-Original Message-
From: Karicheri, Muralidharan
Sent: Friday, October 16, 2009 7:53 PM
To: Hiremath, Vaibhav; linux-media@vger.kernel.org
Subject: RE: [PATCH 5/6] Davinci VPFE Capture: Add support for
Control ioctls
Murali Karicheri
Software Design Engineer
Texas
Hi,
This patch adds support for Maxim MAX2165 silicon tuner.
It is tested on Mygica X8558Pro, which has MAX2165, ATBM8830 and CX23885
Regards
David
Signed-off-by: David T. L. Wong davidtlw...@gmail.com
changeset: 13165:1371c005205b
tag: tip
user:David T.L. Wong
-Original Message-
From: rath [mailto:maili...@web150.mis07.de]
Sent: Friday, October 23, 2009 7:58 PM
To: linux-media@vger.kernel.org
Cc: Hiremath, Vaibhav
Subject: Re: cpu load of webcam read out with omap3/beagleboard
Nobody has an idea? I think this cpu load isn't normal,
Hi,
I'm trying to support the analog part of Pinnacle PCTV310e, which is an
ULI M9207 based card; by now I added the support for the digital side
patching the M920x driver; in order to add the analog part the driver
should be almost completely rewritten, and it'll take more source files,
so it
If vpfe_dev-std_index equals ARRAY_SIZE(vpfe_standards), that is
one too large
Signed-off-by: Roel Kluin roel.kl...@gmail.com
---
drivers/media/video/davinci/vpfe_capture.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/media/video/davinci/vpfe_capture.c
Hi,
This patch adds support for Maxim MAX2165 silicon tuner.
It is tested on Mygica X8558Pro, which has MAX2165, ATBM8830 and CX23885
Regards,
David
Signed-off-by: David T. L. Wong davidtlw...@gmail.com
changeset: 13167:af24d868416c
user:David T.L. Wong davidtlw...@gmail.com
Hi,
On 10/26/2009 12:52 PM, Alexey Fisher wrote:
Am Sonntag, den 25.10.2009, 14:21 +0100 schrieb Hans de Goede:
Hi,
On 10/25/2009 02:02 PM, Alexey Fisher wrote:
Am Sonntag, den 25.10.2009, 13:17 +0100 schrieb Hans de Goede:
Hi,
On 10/22/2009 09:40 AM, Alexey Fisher wrote:
Hi Laurent,
Roel,
Thanks for fixing this.
Mauro,
Could you merge this please?
Acked-by Muralidharan Karicheri m-kariche...@ti.com
Murali Karicheri
Software Design Engineer
Texas Instruments Inc.
Germantown, MD 20874
phone: 301-407-9583
email: m-kariche...@ti.com
-Original Message-
From: Roel
Terve Devin,
On 10/26/2009 05:36 PM, Devin Heitmueller wrote:
Hello Antti,
Sorry, I'm a couple of days behind on email.
On Sun, Oct 25, 2009 at 2:23 PM, Antti Palosaaricr...@iki.fi wrote:
Reddo DVB-C USB Box works fine with this patch. But whats the status of this
patch, when this is going
On Mon, Oct 26, 2009 at 12:02 PM, Antti Palosaari cr...@iki.fi wrote:
Is there any way to speed up Empia to handle streams bigger than ~45
Mbit/sec?
Can you add a debug line that dumps out the values of register 0x01
and register 0x5d and then send me the values?
Devin
--
Devin J.
-Original Message-
From: Alexey Klimov [mailto:klimov.li...@gmail.com]
Sent: Sunday, October 18, 2009 2:38 PM
To: Hiremath, Vaibhav
Cc: linux-media@vger.kernel.org; Jadav, Brijesh R; Shah, Hardik
Subject: Re: [PATCH 4/4] OMAP2/3 V4L2: Add support for OMAP2/3 V4L2
driver on top of
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Mon Oct 26 19:00:03 CET 2009
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 13164:c4beabacadb3
gcc version: gcc
Santiago Nunez-Corrales snu...@ridgerun.com writes:
Kevin Hilman wrote:
santiago.nu...@ridgerun.com writes:
From: Santiago Nunez-Corrales santiago.nu...@ridgerun.com
This patch provides support for TVP7002 in architecture definitions
within DM365.
Signed-off-by: Santiago
I can't seem to get my HVR-2250 (rev. 88061) card to tune any
channels. I have Comcast digital cable, and my VIZIO VL370M
television is able to tune all of the QAM channels, so I know that the
signal is present and is usable (in theory). I have tried scanning
for channels in Mythbuntu 9.10 RC
2009/10/26 dan danwalke...@gmail.com:
I can't seem to get my HVR-2250 (rev. 88061) card to tune any
channels. I have Comcast digital cable, and my VIZIO VL370M
television is able to tune all of the QAM channels, so I know that the
signal is present and is usable (in theory). I have tried
David T. L. Wong wrote:
Hi Mauro,
Please pull from,
http://bitbucket.org/davidtlwong/mygica_x850x_hybrid
for following changeset:
- cx25840: add component support
- cx23885: add component input type
- cx23885: fix uninitialized member bug
- cx23885: card mygica x8506 add analog video input
On Sunday 25 of October 2009 at 21:44:20, Magnus Alm wrote:
Hi!
Hi Magnus,
This is on Ubuntu 9.04, kernel 2.6.28-16.
I get the following in dmesg when pressing channel down on my remote:
[ 3517.984559] : unknown key: key=0x90 raw=0x90 down=1
[ 3518.096558] : unknown key: key=0x90 raw=0x90
17 matches
Mail list logo