--- On Wed, 2/18/09, Hans Verkuil hverk...@xs4all.nl wrote:
From: Hans Verkuil hverk...@xs4all.nl
Subject: Re: Minimum kernel version supported by v4l-dvb
To: Mauro Carvalho Chehab mche...@infradead.org
Cc: Jean Delvare kh...@linux-fr.org, linux-media@vger.kernel.org
Date: Wednesday,
It then dawned on my why the 115-only results were so bad. I had left
the 4-way splitter output used for the x50s unterminated. Sure
enough, if I disconnected the x50s, I reproduced the severe errors. I
didn't tear everything back apart to verify it, but I believe the 115s
would work
--- On Wed, 2/18/09, Hans Verkuil hverk...@xs4all.nl wrote:
From: Hans Verkuil hverk...@xs4all.nl
Subject: Re: Minimum kernel version supported by v4l-dvb
To: Mauro Carvalho Chehab mche...@infradead.org
Cc: Jean Delvare kh...@linux-fr.org, linux-media@vger.kernel.org
Date: Wednesday,
Thats the Problem, you only can get the driver for your card from another
repo, but not the main one.
After the first rusch pusching s2api out, no one is intrested anymore to
get more s2 cards working in the mainline development tree.
On Wed, 18 Feb 2009 10:22:17 +0100
Andreas Kurz
Patch resent to the proper ML, in order to be handled by patchwork.
Michael,
The patch seems ok to my eyes. Please ack if ok for you to apply it.
Forwarded message:
Date: Wed, 18 Feb 2009 10:11:10 +0100
From: Roel Kluin roel.kl...@gmail.com
To: Michael Krufky mkru...@linuxtv.org
Cc: Mauro
Hi Mauro,
On Wed, 18 Feb 2009 09:55:53 +0100 (CET)
Hans Verkuil hverk...@xs4all.nl wrote:
Not at all. I work with embedded systems and what happens is that you
effectively take a kernel snapshot for your device and stick to that.
You're not using v4l-dvb, but you might backport important
Hi,
On Mi, Feb 18, 2009 at 10:38:30 +0100, gimli wrote:
Thats the Problem, you only can get the driver for your card from another
repo, but not the main one.
After the first rusch pusching s2api out, no one is intrested anymore to
get more s2 cards working in the mainline development tree.
On Wed, 18 Feb 2009 11:54:30 +0100 (CET)
Hans Verkuil hverk...@xs4all.nl wrote:
Hi Mauro,
On Wed, 18 Feb 2009 09:55:53 +0100 (CET)
Hans Verkuil hverk...@xs4all.nl wrote:
Not at all. I work with embedded systems and what happens is that you
effectively take a kernel snapshot for your
On Wed, 2009-02-18 at 03:09 -0800, Trent Piepho wrote:
Here's an attempt to fix the pluto2 driver to not do this. I don't have
the hardware or information about the hardware so I'm not sure if it's
right. It's not that major of an undertaking. It would have been easier
if the driver was
Am Dienstag, 17. Februar 2009 21:19:45 schrieben Sie:
[...]
So what does all of this indicate? My original hunch was that it's a
problem with the x50 hardware or driver (at least in combination with
my motherboard). I think I'm back to that conclusion.
BTW, in my testing last night, I tried
Le 18.02.2009 05:33:53, Jean-Francois Moine a écrit :
On Wed, 18 Feb 2009 10:22:17 +0100
Andreas Kurz kurz.a...@gmx.at wrote:
Few days ago I was asking for help: I have bought the TT 3650 CI
but
even after installing the drivers (as suggested in the WIKI-How-To)
no card shows up in
Jean-Francois Moine wrote:
On Tue, 17 Feb 2009 20:35:28 +0100
Thomas Kaiser v...@kaiser-linux.li wrote:
Jean-Francois Moine wrote:
BTW, I am coding the subdriver of a new webcam, and I could not find
how to decompress the images. It tried many decompression functions,
those from the v4l
Hi Mauro,
On Wed, 18 Feb 2009 07:10:41 -0300, Mauro Carvalho Chehab wrote:
On Wed, 18 Feb 2009 09:55:53 +0100 (CET)
Hans Verkuil hverk...@xs4all.nl wrote:
Not at all. I work with embedded systems and what happens is that you
effectively take a kernel snapshot for your device and stick to
DongSoo(Nathaniel) Kim wrote:
Hello Adam,
I've been thinking exactly the same issue not usb but SoC based camera.
I have no idea about how usb cameras work but I am quite curious about
is it really possible to make proper orientation with only querying
camera driver.
Because in case of SoC
Hi Gilles,
On Thursday 12 February 2009 23:44:55 gilles wrote:
Hi everyone,
Sorry for double posting, but I originally sent this to the old mailing
list. Here it is:
I have a couple of comments / suggestions regarding the part on controls of
the V4L2 api:
Some controls, such as pan
I then removed the 250 from slot 4 leaving the 115s in slots 1 and 2.
The ber was through the roof and the recorded strams were filled with
errors and were barely playable at best.
This is bad, you have something wrong with your feeds. They're probably
over amp'd and your leaking RF like
Trent Piepho wrote:
On Tue, 17 Feb 2009, Steven Toth wrote:
Trent Piepho wrote:
On Mon, 16 Feb 2009, Steven Toth wrote:
Hartmut, Oliver and Trent: Thanks for helping with this issue. I've just
reverted the changeset. We still need a fix at dm1105, au0828-dvb and maybe
other drivers that call
Guennadi,
Guennadi Liakhovetski wrote:
From: Guennadi Liakhovetski
General code clean-up: remove superfluous semicolons, update comments.
Robustness improvements: add DMA error handling to the ISR, move common code
fragments to functions, fix scatter-gather element queuing in the ISR,
Devin Heitmueller wrote:
On Tue, Feb 17, 2009 at 5:29 PM, Steven Toth st...@linuxtv.org wrote:
The driver is probably buggy. Either its really reporting pre-viterbi errors
OR it's reporting real post-viterbi errors - but in which case why aren't we
also measuring uncorrected blocks?
Regardless
On Wed, 18 Feb 2009, Agustin wrote:
I am having some stoopid trouble while trying to apply this patch to
'mxc-master':
$ patch -p1 --dry-run p1
patching file drivers/dma/ipu/ipu_idmac.c
patch: malformed patch at line 29: /*
Looks like your patches lost their format while on their
On Wed, Feb 18, 2009 at 08:45:57AM +0100, Hans Verkuil wrote:
On Tuesday 17 February 2009 16:53:29 David Engel wrote:
On Fri, Feb 13, 2009 at 02:28:11PM -0600, David Engel wrote:
On Fri, Feb 13, 2009 at 09:28:45AM -0200, Mauro Carvalho Chehab wrote:
Ok, I found the bug. It is inside
On Wed, Feb 18, 2009 at 09:25:07AM +0100, Rudy Zijlstra wrote:
It then dawned on my why the 115-only results were so bad. I had left
the 4-way splitter output used for the x50s unterminated. Sure
enough, if I disconnected the x50s, I reproduced the severe errors. I
didn't tear
On Wed, Feb 18, 2009 at 09:56:13AM -0500, Steven Toth wrote:
I then removed the 250 from slot 4 leaving the 115s in slots 1 and 2.
The ber was through the roof and the recorded strams were filled with
errors and were barely playable at best.
This is bad, you have something wrong with
On Wed, Feb 18, 2009 at 04:41:40AM -0800, Andreas wrote:
Am Dienstag, 17. Februar 2009 21:19:45 schrieben Sie:
[...]
So what does all of this indicate? My original hunch was that it's a
problem with the x50 hardware or driver (at least in combination with
my motherboard). I think I'm
Trent Piepho wrote:
On Wed, 18 Feb 2009, Oliver Endriss wrote:
[1] If you want to lock a process against an interrupt handler,
- the process must use spin_lock_irq()
- the interrupt can use spin_lock()
A routine has to use spin_lock_irqsave if (and only if) process and irq
call the
Uniform capitals, add trailing slash to some URLs and other typo corrections.
Priority: low
Signed-off-by: Nicola Soranzo nsora...@tiscali.it
---
v2: - drop Kernel lowercasing when not in combination with Linux per
review comment from Mauro Carvalho Chehab
- s/Alsa/ALSA
diff -r
On Thu, Feb 12, 2009 at 10:06 PM, vas...@gmail.com wrote:
On Thu, Feb 12, 2009 at 8:42 PM, Jean-Francois Moine moin...@free.fr wrote:
On Wed, 11 Feb 2009 20:42:07 +0200
vas...@gmail.com wrote:
hello, I am writing v4l2 loopback driver and now it is at working
stage. for now it can feed
(moved to the new v4l list)
Hi Alexey,
On Wed, 24 Dec 2008, Alexey Klimov wrote:
Hello, Guennadi
See, I didn't ignore your email and didn't forget about it:-)
+static struct platform_device mx3_camera = {
+ .name = mx3-camera,
You include mach/mx3_camera.h in this
Hi Morimoto-san
On Mon, 16 Feb 2009, morimoto.kunin...@renesas.com wrote:
Hi Magnus
Morimoto-san, can you check the attached patch? I've tested it on my
Migo-R board together with mplayer and it seems to work well here. I
don't think using mplayer triggers this error case though, so
On Fri, 13 Feb 2009, Magnus Damm wrote:
Hi Matthieu,
[CC Morimoto-san]
[Changed list to linux-media]
On Tue, Jan 20, 2009 at 6:27 PM, Matthieu CASTET
matthieu.cas...@parrot.com wrote:
Magnus Damm a écrit :
On Mon, Jan 19, 2009 at 11:02 PM, Matthieu CASTET
But we didn't do
I'll hold off on both these SOCAM_FIELD_ID_* patches until we have
clarified this, ok?
Thanks
Guennadi
On Thu, 5 Feb 2009, Guennadi Liakhovetski wrote:
On Tue, 3 Feb 2009, Kuninori Morimoto wrote:
sh_mobile_ceu can support field signal from external module.
To support this operation,
Hello List,
i switched to MSI Media Center Platform which can only hold one PCI Card about
a year ago. The built in card is a PCI TT3200 and i added an USB DVB-S2
TT3600 externaly.
I used multiproto and multiproto_plus but got no stable data stream for TT3600
USB adapter.
Always distortions
On Wed, Feb 18, 2009 at 07:09:55AM -0800, Agustin wrote:
Guennadi,
Guennadi Liakhovetski wrote:
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index 1f154d0..91e6e4e 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -28,6 +28,9 @@
On Wed, 18 Feb 2009, Steven Toth wrote:
Trent Piepho wrote:
On Tue, 17 Feb 2009, Steven Toth wrote:
Trent Piepho wrote:
On Mon, 16 Feb 2009, Steven Toth wrote:
Fixing the demux... Would this require and extra buffer copy? probably,
but it's
a trade-off between the amount of spent
Hello Hans.
I went too far.
Just forgot what we can do through porting job.
You are right. That should be board specific item.
Cheers,
Nate
2009. 02. 18, 오후 11:36, Hans de Goede 작성:
DongSoo(Nathaniel) Kim wrote:
Hello Adam,
I've been thinking exactly the same issue not usb but SoC based
(moved to the new v4l list)
On Wed, 18 Feb 2009, Sedji Gaouaou wrote:
Hi everybody,
I am writing here to know if it is the proper place to send a driver that I
have written for atmel's boards.
I would like to know as well if there is a git tree against which I should
based my patch or
--- On 18/2/09, Russell King -wrote:
On Wed, Feb 18, 2009 at 07:09:55AM -0800, Agustin wrote:
$ patch -p1 --dry-run p1
patching file drivers/dma/ipu/ipu_idmac.c
patch: malformed patch at line 29: /*
Looks like your patches lost their format while on their way,
specially every
After reloading the module, the remote control (almost) worked. Unfortunately,
keys got stuck somehow, just as if I were holding a key on the keyboard.
Another key press changed the event being repeated, but there seemed to be *no*
key release events at all.
Pressing the channel up/down keys
Yes, Please merge this Mauro.
Thank you :-)
Acked-by: Michael Krufky mkru...@linuxtv.org
Strange, I didn't get the original mail, but I got Mauro's replies...
Oh well.
Cheers,
Mike
Mauro Carvalho Chehab wrote:
Patch resent to the proper ML, in order to be handled by patchwork.
Le 18.02.2009 15:44:55, Jean-Francois Moine a écrit :
On Wed, 18 Feb 2009 08:48:37 -0400
Manu eall...@gmail.com wrote:
I have such a USB device. It works fine without any patch with
the
last
version of Igor M. Liplianin's repository:
On Tue, 17 Feb 2009, Kyle Guinn wrote:
On Tuesday 17 February 2009 13:09:28 Jean-Francois Moine wrote:
Hi Kyle,
Looking at the v4l library from Hans de Goede, I did not find the
decoding of the MR97310A images. May you send him a patch for that?
Yes, I sent this to him some time ago.
Sedji Gaouaou wrote:
Hi everybody,
I am writing here to know if it is the proper place to send a driver
that I have written for atmel's boards.
I would like to know as well if there is a git tree against which I
should based my patch or should I based it against the latest rc?
Hello, here's
Jiri Kosina wrote:
On Mon, 16 Feb 2009, CityK wrote:
[inline patch]
This doesn't seem to be picked by anyone for current -next/-mmotm, I have
applied it to trivial tree. Thanks,
Will this create any complication? As it is indeed queued in our
patchwork:
Dear Guennadi
It works well on all cases.
So I can add your Tested-by:?
Yes please.
You can try to trigger the race with the capture.c example. Reduce the
count variable in mainloop() and run capture.c in a loop for a while...
Try without this patch and then with this patch. But I
Dear Guennadi
I'll hold off on both these SOCAM_FIELD_ID_* patches until we have
clarified this, ok?
I'm so sorry for very slowly response.
like with other control signals, where if both partners are freely
configurable, then any polarity can be used; if one is configurable and
another
Steven Toth wrote:
Agreed, probably a secondary issue - which probably needs some
attention regardless.
I don't follow kworld products so I don't pretend to know which demod
they're using. I guess my question to the wider audience is, do people
with this same demod on other cards experience
Hi Amy,
Amy Overmyer wrote:
I’m trying to write a driver for the
device, just as a learning exercise. So far, I’ve got the firmware in intel
hex
format (from usbsnoop on windows, then a couple perl scripts to mutate it)
and
am able to use fxload to load it with –t fx2 and there are 2
Evidently someone from NXP has left a message in the wiki (Ignore the
incorrect date, as the message was entered today; see history for
confirmation): http://www.linuxtv.org/wiki/index.php/Talk:NXP_SAA716x
I will invite them to join into this thread.
If octavsly is able to assist, I believe the
Andreas wrote:
Just to let you know that you're not alone:
I had a simiilar problem with the combination of an AverMedia A180 and
two Asus Falcon (they use the ivtv drivers and firmware). Whenever one
of the Falcons was recording, I got blips and dropouts on the
AverMedia. I chalked it off
panagiotis takis_rs wrote:
Hey!!
I have a problem with my tv card(pinnacle pctv 310i)
I can see image but i have no sound.
I have tried both tvtime and kdetv.
I have found this http://ubuntuforums.org/showthread.php?t=568528 . Is it
related with my problem?
My tv card give audio
On Thu, 19 Feb 2009, morimoto.kunin...@renesas.com wrote:
Dear Guennadi
It works well on all cases.
So I can add your Tested-by:?
Yes please.
You can try to trigger the race with the capture.c example. Reduce the
count variable in mainloop() and run capture.c in a loop for a
51 matches
Mail list logo
