Thank you Allan!
Did this device that you use works in 1-seg? I think it is just full-seg!
Using the Siano based device I tried a better antenna and still
cannot scan channels.
I also tried the patches from Mauro and modified the device firmware
to isdbt_nova_12mhz_b0.inp forcing it to use
Hi Gabriel,
On 8/30/11, Gabriel Sartori gabriel.sart...@gmail.com wrote:
Thank you Allan!
Did this device that you use works in 1-seg? I think it is just full-seg!
Yes, it support both: 1-seg and full-seg.
In our device we use only 1-seg because your processor cannot decode full-seg.
Thank you Allan!
I tried that device and it worked fine in my workstation.
Now I will try this at my mx28 based board!!!
Best regards,
Gabriel Sartori
2011/8/30 Alan Carvalho de Assis acas...@gmail.com:
Hi Gabriel,
On 8/30/11, Gabriel Sartori gabriel.sart...@gmail.com wrote:
Thank you
Hi,
It worked in my i.mx28 based board also!
In my intel pc I used VLC to play video but I do not have a port of
VLC to my platform.
Is it possible to use gstreamer to play it?
Thanks a lot!
Gabriel Sartori
2011/8/30 Gabriel Sartori gabriel.sart...@gmail.com:
Thank you Allan!
Did
board and I would like to get a usb digital tv
module to work on it. It should work in 1seg.
First of all I bought a two usb devices:
- pixelview sbtvd hybrid
- Leadership
The first one uses driver cx231xx and the second one smsdvb.
My board have a 2.6.35 kernel with specific paths from
Hi Gabriel,
On 8/29/11, Gabriel Sartori gabriel.sart...@gmail.com wrote:
It there some devices that has more chance to work on a 2.6.35 kernel
version so I can just cross compile the driver to my mx28 board in a
easier way?
Thanks in advance.
I suggest you using a device based on dib0700,