On 16:50 Fri 13 Mar 2009, Alan Stern wrote:
> On Fri, 13 Mar 2009, Brandon Philips wrote:
>
> > On 14:03 Fri 13 Mar 2009, Alan Stern wrote:
> > > On Fri, 13 Mar 2009, Brandon Philips wrote:
> > >
> > > > > Okay, not much information there but it's a start. Here's a more
> > > > > informative pa
On Fri, 13 Mar 2009, Brandon Philips wrote:
> On 14:03 Fri 13 Mar 2009, Alan Stern wrote:
> > On Fri, 13 Mar 2009, Brandon Philips wrote:
> >
> > > > Okay, not much information there but it's a start. Here's a more
> > > > informative patch to try instead.
> > >
> > > Here is the log:
> > > h
On 14:03 Fri 13 Mar 2009, Alan Stern wrote:
> On Fri, 13 Mar 2009, Brandon Philips wrote:
>
> > > Okay, not much information there but it's a start. Here's a more
> > > informative patch to try instead.
> >
> > Here is the log:
> > http://ifup.org/~philips/467317/pearl-alan-debug-2.log
>
> I
On Fri, 13 Mar 2009, Brandon Philips wrote:
> > Okay, not much information there but it's a start. Here's a more
> > informative patch to try instead.
>
> Here is the log:
> http://ifup.org/~philips/467317/pearl-alan-debug-2.log
I still can't tell what's happening. Here's yet another patch.
On 10:35 Fri 13 Mar 2009, Alan Stern wrote:
> On Wed, 11 Mar 2009, Brandon Philips wrote:
>
> > On 15:46 Wed 11 Mar 2009, Alan Stern wrote:
> > > On Wed, 11 Mar 2009, Brandon Philips wrote:
> > > Okay, here's a diagnostic patch meant to apply on top of
> > > gregkh-all-2.6.29-rc7. Let's see what
On Wed, 11 Mar 2009, Brandon Philips wrote:
> On 15:46 Wed 11 Mar 2009, Alan Stern wrote:
> > On Wed, 11 Mar 2009, Brandon Philips wrote:
> > Okay, here's a diagnostic patch meant to apply on top of
> > gregkh-all-2.6.29-rc7. Let's see what it says...
>
> Here is the log:
> http://ifup.org/~ph
On 15:46 Wed 11 Mar 2009, Alan Stern wrote:
> On Wed, 11 Mar 2009, Brandon Philips wrote:
> Okay, here's a diagnostic patch meant to apply on top of
> gregkh-all-2.6.29-rc7. Let's see what it says...
Here is the log:
http://ifup.org/~philips/467317/pearl-alan-debug.log
> default:
>
On Wed, 11 Mar 2009, Brandon Philips wrote:
> It still locks up with "Unlink after no-IRQ" with -rc7 + greg's patches
> and test in /sys/power/disk.
>
> One of the times when I booted up this new Kernel I got some errors out
> of ehci_hcd/khubd: http://ifup.org/~philips/467317/khubd.timeout It on
On 11:30 Wed 11 Mar 2009, Alan Stern wrote:
> On Tue, 10 Mar 2009, Brandon Philips wrote:
> > First observation: I can't reproduce this bug with console=ttyS0,115200
> > console=tty0. Everything works great actually. Is writing to the serial
> > port causing just enough delay to hide the bug?
>
>
On Tue, 10 Mar 2009, Brandon Philips wrote:
> First observation: I can't reproduce this bug with console=ttyS0,115200
> console=tty0. Everything works great actually. Is writing to the serial
> port causing just enough delay to hide the bug?
Maybe it is, maybe it isn't. There's no way to know at
On 12:43 Sun 08 Mar 2009, Alan Stern wrote:
> On Sat, 7 Mar 2009, Brandon Philips wrote:
> > > Have you tried suspending just the two devices plugged into that EHCI
> > > controller instead of suspending the entire system? That would make it
> > > a lot easier to carry out testing.
> >
> > I tr
On Sat, 7 Mar 2009, Brandon Philips wrote:
> > Have you tried suspending just the two devices plugged into that EHCI
> > controller instead of suspending the entire system? That would make it
> > a lot easier to carry out testing.
>
> I tried to reproduce with s2ram suspend, echo suspend >
> /
On 12:37 Sat 07 Mar 2009, Alan Stern wrote:
> On Sat, 7 Mar 2009, Brandon Philips wrote:
> > On 21:26 Fri 06 Mar 2009, Greg KH wrote:
> > > On Fri, Mar 06, 2009 at 11:11:22AM -0800, Brandon Philips wrote:
> > > > When an UVC device is open and a S4 is attempted the thaw hangs (see the
> > > > stack
On Fri, 6 Mar 2009, Greg KH wrote:
> On Fri, Mar 06, 2009 at 11:11:22AM -0800, Brandon Philips wrote:
> > Hello-
> >
> > When an UVC device is open and a S4 is attempted the thaw hangs (see the
> > stack below). I don't see what the UVC driver is doing wrong to cause
> > this to happen though.
>
On Sat, 7 Mar 2009, Brandon Philips wrote:
> On 21:26 Fri 06 Mar 2009, Greg KH wrote:
> > On Fri, Mar 06, 2009 at 11:11:22AM -0800, Brandon Philips wrote:
> > > Hello-
> > >
> > > When an UVC device is open and a S4 is attempted the thaw hangs (see the
> > > stack below). I don't see what the UVC
On 21:26 Fri 06 Mar 2009, Greg KH wrote:
> On Fri, Mar 06, 2009 at 11:11:22AM -0800, Brandon Philips wrote:
> > Hello-
> >
> > When an UVC device is open and a S4 is attempted the thaw hangs (see the
> > stack below). I don't see what the UVC driver is doing wrong to cause
> > this to happen thoug
On Fri, Mar 06, 2009 at 11:11:22AM -0800, Brandon Philips wrote:
> Hello-
>
> When an UVC device is open and a S4 is attempted the thaw hangs (see the
> stack below). I don't see what the UVC driver is doing wrong to cause
> this to happen though.
I don't think this is a uvc driver issue, it look
Hello-
When an UVC device is open and a S4 is attempted the thaw hangs (see the
stack below). I don't see what the UVC driver is doing wrong to cause
this to happen though.
To make it quick to reproduce you can use init=/bin/bash and a little
program to open up and setup the device:
http://ifup.
18 matches
Mail list logo