On Wed, 26 Nov 2014, Hans de Goede wrote:
Hi,
On 11/25/2014 05:57 PM, Lee Jones wrote:
On Sun, 23 Nov 2014, Hans de Goede wrote:
Add a driver for mod0 clocks found in the prcm. Currently there is only
one mod0 clocks in the prcm, the ir clock.
Signed-off-by: Hans de Goede
Hi Laurent,
On 11/26/2014 09:01 PM, Laurent Pinchart wrote:
Hi Hans,
Thank you for the patch.
On Tuesday 18 November 2014 13:51:01 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
Require that dma-sg also uses an allocation context. This is in preparation
for adding
Hi,
On 11/26/2014 10:13 PM, Maxime Ripard wrote:
Hi,
On Tue, Nov 25, 2014 at 09:29:21AM +0100, Hans de Goede wrote:
Hi,
On 11/24/2014 11:03 PM, Maxime Ripard wrote:
On Fri, Nov 21, 2014 at 10:13:10AM +0100, Hans de Goede wrote:
Hi,
On 11/21/2014 09:49 AM, Maxime Ripard wrote:
Hi,
On
Hi Jacek,
Thank you for the patch.
One generic question: how do you support flash controllers with multiple
flash LEDs? I thought that once was a part of the patchset?
On Wed, Nov 12, 2014 at 05:09:16PM +0100, Jacek Anaszewski wrote:
Some LED devices support two operation modes - torch and
On 11/26/2014 09:43 PM, Laurent Pinchart wrote:
Hi Hans,
Thank you for the patch.
On Tuesday 18 November 2014 13:51:02 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
This moves dma_(un)map_sg to the get_userptr/put_userptr and alloc/put
memops of videobuf2-dma-sg.c and
Hi Jacek,
On Fri, Nov 21, 2014 at 05:14:40PM +0100, Jacek Anaszewski wrote:
The plugin provides support for the media device on Exynos4 SoC.
It performs single plane - multi plane API conversion,
video pipeline linking and takes care of automatic data format
negotiation for the whole
Hi Laurent,
On 11/26/2014 10:00 PM, Laurent Pinchart wrote:
Hi Hans,
Thank you for the patch.
On Tuesday 18 November 2014 13:51:03 Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
Add support for importing dmabuf to videobuf2-dma-sg.
Signed-off-by: Hans Verkuil
Hi Ismael,
Can you make a patch on top of Andrey's earlier patch? That one is already
accepted for 3.18.
Regards,
Hans
On 11/27/2014 07:11 AM, Ismael Luceno wrote:
Adding Andrey Utkin, and I'll be using my personal email address from
now on.
Signed-off-by: Ismael Luceno
On Sun, Nov 23, 2014 at 02:38:14PM +0100, Hans de Goede wrote:
Add pinmux settings for the ir receive pin of the A31.
Signed-off-by: Hans de Goede hdego...@redhat.com
Applied, thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
Hi,
On Thu, Nov 27, 2014 at 4:41 PM, Hans de Goede hdego...@redhat.com wrote:
Hi,
On 11/26/2014 10:13 PM, Maxime Ripard wrote:
Hi,
On Tue, Nov 25, 2014 at 09:29:21AM +0100, Hans de Goede wrote:
Hi,
On 11/24/2014 11:03 PM, Maxime Ripard wrote:
On Fri, Nov 21, 2014 at 10:13:10AM
On 11/26/2014 11:51 PM, Benjamin Larsson wrote:
Add xtal as a configuration parameter so it can be used
in the IF register value calculation.
Signed-off-by: Benjamin Larsson benja...@southpole.se
Reviewed-by: Antti Palosaari cr...@iki.fi
Antti
--
http://palosaari.fi/
--
To unsubscribe from
On 11/26/2014 11:51 PM, Benjamin Larsson wrote:
Signed-off-by: Benjamin Larsson benja...@southpole.se
Reviewed-by: Antti Palosaari cr...@iki.fi
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to
Hi,
On 11/27/2014 10:28 AM, Chen-Yu Tsai wrote:
Hi,
On Thu, Nov 27, 2014 at 4:41 PM, Hans de Goede hdego...@redhat.com wrote:
snip
I notice that you've not responded to my proposal to simple make the clock
node a child node of the clocks node in the dt, that should work nicely, and
avoid
Signed-off-by: Geert Uytterhoeven geert+rene...@glider.be
Cc: Mauro Carvalho Chehab mche...@osg.samsung.com
Cc: linux-media@vger.kernel.org
---
drivers/media/dvb-frontends/cx24117.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/media/dvb-frontends/cx24117.c
Changes since RFCv1:
- Added the adv7511 patch (so that this is used in a real driver)
- Made some small improvements to the DocBook patch (improved the xyY
colorspace description, added links to other colorspace resources
and mention the opRGB (aka AdobeRGB) standard.
This patch series
From: Hans Verkuil hans.verk...@cisco.com
Add support for the new AdobeRGB and BT.2020 colorspaces as needed for
HDMI 2.0.
Add support to specify the Y'CbCr encoding and quantization range explicitly.
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
---
include/uapi/linux/videodev2.h | 99
From: Hans Verkuil hans.verk...@cisco.com
Log the new ycbcr_enc and quantization fields. Note that it now
also logs the flags field for the multiplanar buffer type. This was
forgotten when the flags field was added.
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
---
From: Hans Verkuil hans.verk...@cisco.com
Add and copy the new ycbcr_enc and quantization fields.
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
---
include/media/v4l2-mediabus.h | 4
include/uapi/linux/v4l2-mediabus.h | 6 +-
2 files changed, 9 insertions(+), 1 deletion(-)
From: Hans Verkuil hans.verk...@cisco.com
Add support for the new AdobeRGB and BT.2020 colorspaces. Also support
explicit Y'CbCr and quantization settings.
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
---
drivers/media/platform/vivid/vivid-tpg.c | 327 +--
From: Hans Verkuil hans.verk...@cisco.com
This extends the precalculated tpg_csc_colors matrix with AdobeRGB and BT.2020
colorspace support.
It also adds two precalculated tables that convert between linear RGB and
non-linear
Rec.709 R'G'B' values, i.e. the Rec. 709 transfer function. This is
From: Hans Verkuil hans.verk...@cisco.com
The colorspace chapter in the V4L2 Specification was always poorly
written. This patch rewrites it, documenting the new Y'CbCr encoding
and quantization defines and going into much more detail with respect
to how colorspaces are used and what it all
From: Hans Verkuil hans.verk...@cisco.com
Add support for YCbCr output and support setting colorspace,
YCbCr encoding and quantization for the AVI InfoFrame.
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
---
drivers/media/i2c/adv7511.c | 199
1
From: Hans Verkuil hans.verk...@cisco.com
Add AdobeRGB and BT.2020 support.
The colorspace control now orders the colorspaces according to how often
they are used. So rarely used colorspaces are moved to the end. This makes
it more logical when testing colorspace support.
Signed-off-by: Hans
From: Hans Verkuil hans.verk...@cisco.com
Implement controls to set the YCbCr encoding and the quantization
range for the colorspace.
Signed-off-by: Hans Verkuil hans.verk...@cisco.com
---
drivers/media/platform/vivid/vivid-core.h | 2 +
drivers/media/platform/vivid/vivid-ctrls.c |
Hi,
On Tue, 18 Nov 2014 14:46:17 +0100
Boris Brezillon boris.brezil...@free-electrons.com wrote:
Hello,
This series makes use of the MEDIA_BUS_FMT definition to describe how
the data are transmitted to the display.
This will allow drivers to configure their output display bus according
Hi,
On Wed, 26 Nov 2014 22:13:18 +0100
Maxime Ripard maxime.rip...@free-electrons.com wrote:
[...]
I remember someone (Chen-Yu? Boris?) saying that the 1wire clock was
not really a mod0 clk. From what I could gather from the source code,
it seems to have a wider m divider, so we could
Hi Philipp,
2014-11-26 18:31 GMT+01:00 Jean-Michel Hautbois
jean-michel.hautb...@vodalys.com:
Hi Philipp,
Thanks for answering.
2014-11-26 17:55 GMT+01:00 Philipp Zabel p.za...@pengutronix.de:
Hi Jean-Michel,
Am Mittwoch, den 26.11.2014, 14:33 +0100 schrieb Jean-Michel Hautbois:
Hi,
We
On Thu, Nov 27, 2014 at 3:54 PM, Jean-Michel Hautbois
jean-michel.hautb...@vodalys.com wrote:
I don't have the same behaviour, but I may have missed a patch.
I have taken linux-next and rebased my work on it. I have some issues,
but nothing to be worried about, no link with coda.
I get the
On Wed, Nov 26, 2014 at 10:26 AM, Mauro Carvalho Chehab
mche...@osg.samsung.com wrote:
As reported by smatch:
drivers/media/tuners/tda18271-common.c:176 tda18271_read_extended()
warn: if statement not indented
Signed-off-by: Mauro Carvalho Chehab mche...@osg.samsung.com
diff --git
On Thu, Nov 27, 2014 at 09:41:09AM +0100, Hans de Goede wrote:
Hi,
On 11/26/2014 10:13 PM, Maxime Ripard wrote:
Hi,
On Tue, Nov 25, 2014 at 09:29:21AM +0100, Hans de Goede wrote:
Hi,
On 11/24/2014 11:03 PM, Maxime Ripard wrote:
On Fri, Nov 21, 2014 at 10:13:10AM +0100, Hans de Goede
Em Thu, 27 Nov 2014 13:47:09 -0500
Michael Ira Krufky mkru...@linuxtv.org escreveu:
On Wed, Nov 26, 2014 at 10:26 AM, Mauro Carvalho Chehab
mche...@osg.samsung.com wrote:
As reported by smatch:
drivers/media/tuners/tda18271-common.c:176 tda18271_read_extended()
warn: if statement
On Thu, Nov 27, 2014 at 1:59 PM, Mauro Carvalho Chehab
mche...@osg.samsung.com wrote:
Em Thu, 27 Nov 2014 13:47:09 -0500
Michael Ira Krufky mkru...@linuxtv.org escreveu:
On Wed, Nov 26, 2014 at 10:26 AM, Mauro Carvalho Chehab
mche...@osg.samsung.com wrote:
As reported by smatch:
Hi,
On Thu, Nov 27, 2014 at 11:10:51AM +0100, Hans de Goede wrote:
Hi,
On 11/27/2014 10:28 AM, Chen-Yu Tsai wrote:
Hi,
On Thu, Nov 27, 2014 at 4:41 PM, Hans de Goede hdego...@redhat.com wrote:
snip
I notice that you've not responded to my proposal to simple make the clock
node a
Hi Hayama-san,
Thank you for the patch.
On Thursday 27 November 2014 10:25:01 Takanari Hayama wrote:
Source address of VSP1 RPF needs to be reset whenever crop offsets are
recalculated.
This correctly reflects a crop setting even VIDIOC_QBUF is called
before VIDIOIC_STREAMON is called.
On Thu, Nov 27, 2014 at 05:40:56PM +0100, Boris Brezillon wrote:
Hi,
On Wed, 26 Nov 2014 22:13:18 +0100
Maxime Ripard maxime.rip...@free-electrons.com wrote:
[...]
I remember someone (Chen-Yu? Boris?) saying that the 1wire clock was
not really a mod0 clk. From what I could gather
A debug printout for firmware version.
Signed-off-by: Olli Salonen olli.salo...@iki.fi
---
drivers/media/dvb-frontends/si2168.c | 11 +++
1 file changed, 11 insertions(+)
diff --git a/drivers/media/dvb-frontends/si2168.c
b/drivers/media/dvb-frontends/si2168.c
index bec3aa5..6da38e8
This patch adds support for new type of firmware versions of Si2168 chip.
Old type: n x 8 bytes (all data, first byte seems to be 04 or 05)
New type: n x 17 bytes (1 byte indicates len and max 16 bytes data)
New version of TechnoTrend CT2-4400 drivers
Hi Hayama-san,
Thank you for the patch.
On Thursday 27 November 2014 10:25:02 Takanari Hayama wrote:
Regardless of a number of inputs, we should always enable virtual RPF
when BRU is used. This allows the case when there's only one input to
BRU, and a size of the input is smaller than a size
Hi Josh,
On Thu, 27 Nov 2014, Josh Wu wrote:
Hi, Guennadi
On 11/26/2014 6:23 AM, Guennadi Liakhovetski wrote:
Hi Josh,
On Tue, 25 Nov 2014, Josh Wu wrote:
Add SVGA, UXGA and XGA size definitions to v4l2-image-sizes.h.
The definitions are sorted by alphabet order.
Hi Josh,
On Tue, 25 Nov 2014, Josh Wu wrote:
Reuse the v4l2 size definitions from v4l2-image-sizes.h.
So we can remove the rudundent definitions from ov2640.c.
Signed-off-by: Josh Wu josh...@atmel.com
Now this patch run-time depends on your v4l2-image-sizes.h: correct the
SVGA height
Hi Prabhakar,
Thank you for the patch.
On Wednesday 26 November 2014 23:25:44 Lad, Prabhakar wrote:
This patch drops driver specific wait_prepare() and
wait_finish() callbacks from vb2_ops and instead uses
the the helpers vb2_ops_wait_prepare/finish() provided
by the vb2 core, the lock
On 11/27/2014 09:04 PM, Michael Ira Krufky wrote:
On Thu, Nov 27, 2014 at 1:59 PM, Mauro Carvalho Chehab
mche...@osg.samsung.com wrote:
Em Thu, 27 Nov 2014 13:47:09 -0500
Michael Ira Krufky mkru...@linuxtv.org escreveu:
On Wed, Nov 26, 2014 at 10:26 AM, Mauro Carvalho Chehab
On 11/27/2014 09:42 PM, Olli Salonen wrote:
This patch adds support for new type of firmware versions of Si2168 chip.
Old type: n x 8 bytes (all data, first byte seems to be 04 or 05)
New type: n x 17 bytes (1 byte indicates len and max 16 bytes data)
New version of TechnoTrend CT2-4400
Hi Laurent,
Thank you for your comments.
On 11/28/14, 4:11 AM, Laurent Pinchart wrote:
Hi Hayama-san,
Thank you for the patch.
On Thursday 27 November 2014 10:25:01 Takanari Hayama wrote:
Source address of VSP1 RPF needs to be reset whenever crop offsets are
recalculated.
This
Hi Laurent,
On 11/28/14, 5:03 AM, Laurent Pinchart wrote:
Hi Hayama-san,
Thank you for the patch.
On Thursday 27 November 2014 10:25:02 Takanari Hayama wrote:
Regardless of a number of inputs, we should always enable virtual RPF
when BRU is used. This allows the case when there's only
Hi Guennadi,
On Sun, Nov 23, 2014 at 12:45:38PM +0100, Guennadi Liakhovetski wrote:
From: Koji Matsuoka koji.matsuoka...@renesas.com
Signed-off-by: Koji Matsuoka koji.matsuoka...@renesas.com
Signed-off-by: Yoshihiro Kaneko ykaneko0...@gmail.com
[g.liakhovet...@gmx.de: minor stylistic and
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date: Fri Nov 28 04:00:20 CET 2014
git branch: test
git hash: 504febc3f98c87a8bebd8f2f274f32c0724131e4
gcc
47 matches
Mail list logo