
lör 2014-01-18 klockan 05:46 -0800 skrev Boris BREZILLON:
Do you know which mode are used (X ECC strength / 512 or 1024 bytes ?)
and
when they are are selected (does it depend on the connected NAND
chip ?) ?
It seems to blindly try some modes until something usable is found.
Varying both
tis 2014-01-21 klockan 19:13 +0100 skrev Henrik Nordström:
Are you sure ?
This thread says that only the first 1024 bytes of data (+ 96 bytes of
ECC) of each page are used:
yes I am sure. There was no page access commands between the sectors,
only linear read of data,ecc,data,ecc.
Hmm..
mån 2014-01-13 klockan 10:02 +0100 skrev boris brezillon:
> The most complicated part is the boot0 partition.
Not really. It's only a little different (sequential ECC, static
randomizer seed on every page).
> Tell me if I'm wrong, but here's what I understood from your work (and
> yuq's work
Hi Henrik,
On 11/01/2014 22:11, Henrik Nordström wrote:
thanks for pointing out your documents
I'm trying to get the NAND driver with HW ECC (and HW RND)
without using DMA at all
I tried many things but did not quite get the ECC reading command to
return meaningful resuts. But should work
Hi Henrik,
On 11/01/2014 22:11, Henrik Nordström wrote:
bbrezillon thanks for pointing out your documents
bbrezillon I'm trying to get the NAND driver with HW ECC (and HW RND)
without using DMA at all
I tried many things but did not quite get the ECC reading command to
return meaningful
mån 2014-01-13 klockan 10:02 +0100 skrev boris brezillon:
The most complicated part is the boot0 partition.
Not really. It's only a little different (sequential ECC, static
randomizer seed on every page).
Tell me if I'm wrong, but here's what I understood from your work (and
yuq's work
16 matches
Mail list logo