Hi Aguirre Sergio,
1) Looks like it could be a data lane issue. OMAP detects lots of
ERRSOTSYNCHS errors
on the datalanes (CSI2_COMPLEXIO_IRQSTATUS)
2) Even if i configure it to use only one data lane on both sides. It detects
errors on other data lanes.
That explains the
Sriram,
On Sun, Feb 26, 2012 at 8:54 AM, Sriram V vshrir...@gmail.com wrote:
Hi,
When I take the dump of the buffer which is pointed by DATA MEM
PING ADDRESS. It always shows 0x55.
Even if i write 0x00 to the address. I do notice that it quickly
changes to 0x55.
Under what conditions
Hi,
When I take the dump of the buffer which is pointed by DATA MEM
PING ADDRESS. It always shows 0x55.
Even if i write 0x00 to the address. I do notice that it quickly
changes to 0x55.
Under what conditions could this happen? What am i missing here.
I do notice that the OMAP4 ISS is
Hi,
1) I am trying to get a HDMI to CSI Bridge chip working with OMAP4 ISS.
The issue is the captured frames are completely green in color.
2) The Chip is configured to output VGA Color bar sequence with
YUV422-8Bit and
uses datalane 0 only.
3) The Format on OMAP4 ISS is UYVY
Hi Sriram,
On Thu, Feb 23, 2012 at 11:25 AM, Sriram V vshrir...@gmail.com wrote:
Hi,
1) I am trying to get a HDMI to CSI Bridge chip working with OMAP4 ISS.
The issue is the captured frames are completely green in color.
Sounds like the buffer is all zeroes, can you confirm?
2) The
Hi,
1) An Hexdump of the captured file shows 0x55 at all locations.
Is there any buffer location i need to check.
2) I have tried with devel branch.
3) Changing the polarities doesnt help either.
4) The sensor is giving out YUV422 8Bit Mode,
Will 0x52001074 = 0x0A1E (UYVY