On Fri, 25 Dec 2009, TAXI wrote:
I tried a Medion MD 95700 with kernel 2.6.32 (for tests: 2.6.30.9) and
have a very bad image and sound quality.
I have two of these boxes, and they work great -- but I've had to
patch the kernel in different ways to have success.
One way for my production
Hello Morimoto-san
On Fri, 25 Dec 2009, Kuninori Morimoto wrote:
Dear Guennadi
Now my board (EcoVec) can use 2 soc-camera (mt9t112 / tw9910),
and mt9t112 can attach/detach.
If mt9t112 is attached,
/dev/video0 = mt9t112
/dev/video1 = tw9910
But if mt9t112 is detached, it will
BOUWSMA Barry schrieb:
The other thing to note is that this device delivers a full
unfiltered Transport Stream, which with the 13,27Mbit/sec typical
bandwidth per channel used in your country (apart from some local
exceptions of greater values), will require a USB2 interface.
it is a USB2
Hi Mauro,
On Fri, 25 Dec 2009, Mauro Carvalho Chehab wrote:
Em 24-12-2009 00:17, Mauro Carvalho Chehab escreveu:
I wrote several patches those days in order to allow dvb-apps to properly
parse ISDB-T channel.conf.
On ISDB-T, there are several new parameters, so the parsing is more complex
Moin moin, TAXI...
On Fri, 25 Dec 2009, TAXI wrote:
BOUWSMA Barry schrieb:
The other thing to note is that this device delivers a full
unfiltered Transport Stream, which with the 13,27Mbit/sec typical
bandwidth per channel used in your country (apart from some local
exceptions of
BOUWSMA Barry schrieb:
Das Problem ist, der Treiber erwartet BULK Datei, nicht ISOC, aber
das Kistchen liefert ISOC (isochronous) Datei. Deswegen kommt es
zu Probleme.
Or, the thing is, Linux is expecting to be seeing bulk data on
this particular alternate interface (6). If the
On Fri, 2009-12-25 at 10:54 +0900, Kuninori Morimoto wrote:
Dear Guennadi
Now my board (EcoVec) can use 2 soc-camera (mt9t112 / tw9910),
and mt9t112 can attach/detach.
If mt9t112 is attached,
/dev/video0 = mt9t112
/dev/video1 = tw9910
But if mt9t112 is detached, it will
/dev/video0 =
On Fri, 25 Dec 2009, TAXI wrote:
I have my machine operating fully again (yeahright), I can send
you some of these alternative patches to try -- running
successfully on 2.6.14 and 2.6.27-rc4.
That would be nice.
Hintergrund (aber nicht so wightig)...
I have not had the chance to update
Hi Mauro,
I wrote several patches those days in order to allow dvb-apps to properly
parse ISDB-T channel.conf.
I think it would be convenient if channel.conf allows
the kind of format of PROPNAME=VALUE list, for readability and extensibility
of the conf file.
there are already so many
BOUWSMA Barry schrieb:
Now rebuild the kernel or the dvb_usb_cxusb module, reboot or load
the new module, and try it and see if it is better.
Great job, it works!
Thank you so much :)
Should we try the isoc transfer now?
--
To unsubscribe from this list: send the line unsubscribe linux-media in
On Fri, 25 Dec 2009, TAXI wrote:
BOUWSMA Barry schrieb:
Now rebuild the kernel or the dvb_usb_cxusb module, reboot or load
the new module, and try it and see if it is better.
Great job, it works!
Thank you so much :)
Should we try the isoc transfer now?
Yes.
I wish I could find a
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Fri Dec 25 19:00:04 CET 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 13846:4c8394d1090a
gcc version: gcc
Em 25-12-2009 09:25, Patrick Boettcher escreveu:
Hi Mauro,
On Fri, 25 Dec 2009, Mauro Carvalho Chehab wrote:
Em 24-12-2009 00:17, Mauro Carvalho Chehab escreveu:
I wrote several patches those days in order to allow dvb-apps to
properly
parse ISDB-T channel.conf.
On ISDB-T, there are
Em 25-12-2009 13:33, Akihiro TSUKADA escreveu:
Hi Mauro,
I wrote several patches those days in order to allow dvb-apps to properly
parse ISDB-T channel.conf.
I think it would be convenient if channel.conf allows
the kind of format of PROPNAME=VALUE list, for readability and
fdtv_fw_exit() is part of the firedtv driver's .exit.text section.
Signed-off-by: Stefan Richter stef...@s5r6.in-berlin.de
---
drivers/media/dvb/firewire/firedtv-fw.c |2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
Index: linux-2.6.33-rc2/drivers/media/dvb/firewire/firedtv-fw.c
If there is ever going to be a FireDTV or FloppyDTV firmware which does
not provide a minimal ASCII textual descriptor for Model_Id --- or if
the descriptor is provided indirectly in a descriptor directory ---
the ieee1394 variant of the device probe of firedtv would dereference a
NULL pointer.
Dear all,
I would like to transmit/stream a channel from skystar (on a Ubuntu
Linux server) to a TV
through ATI X300 SE (128MB) graphic card (s-video interface).
It is possible to do transmit the channel without a gui (gnome, for
instance) in the
server? What I really want is to redirect
Dear all,
I would like to transmit/stream a channel from skystar (on a Ubuntu
Linux server) to a TV through ATI X300 SE (128MB) graphic card
(s-video interface).
It is possible to do transmit the channel without a gui (gnome, for
instance) in the server? What I really want is to redirect
Yves a écrit :
Douglas Schilling Landgraf a écrit :
Hello Yves,
On 12/20/2009 03:21 AM, Yves wrote:
Hi,
I have a Nova-T 500 Dual DVB-T card that used to work very well
under Mandriva 2008.1 (kernel 2.6.24.7).
I moved to Mandriva 2009.1, then 2010.0 (kernel 2.6.31.6) and it
doesn't work
On Fri, Dec 25, 2009 at 5:29 PM, valenzu...@iol.pt wrote:
Dear all,
I would like to transmit/stream a channel from skystar (on a Ubuntu Linux
server) to a TV through ATI X300 SE (128MB) graphic card (s-video
interface).
It is possible to do transmit the channel without a gui (gnome, for
Ps. I forgot to mention there is no desktop installed on the system.
For that matter there isn't a keyboard, mouse, or monitor either.
System maintenance is done via ssh from another computer and VDR is
controlled using lirc + a remote control.
--
To unsubscribe from this list: send the line
21 matches
Mail list logo
