Hi,
I opened de device and it is definitely an EC168 and a MXL5003s, also to
my surprise on the chipset it is written DUTV007 instead of DUTV002,
which was the model number that was written in the package.
However when scanning I get errors and only finds about a third of
available services at
Tanguy PRUVOT wrote:
There is a Linux EC168 (with MxL) driver available Where can i find
it ?
http://linuxtv.org/hg/~anttip/ec168/
Antti
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a message to majord...@vger.kernel.org
More majordomo info at
Hi,
I found that my card isn't locking on certain frequencies,Could it be a
problem of signal strength? In widows it gets all channels though.
Here is the log:
[41630.298168] ec100_init
[41630.299611] 40 21 ff 00 c6 01 01 00 00
[41630.301225] 40 21 09 00 c6 01 02 00 b1 fe
[41630.302605] 40
moi,
t.Hgch wrote:
I also followed this post to get streams from the EC168:
https://www.dealextreme.com/forums/Default.dx/sku.8325~threadid.278942
However my card is a MinTv usb 2.0 dvb-t DUTV002, which seems to be
using a MT2060 tuner. Some channels where partially received. Let me
Partially
Hi,
Partially received? If there is really MT2060 tuner then channels should
not be received at all.
I checked again and i am getting a couple of dtv channels and some more
radio channels, and they display/sound pretty well.
I'm sure that the card model is the one I previously mentioned,
t.Hgch wrote:
Partially received? If there is really MT2060 tuner then channels should
not be received at all.
I checked again and i am getting a couple of dtv channels and some more
radio channels, and they display/sound pretty well.
Then the tuner must be MXL5003S because it is only
Tanguy,
are you still hacking with device? Or is there anyone else who is?
I have done some work but not very much. Basically it now loads firmware
and and have some basic demod and tuner stuff. I have now one one
problem that I have no idea why. After firmware download device
reconnects
Antti Palosaari wrote:
I have done some work but not very much. Basically it now loads firmware
and and have some basic demod and tuner stuff. I have now one one
problem that I have no idea why. After firmware download device
reconnects (upon request as seen from sniff) with vendor and product
Tanguy Pruvot wrote:
#define CMD_EC168_RAM 0x00 //RW- Read/Write RAM (Firmware go to addr
0-0x1EFF)
#define CMD_EC168_GETSTATUS 0x01 //R-- ex:
dfu_ctrl_get(device,0x01,0x,0x01A0,buffer,0x1A);
#define CMD_EC168_STREAM0x03 //R-X ex: dfu_ctrl(device,0x03,0/0x20,0xFF00);
Peter Nemeik wrote:
Hallo,
I am looking for Firmware Drivers for the LogiLink VG0002 USB2.0 DVB-T
Stick.
There is a Tuner Chip Maxlinear MXL 5003S and
a Chip from EC168 (EC168.com) XCMK27819X.
I had the Information from the LogiLink Hotline.
MXL5003 is supported but EC168 is not. There is
10 matches
Mail list logo
