Hi,
On Fri, Jan 12, 2018 at 10:18:39AM +0800, Yong wrote:
> > On Thu, Jan 11, 2018 at 09:15:08AM +0800, Yong wrote:
> > > > On Mon, Jan 08, 2018 at 05:13:39PM +, Hugues FRUCHET wrote:
> > > > > I'm using a ST board with OV5640 wired in parallel bus output in
> > > > > order
> > > > > to inte
Hi Maxime,
On Thu, 11 Jan 2018 13:40:18 +0100
Maxime Ripard wrote:
> Hi Yong,
>
> On Thu, Jan 11, 2018 at 09:15:08AM +0800, Yong wrote:
> > > On Mon, Jan 08, 2018 at 05:13:39PM +, Hugues FRUCHET wrote:
> > > > I'm using a ST board with OV5640 wired in parallel bus output in order
> > > > t
Hi Yong,
On Thu, Jan 11, 2018 at 09:15:08AM +0800, Yong wrote:
> > On Mon, Jan 08, 2018 at 05:13:39PM +, Hugues FRUCHET wrote:
> > > I'm using a ST board with OV5640 wired in parallel bus output in order
> > > to interface to my STM32 DCMI parallel interface.
> > > Perhaps could you describe
Hi Hugues,
On Wed, Jan 10, 2018 at 03:51:07PM +, Hugues FRUCHET wrote:
> Good news Maxime !
>
> Have you seen that you can adapt the polarities through devicetree ?
>
> + /* Parallel bus endpoint */
> + ov5640_to_parallel: endpoint {
> [...]
> +
On Thu, Jan 11, 2018 at 08:25:41AM +, Hugues FRUCHET wrote:
> On 01/11/2018 09:19 AM, Sakari Ailus wrote:
> > On Thu, Jan 11, 2018 at 08:12:11AM +, Hugues FRUCHET wrote:
> >> Hi Sakari,
> >>
> >> On 01/10/2018 11:25 PM, Sakari Ailus wrote:
> >>> Hi Hugues,
> >>>
> >>> On Wed, Jan 10, 2018 a
On 01/11/2018 09:19 AM, Sakari Ailus wrote:
> On Thu, Jan 11, 2018 at 08:12:11AM +, Hugues FRUCHET wrote:
>> Hi Sakari,
>>
>> On 01/10/2018 11:25 PM, Sakari Ailus wrote:
>>> Hi Hugues,
>>>
>>> On Wed, Jan 10, 2018 at 03:51:07PM +, Hugues FRUCHET wrote:
Good news Maxime !
Have
On Thu, Jan 11, 2018 at 08:12:11AM +, Hugues FRUCHET wrote:
> Hi Sakari,
>
> On 01/10/2018 11:25 PM, Sakari Ailus wrote:
> > Hi Hugues,
> >
> > On Wed, Jan 10, 2018 at 03:51:07PM +, Hugues FRUCHET wrote:
> >> Good news Maxime !
> >>
> >> Have you seen that you can adapt the polarities thr
Hi Sakari,
On 01/10/2018 11:25 PM, Sakari Ailus wrote:
> Hi Hugues,
>
> On Wed, Jan 10, 2018 at 03:51:07PM +, Hugues FRUCHET wrote:
>> Good news Maxime !
>>
>> Have you seen that you can adapt the polarities through devicetree ?
>>
>> + /* Parallel bus endpoint */
>> +
Hi Maxime,
On Wed, 10 Jan 2018 16:37:24 +0100
Maxime Ripard wrote:
> Hi Hugues,
>
> On Mon, Jan 08, 2018 at 05:13:39PM +, Hugues FRUCHET wrote:
> > I'm using a ST board with OV5640 wired in parallel bus output in order
> > to interface to my STM32 DCMI parallel interface.
> > Perhaps could
Hi Hugues,
On Wed, Jan 10, 2018 at 03:51:07PM +, Hugues FRUCHET wrote:
> Good news Maxime !
>
> Have you seen that you can adapt the polarities through devicetree ?
>
> + /* Parallel bus endpoint */
> + ov5640_to_parallel: endpoint {
> [...]
> +
Good news Maxime !
Have you seen that you can adapt the polarities through devicetree ?
+ /* Parallel bus endpoint */
+ ov5640_to_parallel: endpoint {
[...]
+ hsync-active = <0>;
+ vsync-active
Hi Hugues,
On Mon, Jan 08, 2018 at 05:13:39PM +, Hugues FRUCHET wrote:
> I'm using a ST board with OV5640 wired in parallel bus output in order
> to interface to my STM32 DCMI parallel interface.
> Perhaps could you describe your setup so I could help on understanding
> the problem on your s
Hi Hugues,
On Mon, Jan 08, 2018 at 05:13:39PM +, Hugues FRUCHET wrote:
> I'm using a ST board with OV5640 wired in parallel bus output in order
> to interface to my STM32 DCMI parallel interface.
> Perhaps could you describe your setup so I could help on understanding
> the problem on your s
Hello Hugues,
thank you for getting back to me, I'll look into your suggestions in the next
few days, I'll give you a feedback as soon as I know more.
Thanks,
Fab
> Subject: Re: [PATCH v5 0/5] Add OV5640 parallel interface and RGB565/YUYV
> support
>
> Hi Fabrizio,
>
s of this
> patch series on a non-STM32 platform?
>
> Thanks,
> Fabrizio
>
>
>> Subject: [PATCH v5 0/5] Add OV5640 parallel interface and RGB565/YUYV support
>>
>> Enhance OV5640 CSI driver to support also DVP parallel interface.
>> Add RGB565 (LE & BE) and Y
get DVP to work by means of this patch
series on a non-STM32 platform?
Thanks,
Fabrizio
> Subject: [PATCH v5 0/5] Add OV5640 parallel interface and RGB565/YUYV support
>
> Enhance OV5640 CSI driver to support also DVP parallel interface.
> Add RGB565 (LE & BE) and YUV422 YUYV form
Hi Maxime,
I'm using a ST board with OV5640 wired in parallel bus output in order
to interface to my STM32 DCMI parallel interface.
Perhaps could you describe your setup so I could help on understanding
the problem on your side. From my past experience with this sensor
module, you can first che
Hi Hugues,
On Wed, Jan 03, 2018 at 10:57:27AM +0100, Hugues Fruchet wrote:
> Enhance OV5640 CSI driver to support also DVP parallel interface.
> Add RGB565 (LE & BE) and YUV422 YUYV format in addition to existing
> YUV422 UYVY format.
> Some other improvements on chip identifier check and removal
Enhance OV5640 CSI driver to support also DVP parallel interface.
Add RGB565 (LE & BE) and YUV422 YUYV format in addition to existing
YUV422 UYVY format.
Some other improvements on chip identifier check and removal
of warnings in powering phase around gpio handling.
===
= history =
===
19 matches
Mail list logo