Hi Basil:
I ran the following command line with my Logitech 5000:
gst-launch-0.10 v4l2src device=/dev/video0 ! 'image/jpeg, width=640,
height=480, framerate=30/1' ! multifilesink location=frame%.4d.jpg
I let it run for 5 seconds or so and then cancel it. When done I had a bit
more than
Hi Dmitri,
I did a quick review and I have a few very small things that should be
adjusted.
On Tuesday 16 March 2010 03:50:59 Dmitri Belimov wrote:
Hi
Add support SPI bus to v4l2. Useful for control some device with SPI bus like
hardware MPEG2 encoders and etc.
diff -r b6b82258cf5e
On Monday 15 March 2010 09:56:35 Guennadi Liakhovetski wrote:
On Sun, 14 Mar 2010, Hans Verkuil wrote:
Review notes below...
On Thursday 11 March 2010 11:25:42 Guennadi Liakhovetski wrote:
AK8814 only differs from AK8813 by included Macrovision Copy Protection
function. This patch
This is a regression of
7d58289 (mx1: prefix SOC specific defines with MX1_ and deprecate old
names)
Signed-off-by: Uwe Kleine-König u.kleine-koe...@pengutronix.de
---
arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h |4 +++-
drivers/media/video/mx1_camera.c |8 +++-
David Kubicek wrote:
On 03/10/2010 05:05 PM, Oliver Endriss wrote:
Mauro,
Please pull from http://endr...@linuxtv.org/hg/~endriss/ngene
for the following changeset:
01/01: ngene: Add support for cineS2 v5 and SaTiX-S2 Dual v2
Andy Walls wrote:
On Mon, 2010-03-15 at 14:26 -0300, Mauro Carvalho Chehab wrote:
Hans Verkuil wrote:
Hans Verkuil wrote:
Pawel Osciak wrote:
is anyone aware of any other uses for MAGIC_CHECK()s in videobuf code
besides driver debugging? I intend to remove them, as we weren't able
to
On Tue, 16 Mar 2010, Uwe Kleine-König wrote:
This is a regression of
7d58289 (mx1: prefix SOC specific defines with MX1_ and deprecate old
names)
Signed-off-by: Uwe Kleine-König u.kleine-koe...@pengutronix.de
---
arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h |4 +++-
On Tue, 2010-03-16 at 00:49 -0400, Mark Lord wrote:
On 03/15/10 07:51, Andy Walls wrote:
On Sun, 2010-03-14 at 22:48 -0400, Mark Lord wrote:
If the audio is not working after modprobe, then simply doing
rmmod/modprobe
in a loop (until working audio is achieved) is enough to cure it.
..
Hi Mauro,
Sorry, again. Please forget this pull request.
in the git repository at:
git://linuxtv.org/jfrancois/gspca.git for_2.6.35
Olivier Lorin (2):
gspca - gl860: Updates to prepare the new driver for MI2020
sensor.
gspca - gl860: New driver for MI2020 sensor.
Thanks.
--
On 03/16/2010 02:30 AM, John Selbie wrote:
Hi Basil:
I ran the following command line with my Logitech 5000:
gst-launch-0.10 v4l2src device=/dev/video0 ! 'image/jpeg, width=640,
height=480, framerate=30/1' ! multifilesink location=frame%.4d.jpg
I let it run for 5 seconds or so and then
Mauro Carvalho Chehab wrote:
is anyone aware of any other uses for MAGIC_CHECK()s in videobuf code
besides driver debugging? I intend to remove them, as we weren't able
to find any particular use for them when we were discussing this at
the memory handling meeting in Norway...
It is a sort of
Andy Walls wrote:
On Mon, 2010-03-15 at 14:26 -0300, Mauro Carvalho Chehab wrote:
Hans Verkuil wrote:
Hans Verkuil wrote:
Pawel Osciak wrote:
is anyone aware of any other uses for MAGIC_CHECK()s in videobuf
code
besides driver debugging? I intend to remove them, as we weren't
able
On Tue, Mar 16, 2010 at 12:35 PM, Hans Verkuil hverk...@xs4all.nl wrote:
That is my opinion, yes. However, there is one case where this is actually
useful. Take for example the function videobuf_to_dma in
videobuf-dma-sg.c. This is called by drivers and it makes sense that that
function should
Mauro,
Oops sorry about forgetting my SOB line on ht e last pull request.
This series has been updated with the proper SOB line.
The following changes since commit 52744e816710ed65e6fc34b79149268d95b2ebdf:
Hans Verkuil (1):
V4L/DVB: v4l2: sort chip IDs in v4l2-chip-ident.h
are
On 03/15/2010 05:15 AM, Devin Heitmueller wrote:
I've done essentially no analysis into the tuning performance of the
current driver - validating different frequency ranges and modulation
types or bandwidths. I've done no testing of tuning lock time,
minimal application validation
Well, so
Am 13.3.2010 17:27, schrieb Hans Verkuil:
If there are no further comments, then I'll post a pull request in a few days.
Tested with the mxb board. It would be nice if you can verify this with the
av7110.
Hi hans,
it works with my TT-C2300 perfectly. The main problem of your changes was: It
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Tue Mar 16 19:00:16 CET 2010
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 14492:749f7ddc61ab
git master:
Hi Alex,
Am Montag, den 08.03.2010, 12:21 +0200 schrieb Alex Kasayev:
Team,
I would to inform you about my experience with Kworld
DVB-T 210SE under Linux. It partially works only when I reboot
computer from Win to Linux. If I power-on and boot Linux first -
it not working at all and
Hello,
I'm puzzled to know if the pxa_camera driver can manage a data depth
different from 8 bits.
I'm currently trying to add a camera interface support to my PXA270
based board with an adv7180 as soc camera device.
For the adv7180 I defined:
static const struct soc_camera_data_format
On 03/16/2010 02:30 AM, John Selbie wrote:
Hi Basil:
I ran the following command line with my Logitech 5000:
gst-launch-0.10 v4l2src device=/dev/video0 ! 'image/jpeg, width=640,
height=480, framerate=30/1' ! multifilesink location=frame%.4d.jpg
I let it run for 5 seconds or so and then
Hi
Add support SPI bus to v4l2. Useful for control some device with SPI bus like
hardware MPEG2 encoders and etc.
Small patch rework after reply from Hans.
diff -r b6b82258cf5e linux/drivers/media/video/v4l2-common.c
--- a/linux/drivers/media/video/v4l2-common.c Thu Dec 31 19:14:54 2009 -0200
I just purchased some Hauppauge HVR-1800 cards. They work fine in these
two PCIe slots:
:06:00.0
:09:00.0
These are PCI Express* Gen1 slots (see details below); the others are
PCI Express* Gen2.
When I place a card in one of these Gen2 slots, the card does not show up.
What's
22 matches
Mail list logo