Hi!
> I don't have pre-production N900s. The phone I use for development
> is HW revision 2101 with Finish keyboard layout. Apart from that
> I have my productive phone, which is rev 2204 with German layout.
How do you check hw revision?
Thanks,
Hi Javier,
Thank you for the patch.
On Tuesday 12 Apr 2016 18:42:52 Javier Martinez Canillas wrote:
> The tvp5150 and tvp5151 decoders support different video input source
> connections to their AIP1A and AIP1B pins. Either two Composite or a
> S-Video input signals are supported.
>
> The
Hi Sergei,
On Tuesday 26 Apr 2016 21:09:10 Sergei Shtylyov wrote:
> On 04/26/2016 12:36 AM, Laurent Pinchart wrote:
> > Turn the helper into a function that can retrieve crop and compose
> > selection rectangles.
> >
> > Signed-off-by: Laurent Pinchart
> >
Looks mostly good, a few comments.
On 04/27/2016 05:08 AM, Shuah Khan wrote:
[...]
> @@ -428,7 +428,7 @@ static long media_device_ioctl(struct file *filp,
> unsigned int cmd,
> unsigned long arg)
> {
> struct media_devnode *devnode = media_devnode_data(filp);
Hi,
On Wed, Apr 27, 2016 at 06:45:29PM +0200, Pavel Machek wrote:
> > I don't have pre-production N900s. The phone I use for development
> > is HW revision 2101 with Finish keyboard layout. Apart from that
> > I have my productive phone, which is rev 2204 with German layout.
>
> How do you check
Hi,
On Wed, Apr 6, 2016 at 5:20 PM, Helen Mae Koike Fornazier
wrote:
> From: Helen Fornazier
>
> First version of the Virtual Media Controller.
> Add a simple version of the core of the driver, the capture and
> sensor nodes in the
Hi,
On Wed, Apr 27, 2016 at 09:57:51AM +0300, Ivaylo Dimitrov wrote:
> >>https://git.kernel.org/cgit/linux/kernel/git/sre/linux-n900.git/log/?h=n900-camera-ivo
> >
> >Ok, going to diff with my tree to see what I have missed to send in the
> >patchset
>
> Now, that's getting weird.
[...]
> I
Hi,
On Wed Apr 27 19:42:56 2016 Sebastian Reichel wrote:
> Hi,
>
> On Wed, Apr 27, 2016 at 09:57:51AM +0300, Ivaylo Dimitrov wrote:
> > > > https://git.kernel.org/cgit/linux/kernel/git/sre/linux-n900.git/log/?h=n900-camera-ivo
> > >
> > > Ok, going to diff with my tree to see
Hi Mauro,
Please pull the following patches correcting the returned error codes
and respective docs in the pipeline validation.
Regards,
Helen
The following changes since commit 45c175c4ae9695d6d2f30a45ab7f3866cfac184b:
[media] tw686x: avoid going past array (2016-04-26 06:38:53 -0300)
Hello Laurent,
Thanks a lot for your feedback.
On 04/27/2016 10:29 AM, Laurent Pinchart wrote:
> Hi Javier,
>
> Thank you for the patch.
>
> On Tuesday 12 Apr 2016 18:42:52 Javier Martinez Canillas wrote:
>> The tvp5150 and tvp5151 decoders support different video input source
>> connections
Hi together,
I tried to recompile with the newest media_tree, so I just copied your
modifications to the new media_tree. (I also refetched the media_build.)
It wasn't very helpful, but I've seen that there is a kernel
error message (which was there before too, but I hadn't seen it because
I
Hi!
> > On Wed, Apr 27, 2016 at 09:57:51AM +0300, Ivaylo Dimitrov wrote:
> > > > > https://git.kernel.org/cgit/linux/kernel/git/sre/linux-n900.git/log/?h=n900-camera-ivo
> > > >
> > > > Ok, going to diff with my tree to see what I have missed to send in
> > > > the patchset
> > >
> > > Now,
Hi!
> On Wed, Apr 27, 2016 at 09:57:51AM +0300, Ivaylo Dimitrov wrote:
> > >>https://git.kernel.org/cgit/linux/kernel/git/sre/linux-n900.git/log/?h=n900-camera-ivo
> > >
> > >Ok, going to diff with my tree to see what I have missed to send in the
> > >patchset
> >
> > Now, that's getting weird.
On Mon, Apr 25, 2016 at 09:16:51PM -0600, Wade Berrier wrote:
> On Apr 25 18:15, Sean Young wrote:
> > On Sun, Apr 24, 2016 at 10:06:33PM -0600, Wade Berrier wrote:
> > > Hello,
> > >
> > > I have a mceusb compatible transceiver that only seems to work with
> > > certain computers. I'm testing
Hi!
> >>Try with:
> >>
> >>media-ctl -r
> >>media-ctl -l '"et8ek8 3-003e":0 -> "video-bus-switch":1 [1]'
> >>media-ctl -l '"video-bus-switch":0 -> "OMAP3 ISP CCP2":0 [1]'
> >>media-ctl -l '"OMAP3 ISP CCP2":1 -> "OMAP3 ISP CCDC":0 [1]'
> >>media-ctl -l '"OMAP3 ISP CCDC":2 -> "OMAP3 ISP preview":0
Used memory mapped eeprom offsets were off-by 8 bytes.
Signed-off-by: Antti Palosaari
---
drivers/media/usb/dvb-usb-v2/af9035.h | 24
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.h
Hi!
> It's part of the v4l-utils git repo:
>
> https://git.linuxtv.org/v4l-utils.git/
...
> > > Anyway, does anyone know where to get the media-ctl tool?
> >
> > Looks like it is part of v4l-utils package. At least in git:
> > https://git.linuxtv.org/v4l-utils.git/tree/utils/media-ctl
> >
> >
Instead of using two tables to estimate the temporal decimation
factor, use a formula. This allows to get the closest fps, with
sounds better than the current tables.
Compile-tested only.
Signed-off-by: Mauro Carvalho Chehab
[media] tw686x: cleanup the fps estimation
On 03/24/2016 05:37 AM, Mauro Carvalho Chehab wrote:
> Em Thu, 24 Mar 2016 10:24:44 +0200
> Laurent Pinchart escreveu:
>
>> On Wednesday 23 Mar 2016 16:27:46 Mauro Carvalho Chehab wrote:
>>> struct media_devnode is currently embedded at struct media_device.
>>>
On 04/27/2016 10:43 AM, Lars-Peter Clausen wrote:
> Looks mostly good, a few comments.
>
> On 04/27/2016 05:08 AM, Shuah Khan wrote:
> [...]
>> @@ -428,7 +428,7 @@ static long media_device_ioctl(struct file *filp,
>> unsigned int cmd,
>> unsigned long arg)
>> {
>>
Em Wed, 27 Apr 2016 09:00:49 -0300
Mauro Carvalho Chehab escreveu:
> Hmm
>
> Em Wed, 27 Apr 2016 08:01:19 -0300
> Mauro Carvalho Chehab escreveu:
>
> > Instead of using two tables to estimate the temporal decimation
> > factor, use a
On Tue, Apr 26, 2016 at 12:36:26AM +0300, Laurent Pinchart wrote:
> The FCP is a companion module of video processing modules in the Renesas
> R-Car Gen3 SoCs. It provides data compression and decompression, data
> caching, and conversion of AXI transactions in order to reduce the
> memory
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date: Thu Apr 28 04:00:21 CEST 2016
git branch: test
git hash: 45c175c4ae9695d6d2f30a45ab7f3866cfac184b
gcc
From: Zhaoxiu Zeng
This patch removes the local MT2063_gcd function, uses lib gcd instead
Signed-off-by: Zhaoxiu Zeng
---
drivers/media/tuners/mt2063.c | 30 +-
1 file changed, 5 insertions(+), 25 deletions(-)
diff
Hi,
On 27.04.2016 08:05, Ivaylo Dimitrov wrote:
Hi,
On 27.04.2016 06:08, Sebastian Reichel wrote:
Hi,
On Mon, Apr 25, 2016 at 12:08:00AM +0300, Ivaylo Dimitrov wrote:
Those patch series make cameras on Nokia N900 partially working.
Some more patches are needed, but I've already sent them
Hi Dan,
Em Wed, 27 Apr 2016 11:09:28 +0300
Dan Carpenter escreveu:
> The > ARRAY_SIZE() should be >= ARRAY_SIZE().
I actually did this fix when I produced the patch, just I forgot to fold
it when merging. Anyway, this was fixed upstream by this patch:
Em Wed, 27 Apr 2016 07:31:59 -0300
Mauro Carvalho Chehab escreveu:
> Hi Dan,
>
> Em Wed, 27 Apr 2016 11:09:28 +0300
> Dan Carpenter escreveu:
>
> > The > ARRAY_SIZE() should be >= ARRAY_SIZE().
>
> I actually did this fix when I produced
Instead of using two tables to estimate the temporal decimation
factor, use a formula. This allows to get the closest fps, with
sounds better than the current tables.
Compile-tested only.
Signed-off-by: Mauro Carvalho Chehab
---
drivers/media/pci/tw686x/tw686x-video.c
All multimedia devices found on Exynos SoCs support only contiguous
buffers, so set DMA max segment size to DMA_BIT_MASK(32) to let memory
allocator to correctly create contiguous memory mappings.
Signed-off-by: Marek Szyprowski
---
This patch was posted earlier as a
On Wed, Apr 27, 2016 at 07:31:59AM -0300, Mauro Carvalho Chehab wrote:
> I don't like magic numbers, but, in this very specific case, setting
> frames per second (fps) var to 25 or 30 makes much more sense.
Fine fine. I buy that rationale.
regards,
dan carpenter
--
To unsubscribe from this
Hi!
>
> Can you guys please test this still works? I've only been able
> to test that it compiles/loads/unloads as my n900 in in a rack.
>
I guess Pali (To:) is the right person to test this? My n900 is in my
pocket, but I've never used this functionality before (and would have
to set up the
Add a helper function for device drivers to set DMA's max_seg_size.
Setting it to largest possible value lets DMA-mapping API always create
contiguous mappings in DMA address space. This is essential for all
devices, which use dma-contig videobuf2 memory allocator and shared
buffers.
Hmm
Em Wed, 27 Apr 2016 08:01:19 -0300
Mauro Carvalho Chehab escreveu:
> Instead of using two tables to estimate the temporal decimation
> factor, use a formula. This allows to get the closest fps, with
> sounds better than the current tables.
>
> Compile-tested
Hi Shuah,
Good work! I have a few notes below.
Em Tue, 26 Apr 2016 21:08:32 -0600
Shuah Khan escreveu:
> When driver unbind is run while media_ioctl is in progress, media_ioctl()
> fails with use-after-free. This first use-after-free is followed by more
>
The > ARRAY_SIZE() should be >= ARRAY_SIZE(). Also this is a slightly
unrelated cleanup but I replaced the magic numbers 30 and 25 with
ARRAY_SIZE() - 1.
Fixes: 363d79f1d5bd ('[media] tw686x: Don't go past array')
Signed-off-by: Dan Carpenter
diff --git
Hi!
> After taking a nap, a question came to my mind - what is that device you're
> using? As some early board versions use VAUX3 for cameras as well.
I got used N900 from a friend. It had czech keyboard, originally, so I
believe it should be regular version, not early one...
Best regards,
Hello,
On 2016-04-27 14:58, Hans Verkuil wrote:
On 04/27/2016 02:23 PM, Marek Szyprowski wrote:
Hello,
On 2016-04-27 14:10, Hans Verkuil wrote:
On 04/27/2016 02:00 PM, Marek Szyprowski wrote:
Add a helper function for device drivers to set DMA's max_seg_size.
Setting it to largest
Hi Mauro,
On 04/27/2016 03:55 AM, Mauro Carvalho Chehab wrote:
> Hi Shuah,
>
> Good work! I have a few notes below.
>
> Em Tue, 26 Apr 2016 21:08:32 -0600
> Shuah Khan escreveu:
>
>> When driver unbind is run while media_ioctl is in progress, media_ioctl()
>> fails
On 04/27/2016 03:14 PM, Marek Szyprowski wrote:
> Hello,
>
>
> On 2016-04-27 14:58, Hans Verkuil wrote:
>> On 04/27/2016 02:23 PM, Marek Szyprowski wrote:
>>> Hello,
>>>
>>>
>>> On 2016-04-27 14:10, Hans Verkuil wrote:
On 04/27/2016 02:00 PM, Marek Szyprowski wrote:
> Add a helper
On 04/27/2016 02:00 PM, Marek Szyprowski wrote:
> Add a helper function for device drivers to set DMA's max_seg_size.
> Setting it to largest possible value lets DMA-mapping API always create
> contiguous mappings in DMA address space. This is essential for all
> devices, which use dma-contig
Hello,
On 2016-04-27 14:10, Hans Verkuil wrote:
On 04/27/2016 02:00 PM, Marek Szyprowski wrote:
Add a helper function for device drivers to set DMA's max_seg_size.
Setting it to largest possible value lets DMA-mapping API always create
contiguous mappings in DMA address space. This is
On 04/27/2016 02:23 PM, Marek Szyprowski wrote:
> Hello,
>
>
> On 2016-04-27 14:10, Hans Verkuil wrote:
>> On 04/27/2016 02:00 PM, Marek Szyprowski wrote:
>>> Add a helper function for device drivers to set DMA's max_seg_size.
>>> Setting it to largest possible value lets DMA-mapping API always
On 04/27/2016 02:00 PM, Marek Szyprowski wrote:
> All multimedia devices found on Exynos SoCs support only contiguous
> buffers, so set DMA max segment size to DMA_BIT_MASK(32) to let memory
> allocator to correctly create contiguous memory mappings.
>
> Signed-off-by: Marek Szyprowski
There are some issues with the old code:
1) it uses two static tables;
2) some values for 50Hz standards are wrong;
3) it doesn't store the real framerate.
This patch fixes the above issues.
Compile-tested only.
Signed-off-by: Mauro Carvalho Chehab
On Tue, Apr 12, 2016 at 4:46 PM, Jonathan Corbet wrote:
> On Fri, 8 Apr 2016 17:12:27 +0200
> Markus Heiser wrote:
>
>> motivated by this MT, I implemented a toolchain to migrate the kernel’s
>> DocBook XML documentation to reST markup.
>>
>> It
45 matches
Mail list logo