Hello,
Please find below some news for A918R
[details @
http://www.linuxtv.org/wiki/index.php/AVerMedia_AVerTV_HD_Express_A918R ]
* the patch proposed to automatically load the right modules for A918R
card is not yet available
=
On 04/09/2013 05:46 PM, Diorser wrote:
Hello,
Please find below some news for A918R
[details @
http://www.linuxtv.org/wiki/index.php/AVerMedia_AVerTV_HD_Express_A918R ]
* the patch proposed to automatically load the right modules for A918R
card is not yet available
=
With RF signal input now clearly reported at , antenna switch problem
is a good assumption.
However, I don't have the right skills to sniff and imagine which file
should be modified and how.
All I can do is recompiling git files and test.
If a list a GPIO values was available somewhere,
I don't know why you resists to remove antenna or unplug stick, but
even you remove antenna I am quite sure you will see similar results.
I've been simply confused by the signal reported at level most of the
time, and the scanning working.
I thought the problem was a step behind with
On 01/03/2013 11:24 PM, Diorser wrote:
I don't know why you resists to remove antenna or unplug stick, but
even you remove antenna I am quite sure you will see similar results.
I've been simply confused by the signal reported at level most of
the time, and the scanning working.
hmm,
Hi all,
After struggling some days trying to wake up a AVerTV_HD_Express_A918R
DVB-T card, I am stuck with a DMX_SET_PES_FILTER error reported by
dvbsnoop, I cannot solve (beyond my skills).
This card is based on Afatech AF9035 + AF9033 + NXP TDA18218HN, and then
very similar to
On 01/01/2013 11:40 PM, Diorser wrote:
Hi all,
After struggling some days trying to wake up a AVerTV_HD_Express_A918R
DVB-T card, I am stuck with a DMX_SET_PES_FILTER error reported by
dvbsnoop, I cannot solve (beyond my skills).
This card is based on Afatech AF9035 + AF9033 + NXP TDA18218HN,
Thanks for your so fast reply.
Unfortunately, scanning output is always empty with 100% signal strength
(external antenna)
I also use a AverTV super_007 with the same external antenna on a another
PC with Kaffeine =Signal = 100%.
I also tried different dvb-usb-af9035-02.fw firmware with
On 01/02/2013 01:09 AM, Diorser wrote:
Thanks for your so fast reply.
Unfortunately, scanning output is always empty with 100% signal
strength (external antenna)
I also use a AverTV super_007 with the same external antenna on a
another PC with Kaffeine =Signal = 100%.
Does it show 100% even
Does it show 100% even antenna is unplugged ?
It seems in fact that signal indicator is not reliable.
I have to sometimes reset dvb with:
for I in dvb_usb_af9035 af9033 tda18218 dvb_usb_v2 dvb_core rc_core; do
rmmod $I; done
modprobe dvb-usb-af9035
The antenna signal input is fine, this
On 01/02/2013 02:12 AM, Diorser wrote:
Does it show 100% even antenna is unplugged ?
It seems in fact that signal indicator is not reliable.
I have to sometimes reset dvb with:
for I in dvb_usb_af9035 af9033 tda18218 dvb_usb_v2 dvb_core rc_core; do
rmmod $I; done
modprobe dvb-usb-af9035
The
Just to compare, this is the same tzap test made on same channel with a
AverTV 007 (saa7134) on a another PC, with same antenna.
It works perfectly.
tzap -r TEST
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
reading channels from file '~/.tzap/channels.conf'
tuning to
12 matches
Mail list logo