Hi Kamil!
On Monday 29 March 2010 11:53:05 Kamil Debski wrote:
Hello,
This patch introduces new type of v4l2 control - the binary control. It
will be useful for exchanging raw binary data between the user space and
the driver/hardware.
The patch is pretty small – basically it adds a
Hi
The hybrid tuner FMD1216MEX_MK3 after cold start has disabled IF.
This tuner has internal I2C switch. This switch switch I2C bus between DVB-T
and IF part.
Default state is DVB-T. When module saa7134 is load it can't find IF tda9887
and disable
analog TV mode.
This patch set internal I2C
Hi Hans,
On Tuesday 30 March 2010 08:41:47 Hans Verkuil wrote:
On Monday 29 March 2010 11:53:05 Kamil Debski wrote:
Hello,
This patch introduces new type of v4l2 control - the binary control. It
will be useful for exchanging raw binary data between the user space and
the
-Original Message-
From: Mauro Carvalho Chehab [mailto:mche...@redhat.com]
Sent: Wednesday, March 24, 2010 5:32 PM
To: Laurent Pinchart
Cc: Karicheri, Muralidharan; Hiremath, Vaibhav; davinci-linux-open-
sou...@linux.davincidsp.com; linux-media@vger.kernel.org
Subject: Re:
Hi,
Am Dienstag, den 30.03.2010, 16:02 +1000 schrieb Dmitri Belimov:
Hi
The hybrid tuner FMD1216MEX_MK3 after cold start has disabled IF.
This tuner has internal I2C switch. This switch switch I2C bus between DVB-T
and IF part.
Default state is DVB-T. When module saa7134 is load it can't
On Wednesday 24 March 2010 06:43:22, Sakari Ailus wrote:
Hi Arnout,
Thanks for the patch.
Arnout Vandecappelle wrote:
[snip]
- dma_sync_sg_for_cpu(q-dev, dma-sglist, dma-nr_pages,
dma-direction);
+ dma_sync_sg_for_cpu(q-dev, dma-sglist, dma-sglen, dma-direction);
I think the
On Sun, Mar 28, 2010 at 09:51:17PM -0300, Mauro Carvalho Chehab wrote:
I spoke too soon... removing the index causes a problem at the read ioctl:
there's no way
to retrieve just the non-sparsed values.
There's one solution that would allow both read/write and compat to work
nicely,
but
On Sun, Mar 28, 2010 at 08:22:31PM -0300, Mauro Carvalho Chehab wrote:
I also noticed another problem: kernel should have some way to report
the expected
size of the scancode to userspace, especially if we want to have the
compatibility
code (since, with compat, a scancode maximum size need
On Tue, 2010-03-30 at 10:57 +0200, Laurent Pinchart wrote:
Hi Hans,
On Tuesday 30 March 2010 08:41:47 Hans Verkuil wrote:
On Monday 29 March 2010 11:53:05 Kamil Debski wrote:
Hello,
This patch introduces new type of v4l2 control - the binary control. It
will be useful for
From: Hans Verkuil [mailto:hverk...@xs4all.nl]
Hi Kamil!
Hi Hans,
On Monday 29 March 2010 11:53:05 Kamil Debski wrote:
Hello,
This patch introduces new type of v4l2 control - the binary control.
It
will be useful for exchanging raw binary data between the user space
and
the
Hans,
But this just feels like an i2c core thing to me. After remove() is called
the core should just set the client data to NULL. If there are drivers that
rely on the current behavior, then those drivers should be reviewed first as
to the reason why they need it.
It will be done this way
David Härdeman wrote:
On Sun, Mar 28, 2010 at 08:22:31PM -0300, Mauro Carvalho Chehab wrote:
I also noticed another problem: kernel should have some way to report
the expected
size of the scancode to userspace, especially if we want to have the
compatibility
code (since, with compat, a
Kamil Debski wrote:
From: Hans Verkuil [mailto:hverk...@xs4all.nl]
Hi Kamil!
Hi Hans,
On Monday 29 March 2010 11:53:05 Kamil Debski wrote:
Hello,
This patch introduces new type of v4l2 control - the binary control.
It
will be useful for exchanging raw binary data between the user
Hi Kamil,
On Tuesday 30 March 2010 14:26:00 Kamil Debski wrote:
From: Hans Verkuil [mailto:hverk...@xs4all.nl]
On Monday 29 March 2010 11:53:05 Kamil Debski wrote:
Hello,
This patch introduces new type of v4l2 control - the binary control. It
will be useful for exchanging raw
On Tue, Feb 23, 2010 at 12:19:13AM +0100, Richard Röjfors wrote:
We use it as a subdev to a driver not yet committed from us. So I think
you should extend it, not move it.
Finally I got something functional... but I'm puzzled to know how I
can add platform data configuration struct by using
Hi Mauro,
Mauro Carvalho Chehab wrote:
Kamil Debski wrote:
From: Hans Verkuil [mailto:hverk...@xs4all.nl]
Hi Kamil!
Hi Hans,
On Monday 29 March 2010 11:53:05 Kamil Debski wrote:
Hello,
This patch introduces new type of v4l2 control - the binary
control.
It
will be useful
On Tue, 30 Mar 2010, Rodolfo Giometti wrote:
On Tue, Feb 23, 2010 at 12:19:13AM +0100, Richard Röjfors wrote:
We use it as a subdev to a driver not yet committed from us. So I think
you should extend it, not move it.
Finally I got something functional... but I'm puzzled to know how I
Kamil Debski wrote:
Hi Mauro,
Mauro Carvalho Chehab wrote:
Kamil Debski wrote:
From: Hans Verkuil [mailto:hverk...@xs4all.nl]
Hi Kamil!
Hi Hans,
On Monday 29 March 2010 11:53:05 Kamil Debski wrote:
Hello,
This patch introduces new type of v4l2 control - the binary
control.
It
will
This patch looks good, but there was one other thing that caught my eye.
In s2255_probe_v4l, video_device_alloc is called for each video
device, which is nothing more than a call to kzalloc, but the result
of the call is never verified.
Given that this driver has a fixed number of video device
On Tue, Mar 30, 2010 at 04:40:17PM +0200, Guennadi Liakhovetski wrote:
On Tue, 30 Mar 2010, Rodolfo Giometti wrote:
On Tue, Feb 23, 2010 at 12:19:13AM +0100, Richard Röjfors wrote:
We use it as a subdev to a driver not yet committed from us. So I think
you should extend it, not move
/video/gspca/gspca.h |6 +++---
2 files changed, 21 insertions(+), 8 deletions(-)
--- linux-next-20100330.orig/drivers/media/video/gspca/gspca.c
+++ linux-next-20100330/drivers/media/video/gspca/gspca.c
@@ -40,7 +40,7 @@
#include gspca.h
-#ifdef CONFIG_INPUT
+#if defined(CONFIG_INPUT
On Mon, Mar 29, 2010 at 08:06:40PM +0200, Stefan Ringel wrote:
Can you scan a cannel list? If yes, then have you the right audio and video
setting in vlc? And if you use Kaffeine? The log looks ok, dvb signal has it,
streams and feed is on.
For some reason I can't get the dvbscan tool
On 03/30/10 11:02, Ricardo Maraschini wrote:
When compiling the last version of v4l-dvb tree I got the following message:
/data/Projects/kernel/v4l-dvb/v4l/dib7000p.c: In function
'dib7000p_i2c_enumeration':
/data/Projects/kernel/v4l-dvb/v4l/dib7000p.c:1393: warning: the frame size of
George Tellalov wrote:
On Mon, Mar 29, 2010 at 08:06:40PM +0200, Stefan Ringel wrote:
Can you scan a cannel list? If yes, then have you the right audio and video
setting in vlc? And if you use Kaffeine? The log looks ok, dvb signal has
it, streams and feed is on.
For some reason I
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Tue Mar 30 19:00:20 CEST 2010
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 14536:a539e5b68945
git master:
Thanks for this and the other feedback.
The concern, without knowing the full history, is if video_device_alloc
changes to do more than just allocate the whole structure with a single
call to kzalloc? Otherwise, why have this extra indirection and
overhead in most V4L drivers?
The majority
On Tuesday 30 March 2010 22:49:08 dean wrote:
Thanks for this and the other feedback.
The concern, without knowing the full history, is if video_device_alloc
changes to do more than just allocate the whole structure with a single
call to kzalloc? Otherwise, why have this extra indirection
On Tuesday 30 March 2010 23:09:49 Hans Verkuil wrote:
On Tuesday 30 March 2010 22:49:08 dean wrote:
Thanks for this and the other feedback.
The concern, without knowing the full history, is if video_device_alloc
changes to do more than just allocate the whole structure with a single
Hi,
After suspend/resume, I have my webcam no more working.
The /dev/video0 file still exist, but the webcam won't be used until I do this :
rmmod uvcvideo
modprobe uvcvideo
(2.6.31.8-0.1)
This is may be caused by a bug somewhere.
These are more information about my hardware :
I have
Hi Mohamed,
On Tuesday 30 March 2010 23:55:38 Mohamed Ikbel Boulabiar wrote:
Hi,
After suspend/resume, I have my webcam no more working.
The /dev/video0 file still exist, but the webcam won't be used until I do
this : rmmod uvcvideo
modprobe uvcvideo
(2.6.31.8-0.1)
This is may be
Hi Hans,
See my inline comment.
Xiaolin
-Original Message-
From: Hans Verkuil [mailto:hverk...@xs4all.nl]
Sent: Monday, March 29, 2010 2:41 PM
To: Zhang, Xiaolin
Cc: linux-media@vger.kernel.org; Zhu, Daniel; Yu, Jinlu; Wang, Wen W; Huang,
Kai; Hu, Gang A; Ba, Zheng; Pawel Osciak
Hi Hermann
Hi,
Am Dienstag, den 30.03.2010, 16:02 +1000 schrieb Dmitri Belimov:
Hi
The hybrid tuner FMD1216MEX_MK3 after cold start has disabled IF.
This tuner has internal I2C switch. This switch switch I2C bus
between DVB-T and IF part. Default state is DVB-T. When module
May you elaborate about the huge undertaking
Fernando.
2010/3/3 RoboSK ucet.na.disku...@gmail.com:
Hi, i find this page *1 with last change from 3 May 2009 with text no
driver written for the CX25843-24Z and then this *2 from 27 September
2009 with text CX2584x chips are fully supported
Hello Sergei,
Krivchikov Sergei wrote:
Hi!
I have a Genius iSlim 310 webcam and linux ubuntu 9.10 kernel 2.6.31. My
developer level under linux - beginner (very beginner) :) but i'm ready
to test this webcam undr linux. But I need the instructions:) How was
your success in the launch of this
34 matches
Mail list logo
