Franklin Meng wrote:
Devin,
I'm actually not really concerned about it's
interaction
with a demod.
I'm more worried about other products that have
saa711[345] that use
a bridge other than em28xx. The introduction of
power
management
could always expose bugs in those bridges (I had
On Sun, Jan 17, 2010 at 2:05 AM, Franklin Meng fmeng2...@yahoo.com wrote:
I retested my device and tried several different GPIO sequences but so far
every time I change between the Analog and digital interface, the SAA7113
needs to be reinitialized. I tried leaving both the digital and
OK.. I guess that was a misunderstanding on my part. I will split up the patch
and re submit.
Thanks,
Franklin
--- On Sun, 1/17/10, Devin Heitmueller dheitmuel...@kernellabs.com wrote:
From: Devin Heitmueller dheitmuel...@kernellabs.com
Subject: Re: Kworld 315U and SAA7113?
To: Franklin
Devin,
I'm actually not really concerned about it's
interaction
with a demod.
I'm more worried about other products that have
saa711[345] that use
a bridge other than em28xx. The introduction of
power
management
could always expose bugs in those bridges (I had this
problem in
Mario,
Thank you for taking a look at this.. I'll resubmit the patches.
Thanks,
Franklin Meng
--- On Wed, 1/13/10, Mauro Carvalho Chehab mche...@redhat.com wrote:
From: Mauro Carvalho Chehab mche...@redhat.com
Subject: Re: Kworld 315U and SAA7113?
To: Franklin Meng fmeng2...@yahoo.com
Devin,
This is pretty good stuff. A few questions/comments
about your patch:
The code has different GPIO configurations for the two
analog modes.
This is a bit unusual for an em28xx design. Do you
know what the
difference is in terms of what GPIO7 controls?
Unfortunately, I do not
On Thu, Jan 14, 2010 at 1:54 PM, Franklin Meng fmeng2...@yahoo.com wrote:
Unfortunately, I do not know the difference. I thought it might be to do
something to the tuner but I am not quite sure. If I remember correctly, the
traces that I obtained also showed a difference between the analog
Franklin Meng wrote:
As far as I can tell, the Kworld 315U is the only board that uses this
combination of parts.. Thomson tuner, LG demod, and SAA7113. I don't think
any other device has used the SAA7113 together with a digital demod. Most
products seem to only have the SAA711X on an
On Thu, Jan 14, 2010 at 5:00 PM, CityK ci...@rogers.com wrote:
Franklin Meng wrote:
As far as I can tell, the Kworld 315U is the only board that uses this
combination of parts.. Thomson tuner, LG demod, and SAA7113. I don't think
any other device has used the SAA7113 together with a
: Kworld 315U and SAA7113?
To: CityK ci...@rogers.com
Cc: Franklin Meng fmeng2...@yahoo.com, linux-media@vger.kernel.org
Date: Thursday, January 14, 2010, 2:09 PM
On Thu, Jan 14, 2010 at 5:00 PM,
CityK ci...@rogers.com
wrote:
Franklin Meng wrote:
As far as I can tell, the Kworld 315U
Hi Franklin,
I have no Kworld 315U here for testing, but your patch looked sane on my eyes.
In order to merge this upstream, it would be better if you could submit it as
two
separate patches: the first one with the saa7115 changes to support
re-energizing
the device, and the second one with the
On Sat, Jan 9, 2010 at 2:30 PM, Franklin Meng fmeng2...@yahoo.com wrote:
I tweaked the GPIO's a bit more for the Kworld 315U and switching between
analog and digital signals is more reliable now. Attached is an updated diff.
Hello Franklin,
This is pretty good stuff. A few
Attached is an updated diff for the Kworld 315U TV. I believe all the bugs
have been worked out. I haven't figured out the remote control stuff and
hopefully I will be able to get around to it some time.
The sound issue was because I didn't have the right mplayer config so that is
fixed as
I tweaked the GPIO's a bit more for the Kworld 315U and switching between
analog and digital signals is more reliable now. Attached is an updated diff.
diff -r b6b82258cf5e linux/drivers/media/video/em28xx/em28xx-cards.c
--- a/linux/drivers/media/video/em28xx/em28xx-cards.c Thu Dec 31
14 matches
Mail list logo