Hello Morimoto-san,
On Mon, 2 Mar 2009, morimoto.kunin...@renesas.com wrote:
> Dear Guennadi, Mauro, Paul
>
> Mauro, Guennadi
> When does following patch will be applyed ?
>
> > 07/14: ov772x: Add image flip support
> > http://linuxtv.org/hg/~gliakhovetski/v4l-dvb?cmd=changeset;node=859f610843c
Dear Guennadi, Mauro, Paul
Mauro, Guennadi
When does following patch will be applyed ?
> 07/14: ov772x: Add image flip support
> http://linuxtv.org/hg/~gliakhovetski/v4l-dvb?cmd=changeset;node=859f610843c1
Because ALGO board (SH7723) needs platform patch.
And
> 09/14: sh_mobile_ceu: SOCAM flag
Mauro,
Please pull from
http://linuxtv.org/hg/~awalls/cx18
for the following
cx18: Add interlock so sliced VBI insertion only happens for an MPEG PS
cx18: Fix VPS service register code and ensure VBI consistentcy with ivtv
cx18: Correct comments about vertical and horizontal blanking timings
cx
Hello,
Besides the patch I've posted couple of hours ago, there is one more
thing in omap3 ispccdc.c.
According to omap3 datasheet, PACK8 could be enabled only when
CCDC_SYN_MODE is with CCIR-656 mode.
If you try to use external camera module with ITU-R.601 mode without
this patch, you could face
Hello.
Since I was working on omap3 and external ISP device, I found some
hard coded thing in camera interface codes which make dependency on
sensor or ISP device. With that code, we cannot make omap3 camera
interface driver generic for every target board.
It makes dependency on camera device mou
Hans,
Below is a patch for libv4lconvert, to support the decompression used by
the SQ905C cameras (0x2770:0x905C) and some other related cameras. There
is at the moment no support module for these cameras in streaming mode,
but I intend to submit one.
This contribution was created in whole b
On 22/02/2009, Hans Verkuil wrote:
>
> Should we drop support for kernels <2.6.22 in our v4l-dvb repository?
YES
> Optional question:
>
> Why:
I'm not going to repeat everything again, but i'd like to know that
most of the developer's time to code is used adding new features or
improving the
Any update on the status of analouge for this card? I really would
like to switch back to Linux as my mce solution, but last time I did,
the analouge was terrible, and I was getting no answers on the list...
Thanks,
Dustin Coates
Sent from my iPhone
On Mar 1, 2009, at 10:36 AM, David Woitko
Am Sat, 28 Feb 2009 15:29:24 +0100
schrieb Markus Rechberger :
> On Sat, Feb 28, 2009 at 3:20 PM, Henrik Beckman
> wrote:
> > Hi,
> >
> > Can anyone verify if the Cinergy HTC USB XS HD is working in DVB-C
> > mode ?
> > http://www.terratec.net/en/products/technical-data/produkte_technische_daten_
Hi Trent,
On Sun, 1 Mar 2009 10:24:08 -0800 (PST), Trent Piepho wrote:
> On Sun, 1 Mar 2009, Hans Verkuil wrote:
> > > Even though kmalloc supports higher order allocations now, they can
> > > easily fail.
> >
> > The right approach which most drivers take is to allocate up front when the
> > driv
Hi all,
Hans Verkuil schrieb:
So here is a quick poll, please reply either to the list or directly to me
with your yes/no answer and (optional but welcome) a short explanation to
your standpoint. It doesn't matter if you are a user or developer, I'd like
to see your opinion regardless.
Pleas
On Sun, 2009-03-01 at 10:24 -0800, Trent Piepho wrote:
> On Sun, 1 Mar 2009, Hans Verkuil wrote:
> > > Even though kmalloc supports higher order allocations now, they can
> > > easily fail.
> >
> > The right approach which most drivers take is to allocate up front when the
> > driver is loaded. Zor
[Reposted from linux-dvb because mailman told me linux-dvb is to be
replaced with linux-media. If you've already read this, just skip.]
Hi out there
I'm in the unfortunate position of having bought a 900H instead of a 900
and now I'm fiddling with the driver.
Details:
$ lsusb | grep Hauppau
(This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.)
Results of the daily build of v4l-dvb:
date:Sun Mar 1 19:00:04 CET 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 10778:c770b20d15c6
gcc version: gcc
[Reposted from linux-dvb because mailman told me linux-dvb is to be
replaced with linux-media. If you've already read this, just skip.]
Hi out there
I'm in the unfortunate position of having bought a 900H instead of a 900
and now I'm fiddling with the driver.
Details:
$ lsusb | grep Hauppaug
On Sun, 1 Mar 2009, Hans Verkuil wrote:
> > Even though kmalloc supports higher order allocations now, they can
> > easily fail.
>
> The right approach which most drivers take is to allocate up front when the
> driver is loaded. Zoran should be modified to do the same.
Still, it's a shame to waste
Mauro,
Please pull from:
http://linuxtv.org/hg/~mkrufky/sms1xxx
for the following:
- smsusb: whitespace cleanups
- smscore: whitespace cleanups
- smsusb: add autodetection for "nice" and "venice" boards
sms-cards.c |8 +
sms-cards.h |2
smscoreapi.c | 138 --
smscor
On Sunday 01 March 2009 15:38:03 Trent Piepho wrote:
> On Sun, 22 Feb 2009, Hans Verkuil wrote:
> > Please pull from http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-zoran for
> > the following:
>
> I have some questions about your changes.
>
> > - zoran: convert to video_ioctl2 and remove 'ready_to_be_
Mauro,
Please pull from:
http://linuxtv.org/hg/~mkrufky/mxl5007t
for the following:
- mxl5007t: remove analog tuning code
- mxl5007t: remove function mxl5007t_check_rf_input_power
- mxl5007t: mxl5007t_get_status should report if tuner is locked
- mxl5007t: warn when unknown revisions are detect
Hi Anders and others,
I have already tried to create a module for my webcam (Topro TP6800).
It have the same usb id (06a2:0003).
But I have the same problem as you about the image data. I don't know
what is the comment tag (FF:FE). I tried to skip the tag or to skip
the comment with the length aft
On Sun, 22 Feb 2009, Hans Verkuil wrote:
> Also the v4l1 ioctls have been removed and instead zoran relies on the v4l1
> compat layer.
I tried testing v4l1 with mplayer and it doesn't seem to work correctly.
[pid 29030] ioctl(3, VIDIOCSYNC, 0x884d790) = -1 EBUSY (Device or resource busy)
[pid 290
Hi Trent,
On Sun, 1 Mar 2009 06:38:03 -0800 (PST), Trent Piepho wrote:
> On Sun, 22 Feb 2009, Hans Verkuil wrote:
> > Please pull from http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-zoran for the
> > following:
>
> I have some questions about your changes.
> (...)
> > - zoran: remove broken BIGPHYS_
On Sun, 22 Feb 2009, Hans Verkuil wrote:
> Please pull from http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-zoran for the
> following:
I have some questions about your changes.
> - zoran: convert to video_ioctl2 and remove 'ready_to_be_freed' hack.
It looks like this patch deleted the code relating
2009/2/20 :
> # HG changeset patch
> # User ter...@xiterrex.net
> # Date 1235153250 -3600
> # Node ID 078bd274de0d26a92ccff6c7da050edbc299f0b7
> # Parent f83a2a650df2bcf2ce659012f011ee5dcd7b1d74
> New frequency table for Cadiz (Andalusia, Spain)
Thanks, added :)
Christoph
--
To unsubscribe from
Hello,
I recently purchased a pair of DNTV Live! Dual Hybrid PCI-Express S3
cards (see http://www.digitalnow.com.au/product_pages/DNTVDualS3.html)
without properly checking that they were supported under Linux. Silly
me.
I see that Manu Abraham is currently working on a saa716x driver, so I
hav
25 matches
Mail list logo
