At Fri, 13 May 2011 20:26:38 +0200,
Ondrej Zary wrote:
Change the weird SND_FM801_TEA575X_BOOL define in Kconfig to SND_FM801_RADIO
and remove TEA575X_RADIO define from fm801.c.
Well, this config is used over years, and if it's about only renaming,
it won't be worth enough.
Removing
At Thu, 12 May 2011 22:17:56 +0200,
Ondrej Zary wrote:
freq_fixup is a constant, no need to hold it in struct snd_tea575x and set in
each driver.
Signed-off-by: Ondrej Zary li...@rainbow-software.org
Thanks, applied all three patches.
Takashi
---
At Sat, 14 May 2011 00:17:23 +0200,
Ondrej Zary wrote:
Hello,
the SF16-FMR2 radio card is basically a TEA5757 tuner connected to ISA bus but
the driver currently uses its own implementation. I converted the driver to
use generic tea575x-tuner implementation (see patch below) and it works
On Saturday, May 14, 2011 00:17:23 Ondrej Zary wrote:
Hello,
the SF16-FMR2 radio card is basically a TEA5757 tuner connected to ISA bus but
the driver currently uses its own implementation. I converted the driver to
use generic tea575x-tuner implementation (see patch below) and it works fine.
Em 18-04-2011 17:15, Jesse Barker escreveu:
One of the big issues we've been faced with at Linaro is around GPU
and multimedia device integration, in particular the memory management
requirements for supporting them on ARM. This next cycle, we'll be
focusing on driving consensus around a
On Friday, May 13, 2011 14:43:08 Laurent Pinchart wrote:
Hi Tomasz and Hans,
First of all, apologies for the late reply.
On Saturday 07 May 2011 13:52:25 Hans Verkuil wrote:
On Thursday, May 05, 2011 11:39:54 Tomasz Stanislawski wrote:
Hello everyone,
This patch-set introduces
On Saturday, May 14, 2011 12:19:18 Mauro Carvalho Chehab wrote:
Em 18-04-2011 17:15, Jesse Barker escreveu:
One of the big issues we've been faced with at Linaro is around GPU
and multimedia device integration, in particular the memory management
requirements for supporting them on ARM.
On Friday, May 13, 2011 09:45:51 Guennadi Liakhovetski wrote:
I've found some more time to get back to this. Let me try to recap, what
has been discussed. I've looked through all replies again (thanks to
all!), so, I'll present a summary. Any mistakes and misinterpretations are
mine;) If I
Hello Mauro and thanks for your sentences
But:
1- For such experienced programmer as you, it is obvious from
http://daftar.minidns.net/pctv/problem.html#problem2 , that when no
any software could scan the channels, thus at least one important
problem is in the kernel side, isn't it?
If the
On Sat, 2011-05-07 at 14:46 +0200, Hans Verkuil wrote:
On Thursday, May 05, 2011 20:49:21 Sakari Ailus wrote:
enum v4l2_flash_strobe_whence {
V4L2_FLASH_STROBE_WHENCE_SOFTWARE,
V4L2_FLASH_STROBE_WHENCE_EXTERNAL,
};
Perhaps use 'type' instead of 'whence'? English isn't my
On Fri, 2011-05-13 at 16:43 +0200, Laurent Pinchart wrote:
Hi Guennadi,
On Friday 13 May 2011 14:01:32 Guennadi Liakhovetski wrote:
Couldn't spot any problems with the patch except:
On Fri, 13 May 2011, Laurent Pinchart wrote:
From: Hans de Goede hdego...@redhat.com
M420 is an
From: Julia Lawall ju...@diku.dk
ictx-touch is intialied in imon_init_intf1, to the result of calling the
function that contains this code. Thus, in this code, input_free_device
should be called on touch itself.
A simplified version of the semantic match that finds this problem is:
Hi Javier,
On Friday 13 May 2011 08:45:28 javier Martin wrote:
On 13 May 2011 07:02, Chris Rodley carlight...@yahoo.co.nz wrote:
On 11/05/11 19:15, javier Martin wrote:
On 11 May 2011 06:54, Chris Rodley carlight...@yahoo.co.nz wrote:
Thanks, sorry I should have spotted that.
Got
Hi all,
I use a Terratec S7 MKII with dvb_usb_az6027. DVB-S channels are working
fine, but when trying to lock on DVB-S2 channels, the signal level drops
to zero.
Google and Windows told me this problem is not limited to me, and trying
out s2-liplianin, in-kernel drivers of 2.6.38 and
Hi Sylwester,
On Wednesday 11 May 2011 17:17:10 Sylwester Nawrocki wrote:
Add the subdev driver for the MIPI CSIS units available in S5P and
Exynos4 SoC series. This driver supports both CSIS0 and CSIS1
MIPI-CSI2 receivers.
The driver requires Runtime PM to be enabled for proper operation.
Hi there
Could somebody add this to the set of scan's initial scanning files?
I'm guessing the name of the file should be something along the lines
of dvb-c/dk-Aarhus-AarhusAntenneforening.
# freq sr fec mod
C 34600 690 AUTO QAM64
Cheers
/Darren
--
To unsubscribe from this list: send
Em 14-05-2011 13:19, a baffian escreveu:
Hello Mauro and thanks for your sentences
But:
1- For such experienced programmer as you, it is obvious from
First of all, if you need some help, please change your tone, as it
seems a little offensive. We all are volunteers, and, while we spend
some
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Sat May 14 19:00:41 CEST 2011
git hash:f9b51477fe540fb4c65a05027fdd6f2ecce4db3b
gcc version: i686-linux-gcc (GCC)
Hi Andy,
On Saturday 14 May 2011 15:31:55 Andy Walls wrote:
On Fri, 2011-05-13 at 16:43 +0200, Laurent Pinchart wrote:
On Friday 13 May 2011 14:01:32 Guennadi Liakhovetski wrote:
Couldn't spot any problems with the patch except:
On Fri, 13 May 2011, Laurent Pinchart wrote:
From:
2011/5/14 Darren Black lists.dr...@gmail.com:
Hi there
Could somebody add this to the set of scan's initial scanning files?
I'm guessing the name of the file should be something along the lines
of dvb-c/dk-Aarhus-AarhusAntenneforening.
# freq sr fec mod
C 34600 690 AUTO QAM64
Can you please attach the files as files?
Christoph
2011/5/13 Jodi the Tigger jodi.the.tig...@gmail.com:
Hello all,
I want to add dvb-t scan files for New Zealand, as there only seems to
be one (For Waiatarua, Auckland, NZ).
However I have no idea how to actually get the files I created
On Thursday 12 May 2011, Josh Wu wrote:
This patch is to enable Atmel Image Sensor Interface (ISI) driver support.
- Using soc-camera framework with videobuf2 dma-contig allocator
- Supporting video streaming of YUV packed format
- Tested on AT91SAM9M10G45-EK with OV2640
Signed-off-by: Josh
Remove TEA575X_RADIO define from fm801.c.
Also update Kconfig help text to include all supported cards.
Signed-off-by: Ondrej Zary li...@rainbow-software.org
--- linux-2.6.39-rc2-/sound/pci/Kconfig 2011-05-14 22:22:11.0 +0200
+++ linux-2.6.39-rc2/sound/pci/Kconfig 2011-05-14
Update:
There is a new / updated driver for the H7 over at TerraTec's site:
http://linux.terratec.de/files/TERRATEC_H7/20110323_TERRATEC_H7_Linux.tar.gz
and this time, it includes instructions. Using these instructions and
Xubuntu 10.10 with this kernel:
tingo@vm:~$ uname -a
Linux vm
On Fri, May 13, 2011 at 8:02 PM, Jesse Barnes jbar...@virtuousgeek.org wrote:
On Fri, 13 May 2011 18:16:30 +0200
Daniel Vetter daniel.vet...@ffwll.ch wrote:
Hi Jesse,
Discussion here in Budapest with v4l and embedded graphics folks was
extremely fruitful. A few quick things to take away -
Hello and thanks
On Sat, May 14, 2011 at 10:16 PM, Mauro Carvalho Chehab
mauroche...@gmail.com wrote:
Em 14-05-2011 13:19, a baffian escreveu:
Hello Mauro and thanks for your sentences
But:
1- For such experienced programmer as you, it is obvious from
First of all, if you need some help,
Em 14-05-2011 01:07, Anssi Hannula escreveu:
On 14.05.2011 01:39, Mauro Carvalho Chehab wrote:
Em 13-05-2011 01:48, Anssi Hannula escreveu:
On 12.05.2011 04:36, Mauro Carvalho Chehab wrote:
Em 12-05-2011 03:10, Mauro Carvalho Chehab escreveu:
Em 12-05-2011 02:37, Anssi Hannula escreveu:
I
27 matches
Mail list logo