e in ipucsi_subdev_set_format.
> - Remove v4l2_media_subdev_prepare_stream and v4l2_media_subdev_s_stream,
>let subdevices propagate s_stream calls to their upstream subdevices
>themselves.
> - Various fixes (see individual patches for details)
For the whole series:
Tested-by:
Hi Philipp, All,
On Fri, Oct 07, 2016 at 06:01:01PM +0200, Philipp Zabel wrote:
> Add device tree nodes for the BD_HDMI_MIPI HDMI to MIPI CSI-2 receiver
> board with a TC358743 connected to the Nitrogen6X MIPI CSI-2 input
> connector.
I've tested this series on my Nitrogen6x + BD_HDMI_MIPI
Jack, All,
On Mon, Jun 20, 2016 at 10:44:44AM +0100, Jack Mitchell wrote:
>
> > I've tried that patch have a some comments:
> > - When applied, no capture shows up any more, instead I have two m2m
> > v4l2 devices [1].
> > - OV5640 Mipi is assigned the same address as OV5642, therefore both
>
Steve, Jack, All,
On Fri, Jun 17, 2016 at 12:01:41PM -0700, Steve Longerbeam wrote:
>
> On 06/17/2016 08:18 AM, Gary Bisson wrote:
> > Steve, All,
> >
> > On Thu, Jun 16, 2016 at 10:32:31AM +0200, Gary Bisson wrote:
> > > Steve, All,
> > >
> > &
Steve, All,
On Thu, Jun 16, 2016 at 10:32:31AM +0200, Gary Bisson wrote:
> Steve, All,
>
> On Tue, Jun 14, 2016 at 03:49:15PM -0700, Steve Longerbeam wrote:
> > Defines the host video capture device node and an OV5642 camera sensor
> > node on i2c2. The host capture device c
Steve, All,
On Tue, Jun 14, 2016 at 03:49:15PM -0700, Steve Longerbeam wrote:
> Defines the host video capture device node and an OV5642 camera sensor
> node on i2c2. The host capture device connects to the OV5642 via the
> parallel-bus mux input on the ipu1_csi0_mux.
>
> Note there is a pin
