Re: IMX6 Media dev node not created
Hi Ibtsam, On Thu, Apr 5, 2018 at 11:52 AM, Ibtsam Ul-Haqwrote: > That worked like a charm! Thanks a lot guys, I would have never thought of > that! Excellent! If you have a chance, please submit the the dts patch that enables the camera to the linux-arm-kernel mailing list for review and inclusion to the mainline kernel.
Re: IMX6 Media dev node not created
On Thu, Apr 5, 2018 at 4:36 PM, Philipp Zabelwrote: > Hi Ibtsam, > > On Thu, 2018-04-05 at 16:24 +0200, Ibtsam Ul-Haq wrote: >> Hi Fabio, >> >> Thanks for your reply. >> >> On Thu, Apr 5, 2018 at 3:31 PM, Fabio Estevam wrote: >> > Hi Ibtsam, >> > >> > [Adding Steve and Philipp in case they can provide some suggestions] >> > >> > On Thu, Apr 5, 2018 at 9:30 AM, Ibtsam Ul-Haq >> > wrote: >> > > Greetings everyone, >> > > >> > > I'm running Linux 4.14.31 on an IMX6 QuadPlus based Phytec board >> > > (PCM-058). I have connected an mt9p031 sensor to ipu1_csi0. The >> > > problem is that I am not seeing the /dev/media0 node. >> > >> > Can you share your dts? >> > >> >> Certainly. The dts provided by the board manufacturer was meant to >> work with their own kernel, I tried to modify it to work with the >> mainline kernel. >> >> The sensor related nodes are: >> > [...] >> mt9p031_1: cam1@5d { >> compatible = "aptina,mt9p031"; >> reg = <0x5d>; >> status = "okay"; > [...] >> I intend to use two cameras simultaneously. In my current setup >> however only one camera is physically connected. > > Try disabling this camera as long as it is not present, otherwise the > imx-media driver will wait forever for it to appear before creating > /dev/media0. > That worked like a charm! Thanks a lot guys, I would have never thought of that! > regards > Philipp Best regards, Ibtsam Haq
Re: IMX6 Media dev node not created
Hi Ibtsam, On Thu, 2018-04-05 at 16:24 +0200, Ibtsam Ul-Haq wrote: > Hi Fabio, > > Thanks for your reply. > > On Thu, Apr 5, 2018 at 3:31 PM, Fabio Estevamwrote: > > Hi Ibtsam, > > > > [Adding Steve and Philipp in case they can provide some suggestions] > > > > On Thu, Apr 5, 2018 at 9:30 AM, Ibtsam Ul-Haq > > wrote: > > > Greetings everyone, > > > > > > I'm running Linux 4.14.31 on an IMX6 QuadPlus based Phytec board > > > (PCM-058). I have connected an mt9p031 sensor to ipu1_csi0. The > > > problem is that I am not seeing the /dev/media0 node. > > > > Can you share your dts? > > > > Certainly. The dts provided by the board manufacturer was meant to > work with their own kernel, I tried to modify it to work with the > mainline kernel. > > The sensor related nodes are: > [...] > mt9p031_1: cam1@5d { > compatible = "aptina,mt9p031"; > reg = <0x5d>; > status = "okay"; [...] > I intend to use two cameras simultaneously. In my current setup > however only one camera is physically connected. Try disabling this camera as long as it is not present, otherwise the imx-media driver will wait forever for it to appear before creating /dev/media0. regards Philipp
Re: IMX6 Media dev node not created
Hi Fabio, Thanks for your reply. On Thu, Apr 5, 2018 at 3:31 PM, Fabio Estevamwrote: > Hi Ibtsam, > > [Adding Steve and Philipp in case they can provide some suggestions] > > On Thu, Apr 5, 2018 at 9:30 AM, Ibtsam Ul-Haq > wrote: >> Greetings everyone, >> >> I'm running Linux 4.14.31 on an IMX6 QuadPlus based Phytec board >> (PCM-058). I have connected an mt9p031 sensor to ipu1_csi0. The >> problem is that I am not seeing the /dev/media0 node. > > Can you share your dts? > Certainly. The dts provided by the board manufacturer was meant to work with their own kernel, I tried to modify it to work with the mainline kernel. The sensor related nodes are: { pinctrl-names = "default"; pinctrl-0 = <_i2c1>; clock-frequency = <10>; status = "okay"; mt9p031_0: cam0@48 { compatible = "aptina,mt9p031"; reg = <0x48>; status = "okay"; vdd-supply = <_cam2v8>; vdd_io-supply = <_cam2v8>; vaa-supply = <_cam2v8>; clocks = <_camclk>; port { mt9p031_ep0: endpoint { input-clock-frequency = <2700>; pixel-clock-frequency = <5400>; pclk-sample = <1>; remote-endpoint = <_csi0_mux_from_parallel_sensor>; }; }; }; mt9p031_1: cam1@5d { compatible = "aptina,mt9p031"; reg = <0x5d>; status = "okay"; vdd-supply = <_cam2v8>; vdd_io-supply = <_cam2v8>; vaa-supply = <_cam2v8>; clocks = <_camclk>; port { mt9p031_ep1: endpoint { input-clock-frequency = <2700>; pixel-clock-frequency = <5400>; bus-width = <12>; pclk-sample = <1>; remote-endpoint = <_csi1_mux_from_parallel_sensor>; }; }; }; }; And the IPU related stuff: _csi0_from_ipu1_csi0_mux { bus-width = <8>; data-shift = <12>; /* Lines 19:12 used */ hsync-active = <1>; vsync-active = <1>; }; _csi0_mux_from_parallel_sensor { remote-endpoint = <_ep0>; }; _csi0 { pinctrl-names = "default"; pinctrl-0 = < _sensor_cam0_data _sensor_cam0_ctrl >; }; _csi1_from_ipu2_csi1_mux { bus-width = <8>; data-shift = <12>; /* Lines 19:12 used */ hsync-active = <1>; vsync-active = <1>; }; _csi1_mux_from_parallel_sensor { remote-endpoint = <_ep1>; }; _csi1 { pinctrl-names = "default"; pinctrl-0 = < _sensor_cam1_data _sensor_cam1_ctrl >; }; >> I have already read the fix mentioned in a previous discussion: >> >> https://www.spinics.net/lists/linux-media/msg121965.html >> >> and that does not seem to be the problem in my case as I do get the >> "ipu1_csi0_mux" registered. Running a grep on dmesg I get: >> >> [3.235383] imx-media: Registered subdev ipu1_vdic >> [3.241134] imx-media: Registered subdev ipu2_vdic >> [3.246830] imx-media: Registered subdev ipu1_ic_prp >> [3.252115] imx-media: Registered subdev ipu1_ic_prpenc >> [3.266991] imx-media: Registered subdev ipu1_ic_prpvf >> [3.280228] imx-media: Registered subdev ipu2_ic_prp >> [3.285580] imx-media: Registered subdev ipu2_ic_prpenc >> [3.299335] imx-media: Registered subdev ipu2_ic_prpvf >> [3.350034] imx-media: Registered subdev ipu1_csi0 >> [3.363017] imx-media: Registered subdev ipu1_csi1 >> [3.375523] imx-media: Registered subdev ipu2_csi0 >> [3.388615] imx-media: Registered subdev ipu2_csi1 >> [3.560351] imx-media: Registered subdev ipu1_csi0_mux >> [3.566151] imx-media: Registered subdev ipu2_csi1_mux >> [ 10.525497] imx-media: Registered subdev mt9p031 0-0048 >> [ 10.530816] imx-media capture-subsystem: Entity type for entity >> mt9p031 0-0048 was not initialized! >> [ 10.569201] mt9p031 0-0048: MT9P031 detected at address 0x48 >> [ 10.582895] imx-media: Registered subdev mt9p031 0-005d >> [ 10.588335] imx-media capture-subsystem: Entity type for entity >> mt9p031 0-005d was not initialized! >> [ 10.618795] mt9p031 0-005d: MT9P031 not detected, wrong version 0xfffa > > Why do you have the camera in two I2C addresses: 0x48 and 0x5d? > I intend to use two cameras simultaneously. In my current setup however only one camera is physically connected. >> Also my config does appear to have the required options activated; >> running "zcat /proc/config.gz | egrep 'VIDEO_MUX|MUX_MMIO|VIDEO_IMX'" >> I get: >> >> # CONFIG_MDIO_BUS_MUX_MMIOREG is not set >> CONFIG_VIDEO_MUX=y >> CONFIG_VIDEO_IMX_VDOA=m >> CONFIG_VIDEO_IMX_MEDIA=y >> CONFIG_VIDEO_IMX_CSI=y >> CONFIG_MUX_MMIO=y >> >> I would really appreciate if anyone could help me trying to find out >> what went wrong and why the /dev/media0 node is not showing up. >> >> Many thanks and best regards, >> Ibtsam Haq
Re: IMX6 Media dev node not created
Hi Ibtsam, [Adding Steve and Philipp in case they can provide some suggestions] On Thu, Apr 5, 2018 at 9:30 AM, Ibtsam Ul-Haqwrote: > Greetings everyone, > > I'm running Linux 4.14.31 on an IMX6 QuadPlus based Phytec board > (PCM-058). I have connected an mt9p031 sensor to ipu1_csi0. The > problem is that I am not seeing the /dev/media0 node. Can you share your dts? > I have already read the fix mentioned in a previous discussion: > > https://www.spinics.net/lists/linux-media/msg121965.html > > and that does not seem to be the problem in my case as I do get the > "ipu1_csi0_mux" registered. Running a grep on dmesg I get: > > [3.235383] imx-media: Registered subdev ipu1_vdic > [3.241134] imx-media: Registered subdev ipu2_vdic > [3.246830] imx-media: Registered subdev ipu1_ic_prp > [3.252115] imx-media: Registered subdev ipu1_ic_prpenc > [3.266991] imx-media: Registered subdev ipu1_ic_prpvf > [3.280228] imx-media: Registered subdev ipu2_ic_prp > [3.285580] imx-media: Registered subdev ipu2_ic_prpenc > [3.299335] imx-media: Registered subdev ipu2_ic_prpvf > [3.350034] imx-media: Registered subdev ipu1_csi0 > [3.363017] imx-media: Registered subdev ipu1_csi1 > [3.375523] imx-media: Registered subdev ipu2_csi0 > [3.388615] imx-media: Registered subdev ipu2_csi1 > [3.560351] imx-media: Registered subdev ipu1_csi0_mux > [3.566151] imx-media: Registered subdev ipu2_csi1_mux > [ 10.525497] imx-media: Registered subdev mt9p031 0-0048 > [ 10.530816] imx-media capture-subsystem: Entity type for entity > mt9p031 0-0048 was not initialized! > [ 10.569201] mt9p031 0-0048: MT9P031 detected at address 0x48 > [ 10.582895] imx-media: Registered subdev mt9p031 0-005d > [ 10.588335] imx-media capture-subsystem: Entity type for entity > mt9p031 0-005d was not initialized! > [ 10.618795] mt9p031 0-005d: MT9P031 not detected, wrong version 0xfffa Why do you have the camera in two I2C addresses: 0x48 and 0x5d? > Also my config does appear to have the required options activated; > running "zcat /proc/config.gz | egrep 'VIDEO_MUX|MUX_MMIO|VIDEO_IMX'" > I get: > > # CONFIG_MDIO_BUS_MUX_MMIOREG is not set > CONFIG_VIDEO_MUX=y > CONFIG_VIDEO_IMX_VDOA=m > CONFIG_VIDEO_IMX_MEDIA=y > CONFIG_VIDEO_IMX_CSI=y > CONFIG_MUX_MMIO=y > > I would really appreciate if anyone could help me trying to find out > what went wrong and why the /dev/media0 node is not showing up. > > Many thanks and best regards, > Ibtsam Haq
IMX6 Media dev node not created
Greetings everyone, I'm running Linux 4.14.31 on an IMX6 QuadPlus based Phytec board (PCM-058). I have connected an mt9p031 sensor to ipu1_csi0. The problem is that I am not seeing the /dev/media0 node. I have already read the fix mentioned in a previous discussion: https://www.spinics.net/lists/linux-media/msg121965.html and that does not seem to be the problem in my case as I do get the "ipu1_csi0_mux" registered. Running a grep on dmesg I get: [3.235383] imx-media: Registered subdev ipu1_vdic [3.241134] imx-media: Registered subdev ipu2_vdic [3.246830] imx-media: Registered subdev ipu1_ic_prp [3.252115] imx-media: Registered subdev ipu1_ic_prpenc [3.266991] imx-media: Registered subdev ipu1_ic_prpvf [3.280228] imx-media: Registered subdev ipu2_ic_prp [3.285580] imx-media: Registered subdev ipu2_ic_prpenc [3.299335] imx-media: Registered subdev ipu2_ic_prpvf [3.350034] imx-media: Registered subdev ipu1_csi0 [3.363017] imx-media: Registered subdev ipu1_csi1 [3.375523] imx-media: Registered subdev ipu2_csi0 [3.388615] imx-media: Registered subdev ipu2_csi1 [3.560351] imx-media: Registered subdev ipu1_csi0_mux [3.566151] imx-media: Registered subdev ipu2_csi1_mux [ 10.525497] imx-media: Registered subdev mt9p031 0-0048 [ 10.530816] imx-media capture-subsystem: Entity type for entity mt9p031 0-0048 was not initialized! [ 10.569201] mt9p031 0-0048: MT9P031 detected at address 0x48 [ 10.582895] imx-media: Registered subdev mt9p031 0-005d [ 10.588335] imx-media capture-subsystem: Entity type for entity mt9p031 0-005d was not initialized! [ 10.618795] mt9p031 0-005d: MT9P031 not detected, wrong version 0xfffa Also my config does appear to have the required options activated; running "zcat /proc/config.gz | egrep 'VIDEO_MUX|MUX_MMIO|VIDEO_IMX'" I get: # CONFIG_MDIO_BUS_MUX_MMIOREG is not set CONFIG_VIDEO_MUX=y CONFIG_VIDEO_IMX_VDOA=m CONFIG_VIDEO_IMX_MEDIA=y CONFIG_VIDEO_IMX_CSI=y CONFIG_MUX_MMIO=y I would really appreciate if anyone could help me trying to find out what went wrong and why the /dev/media0 node is not showing up. Many thanks and best regards, Ibtsam Haq