Questions about dvbv5-scan (missing fields)
Hi I hope this is the right list to ask. I am looking at using dvbv5 for one of my projects. However there are some fields that I cant seem to get, in particular tsid pmt service_type (TV?Radio etc) net netid example output in VDR format CBS Drama:538000:S0B8C34D12I1M64T8G32Y0:T:27500:0:0:0:0:14640:0:0:0: Showcase TV:538000:S0B8C34D12I1M64T8G32Y0:T:27500:0:0:0:0:15296:0:0:0: Box Nation:538000:S0B8C34D12I1M64T8G32Y0:T:27500:0:0:0:0:14416:0:0:0: Horror Channel:538000:S0B8C34D12I1M64T8G32Y0:T:27500:6129:6130,6131:0:0:14480:0:0:0: 365 Travel:538000:S0B8C34D12I1M64T8G32Y0:T:27500:0:0:0:0:14784:0:0:0: Television X:538000:S0B8C34D12I1M64T8G32Y0:T:27500:0:0:0:0:15232:0:0:0: 5 USA:538000:S0B8C34D12I1M64T8G32Y0:T:27500:6689:6690,6691:0:0:12992:0:0:0: 5*:538000:S0B8C34D12I1M64T8G32Y0:T:27500:6673:6674,6675:0:0:12928:0:0:0: QUEST:538000:S0B8C34D12I1M64T8G32Y0:T:27500:6929:6930,6931:0:0:14498:0:0:0: A can be seen there is loads of zeros where entries should be thanks -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Disappearing dvb-usb stick IT9137FN (Kworld 499-2T)
Hi I have the above usb stick (dual frontend) which works fine for a while then just vanishes. ie: frontend just goes eg ls /dev/dvb (I have a permanent DVB card as well) /dev/dvb/adapter0 /dev/dvb/adapter1 /dev/dvb/adapter2 goes to ls /dev/dvb (I have a permanent DVB card as well) /dev/dvb/adapter0 To get it back I have plug/unplug several times (rebooting the box seems to make no difference) I am currently on fedora 21, but this seems to be a continual issue , through at least fedora 18 to date I cant see anything obvious in dmesg or the logs Any ideas -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: dvb-usb-it913x dissapeared kernel 3.7.2
On 21/01/2013, Mauro Carvalho Chehab wrote: > Em Mon, 21 Jan 2013 15:47:49 + > Mike Martin escreveu: > >> After updating the kernel on Fedora 18 module dvb-usb-it913x seems to >> have dissapeared. >> >> This has meant my dvb stick ( ID 1b80:e409 Afatech IT9137FN Dual DVB-T >> [KWorld UB499-2T]) no longer works >> >> Is this a Redhat only thing or is it upstream > > See this bugzilla: > https://bugzilla.redhat.com/show_bug.cgi?id=895460 > > Basically, DVB_USB_V2 wasn't selected. The kernel-3.7.2-204.fc18 should > fix this issue. > >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-media" in >> the body of a message to majord...@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > > -- > > Cheers, > Mauro > Seems to be fixed now -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
dvb-usb-it913x dissapeared kernel 3.7.2
After updating the kernel on Fedora 18 module dvb-usb-it913x seems to have dissapeared. This has meant my dvb stick ( ID 1b80:e409 Afatech IT9137FN Dual DVB-T [KWorld UB499-2T]) no longer works Is this a Redhat only thing or is it upstream -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
DVB - attach to an open frontend device
Not too sure if this is possible but what I want to do is this open frontend set frequency add demux filters etc record then while this is running I want to attach to the same process and add further demux filters (without retuning - same frequency) any tips? -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Accessing running dvb device
Hi I am trying to run multiple recordings on my dvb device (rtl2832). However when I try to access the frontend settings when a recording is active get_frontend returns nothing. This is using the Linux::DVB::DVBT module any suggestions -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
rtl2832u usb dvb id 1b80:d395
hi Still have one or two probs I have tried both anttis and jan trees, both of them compile but do not load modules or create dvb device when modprobed Using the realtek driver (1.4.2) I have the following issue one (and now only one) mux fails to pick up any channels, the channels are as clear as day my digibox with the same same connection >>> tune to: >>> 530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: >>> tuning failed!!! The only difference I can see is this in dvbtune mux that works dvbtune -f 482167000 Using DVB card "Realtek RTL2832 DVB-T RTL2836 DTMB" tuning DVB-T (in United Kingdom) to 482167000 Hz polling Getting frontend event FE_STATUS: polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC Event: Frequency: 492767000 SymbolRate: 0 FEC_inner: 2 Bit error rate: 206 Signal strength: 14135 SNR: 19 FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC failing mux dvbtune -f 530167000 Using DVB card "Realtek RTL2832 DVB-T RTL2836 DTMB" tuning DVB-T (in United Kingdom) to 530167000 Hz polling Getting frontend event FE_STATUS: polling polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC Event: Frequency: 540767000 SymbolRate: 0 FEC_inner: 2 Bit error rate: 19616 Signal strength: 14135 SNR: 16 FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC The only difference I can see is the SNR and ber (19616) any ideas -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
rtl2832u usb dvb id 1b80:d395
hi Still have one or two probs I have tried both anttis and jan trees, both of them compile but do not load modules or create dvb device when modprobed Using the realtek driver (1.4.2) I have the following issue one (and now only one) mux fails to pick up any channels, the channels are as clear as day my digibox with the same same connection >>> tune to: >>> 530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE WARNING: >>> tuning failed!!! The only difference I can see is this in dvbtune mux that works dvbtune -f 482167000 Using DVB card "Realtek RTL2832 DVB-T RTL2836 DTMB" tuning DVB-T (in United Kingdom) to 482167000 Hz polling Getting frontend event FE_STATUS: polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC Event: Frequency: 492767000 SymbolRate: 0 FEC_inner: 2 Bit error rate: 206 Signal strength: 14135 SNR: 19 FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC failing mux dvbtune -f 530167000 Using DVB card "Realtek RTL2832 DVB-T RTL2836 DTMB" tuning DVB-T (in United Kingdom) to 530167000 Hz polling Getting frontend event FE_STATUS: polling polling Getting frontend event FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC Event: Frequency: 540767000 SymbolRate: 0 FEC_inner: 2 Bit error rate: 19616 Signal strength: 14135 SNR: 16 FE_STATUS: FE_HAS_SIGNAL FE_HAS_LOCK FE_HAS_CARRIER FE_HAS_VITERBI FE_HAS_SYNC The only difference I can see is the SNR and ber (19616) any ideas -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Problems with using dvb_usb_rtl2832u
On 27 November 2010 17:05, Mike Martin wrote: > On 27 November 2010 16:33, Anca Emanuel wrote: >> On Sat, Nov 27, 2010 at 6:14 PM, Mike Martin wrote: >>> Hi >>> >>> I am using this driver with USB 1b80:s395 >> >> It's not possible to be s395, please send what "lsusb" prints. >> And if you have other info, like the product info, etc. >> > > sorry typo 1b80:d395 > further info Dvbstreamer works but very few other dvb* utilities - confused now -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Problems with using dvb_usb_rtl2832u
On 27 November 2010 16:33, Anca Emanuel wrote: > On Sat, Nov 27, 2010 at 6:14 PM, Mike Martin wrote: >> Hi >> >> I am using this driver with USB 1b80:s395 > > It's not possible to be s395, please send what "lsusb" prints. > And if you have other info, like the product info, etc. > sorry typo 1b80:d395 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Problems with using dvb_usb_rtl2832u
Hi I am using this driver with USB 1b80:s395 Modules load scandvb gets channels /dev/dvb gets created dvbtune seems to tune to transponder however none of the other dvb utilities seem to work ie: dvbdate dvbsnoop (except forfeinfo) dvbtraffic dvbstream example dvbsnoop -s feinfo dvbsnoop V1.4.50 -- http://dvbsnoop.sourceforge.net/ - FrontEnd Info... - Device: /dev/dvb/adapter0/frontend0 Basic capabilities: Name: "Realtek RTL2832 DVB-T RTL2836 DTMB" Frontend-type: OFDM (DVB-T) Frequency (min): 174000.000 kHz Frequency (max): 862000.000 kHz Frequency stepsiz: 166.667 kHz Frequency tolerance: 0.000 kHz Symbol rate (min): 0.00 MSym/s Symbol rate (max): 0.00 MSym/s Symbol rate tolerance: 0 ppm Notifier delay: 0 ms Frontend capabilities: auto inversion FEC 1/2 FEC 2/3 FEC 3/4 FEC 5/6 FEC 7/8 FEC AUTO QPSK QAM 16 QAM 64 QAM AUTO auto transmission mode auto guard interval auto hierarchy Current parameters: Frequency: 497833.000 kHz Inversion: OFF Bandwidth: 8 MHz Stream code rate (hi prio): FEC 2/3 Stream code rate (lo prio): FEC AUTO Modulation: QAM 64 Transmission mode: 2k mode Guard interval: 1/32 Hierarchy: none dvbdate . dvbdate: timeout - try tuning to a multiplex? dvbdate: Unable to get time from multiplex. any ideas? -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Problems with using dvb_usb_rtl2832u
Hi I am using this driver with USB 1b80:s395 Modules load scandvb gets channels /dev/dvb gets created dvbtune seems to tune to transponder however none of the other dvb utilities seem to work ie: dvbdate dvbsnoop (except forfeinfo) dvbtraffic dvbstream example dvbsnoop -s feinfo dvbsnoop V1.4.50 -- http://dvbsnoop.sourceforge.net/ - FrontEnd Info... - Device: /dev/dvb/adapter0/frontend0 Basic capabilities: Name: "Realtek RTL2832 DVB-T RTL2836 DTMB" Frontend-type: OFDM (DVB-T) Frequency (min): 174000.000 kHz Frequency (max): 862000.000 kHz Frequency stepsiz: 166.667 kHz Frequency tolerance: 0.000 kHz Symbol rate (min): 0.00 MSym/s Symbol rate (max): 0.00 MSym/s Symbol rate tolerance: 0 ppm Notifier delay: 0 ms Frontend capabilities: auto inversion FEC 1/2 FEC 2/3 FEC 3/4 FEC 5/6 FEC 7/8 FEC AUTO QPSK QAM 16 QAM 64 QAM AUTO auto transmission mode auto guard interval auto hierarchy Current parameters: Frequency: 497833.000 kHz Inversion: OFF Bandwidth: 8 MHz Stream code rate (hi prio): FEC 2/3 Stream code rate (lo prio): FEC AUTO Modulation: QAM 64 Transmission mode: 2k mode Guard interval: 1/32 Hierarchy: none dvbdate . dvbdate: timeout - try tuning to a multiplex? dvbdate: Unable to get time from multiplex. any ideas? -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: Problem with Compro T200 (TDA1004x) and tuning Hi
On 22 November 2010 06:08, hermann pitton wrote: > Hi Mike, > > Am Sonntag, den 21.11.2010, 17:58 + schrieb Mike Martin: >> I am trying to tune channels with this card (which seems to be >> installed OK). However the output is >> >> Using DVB card "Philips TDA10046H DVB-T" >> tuning DVB-T (in United Kingdom) to 497833000 Hz >> polling >> Getting frontend event >> FE_STATUS: >> polling >> polling >> polling >> > > usually, in the UK, this can be caused by the missing ability to detect > some frequencies offsets by the tda10046. > > Since you have already a minus of 167000Hz, typically for the UK, in > your initial scan/tuning file, this most common problem likely can be > excluded. > > So there are eventually three variants causing the problem on a first > idea. > > 1. They changed to 498 MHz. (or did change something else too, "auto" > is your friend in the initial scan file then, except for the freq.) > tried that no difference > 2. Your overall signal is not good enough. > well up until friday I was using a HVR900, until it decided to refuse to believe it was plugged into a USB2 bus, and it was working fine > 3. You sit on some kernel with some bug. > > Case one and two are not hard to come through, for case three, the > remedies are slipping away. > > You might have to install some latest .rc-git stuff, likely without > support for your graphics card, coming up in vesa mode only, try to > record something, and boot back into some kernel with support for > displaying the record, we all have HDTV these days ... > > It might look like that, since the mobile devices and webcams took it > all over here ;) > > Cheers, > Hermann > > > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Problem with Compro T200 (TDA1004x) and tuning Hi
I am trying to tune channels with this card (which seems to be installed OK). However the output is Using DVB card "Philips TDA10046H DVB-T" tuning DVB-T (in United Kingdom) to 497833000 Hz polling Getting frontend event FE_STATUS: polling polling polling etc,etc -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Problem with HVR 900 (B2C0) and USB detection
Hi I have been using this device for years using Markuses Driver. Now for some bizarre reason using both this driver and devins the wrong USB driver is being used (ohci rather than ehci), which means it is recognised as a USB 1.1 device, which makes it stop working Anyone know if there is any way to force it to use USB 2 Other usb devices use the correct usb speed thanks -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Scan-file for uk-Aberdare
Attached is a working scan file for uk-Aberdare post switchover uk-Aberdare_dso Description: Binary data
Scan not getting Channel names after DSO
Hi on one (and only one I think) multiplex after digital switchover I am getting the following [6440]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:101:102:25664 [6480]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:201:202:25728 [64c0]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:301:302:25792 [6500]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:25856 [6540]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:501:502:25920 [6b00]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:2101:2102:27392 [6b40]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:27456 [6b80]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:27520 [6bc0]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:27584 [6c00]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:27648 [6c40]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:27712 [6c80]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:27776 [6cc0]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:2311:2312:27840 [6d00]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:27904 [6d80]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:601:602:28032 [6980]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GDone. UARD_INTERVAL_1_32:HIERARCHY_NONE:0:0:27008 [6840]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:1901:26688 [6800]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:1809:26624 [67c0]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:1701:26560 [66c0]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:1301:26304 [6680]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:1201:26240 [6640]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:1101:26176 [6700]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:0:1401:26368 [6a00]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:701:702:27136 As you can see instead of the Channel name I am getting what looks to be hex - any idea why, this is on 530167000 frequency (channel 28+) example being this item [6d80]:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:601:602:28032 should be ITV4:530167000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:601:602:28032 any ideas -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
