Sakari Ailus wrote:
> Add event handling backend to V4L2. The backend handles event subscription
> and delivery to file handles. Event subscriptions are based on file handle.
> Events may be delivered to all subscribed file handles on a device
> independent of where they originate from.
Hi,
Some
Add event handling backend to V4L2. The backend handles event subscription
and delivery to file handles. Event subscriptions are based on file handle.
Events may be delivered to all subscribed file handles on a device
independent of where they originate from.
Signed-off-by: Sakari Ailus
---
driv
On 03/01/2010 08:45 AM, Hans Verkuil wrote:
On Friday 26 February 2010 20:43:19 Hans de Goede wrote:
Hi,
I'm happy to announce the first (test / beta) release of v4l-utils,
v4l-utils is the combination of various v4l and dvb utilities which
used to be part of the v4l-dvb mercurial kernel tree a
Hi Devin,
On Monday 01 March 2010 03:56:17 Devin Heitmueller wrote:
> This might seem like a bit of a silly question, but I've been banging
> my head on the wall for a while on this.
>
> I need to add a single private control to the saa7115 driver.
> However, it's not clear to me exactly how this
Hi Márton,
On Sunday 28 February 2010 08:55:04 Németh Márton wrote:
> From: Márton Németh
>
> On some webcams a feedback LED can be found. This LED usually shows
> the state of streaming mode: this is the "Auto" mode. The LED can
> be programmed to constantly switched off state (e.g. for power s
On Sunday 28 February 2010 20:38:00 Németh Márton wrote:
> Jean-Francois Moine wrote:
> > On Sun, 28 Feb 2010 08:55:04 +0100
> >
> > Németh Márton wrote:
> >> On some webcams a feedback LED can be found. This LED usually shows
> >> the state of streaming mode: this is the "Auto" mode. The LED can
Hello Laurent,
On Mon, Mar 1, 2010 at 3:57 AM, Laurent Pinchart
wrote:
> I don't think it should matter which API (the base one or the extended one)
> you use for controls, be they private, standard or whatever. I don't see a
> reason for disallowing some controls to be used through one or the ot
On Sun, 28 Feb 2010 20:38:00 +0100
Németh Márton wrote:
> With a bitfield on and off state can be specified. What about the
> "auto" mode? Should two bits grouped together to have auto, on and
> off state? Is there already a similar control?
>
> Is the brightness of the background light LEDs adj
Hi,
On 03/01/2010 09:33 AM, Hans de Goede wrote:
On 03/01/2010 08:45 AM, Hans Verkuil wrote:
On Friday 26 February 2010 20:43:19 Hans de Goede wrote:
Hi,
I'm happy to announce the first (test / beta) release of v4l-utils,
v4l-utils is the combination of various v4l and dvb utilities which
use
Hi,
do you know some usb video grabber (input rca or s-video, audio is not
important),
that are supported by one of these kernel modules:
kmod-video-gspca
kmod-video-nw8xx
kmod-video-ov51x-jpeg
kmod-video-quickcam
kmod-video-uvc
thank you
--
Denis Barbazza
--
To unsubscribe from this list: sen
> Hello Laurent,
>
> On Mon, Mar 1, 2010 at 3:57 AM, Laurent Pinchart
> wrote:
>> I don't think it should matter which API (the base one or the extended
>> one)
>> you use for controls, be they private, standard or whatever. I don't see
>> a
>> reason for disallowing some controls to be used thro
Hi Hans,
(...)
> Darn. Having a mini-summit without Laurent and yourself is pointless
> since
> you are both key developers.
>
> New proposal: May 5-7 in Lysaker, Norway.
>
> Does that work?
Most probably. Depending how the Media Controller thing looks by then we
consider sending a representati
On Mon, Mar 1, 2010 at 4:58 AM, Hans Verkuil wrote:
> New private controls should not use V4L2_CID_PRIVATE_BASE at all. That
> mechanism was a really bad idea. Instead a new control should be added to
> the appropriate control class and with a offset >= 0x1000. See for example
> the CX2341X privat
Date: Tue, 21 Jul 2009 18:45:50 +0200
From: Henrik Kurelid
The version number in the CA_PMT message sent to the hardware was
alwaysed set to zero. This could cause problems if the PMT would
change during decryption of a channel since the new CA_PMT would have
the same version number as the old. T
Date: Sun, 4 Oct 2009 15:00:36 +0200
From: Henrik Kurelid
The Digital Everywhere firmware have the shortcoming that ca_info_enq and
ca_info are not supported. This means that we can never retrieve the correct
ca_system_id to present in the CI message CA_INFO. Currently the driver uses
the applica
On Sun, 28 Feb 2010 19:54:25 +0100
Antonio Ospite wrote:
> On Sun, 28 Feb 2010 19:38:14 +0100
> Jean-Francois Moine wrote:
>
> > On Sat, 27 Feb 2010 21:20:22 +0100
> > Antonio Ospite wrote:
> >
> > > Exposure is now a u16 value, both MSB and LSB are set, but values in
> > > the v4l2 control a
> On Mon, Mar 1, 2010 at 4:58 AM, Hans Verkuil wrote:
>> New private controls should not use V4L2_CID_PRIVATE_BASE at all. That
>> mechanism was a really bad idea. Instead a new control should be added
>> to
>> the appropriate control class and with a offset >= 0x1000. See for
>> example
>> the C
> The Digital Everywhere firmware have the shortcoming that ca_info_enq and
> ca_info are not supported. This means that we can never retrieve the correct
> ca_system_id to present in the CI message CA_INFO. Currently the driver uses
> the application id retrieved using app_info_req and app_info, b
On Mon, 2010-03-01 at 15:36 +0900, Dmitri Belimov wrote:
> Hi All
>
> After rework of the IR subsystem, IR RC no more work in our TV cards.
> As I see
> call saa7134_probe_i2c_ir,
> configure i2c
> call i2c_new_device
>
> New i2c device not registred.
>
> The module kbd-i2c-ir loaded after
Hi,
Am Montag, 1. März 2010 10:26:47 schrieb Hans de Goede:
> >>> I'm happy to announce the first (test / beta) release of v4l-utils,
> >>> v4l-utils is the combination of various v4l and dvb utilities which
> >>> used to be part of the v4l-dvb mercurial kernel tree and libv4l.
>
> Reading some mo
On Mon, 2010-03-01 at 10:58 +0100, Hans Verkuil wrote:
> > Hello Laurent,
> >
> > On Mon, Mar 1, 2010 at 3:57 AM, Laurent Pinchart
> > wrote:
> >> I don't think it should matter which API (the base one or the extended
> >> one)
> >> you use for controls, be they private, standard or whatever. I do
Document that even if the state is a u8 value, both MSB and LSB are set
as sd->exposure represents half of the value we are going to set into
registers.
Skip setting exposure when AEC is enabled.
Signed-off-by: Antonio Ospite
---
The code was already doing the right thing, I just overlooked it.
* Indent with tabs, not with spaces, nor with mixed style.
* Less indentation for controls index comments.
* Use lowercase hex digits.
Signed-off-by: Antonio Ospite
---
Changes since v1:
Indent controls by one more level as JF requested.
Note that the controls "index comments" are still l
From: Henrik Kurelid
Subject: firedtv: add parameter to fake ca_system_ids in CA_INFO
The Digital Everywhere firmware have the shortcoming that ca_info_enq and
ca_info are not supported. This means that we can never retrieve the correct
ca_system_id to present in the CI message CA_INFO. Currently
> How will the locking be handled ? I suppose "opening a plane" and "closing
> a
> plane" will just be a matter of sending one (or several) messages to the
> VPSS.
> In that case what would prevent a userspace application from sending a
> direct
> message to close a plane that a driver would have o
Devin,
can you ask Prahal to keep this mailing list updated with the progress
of develop?
People from the list could help him in any need.
Thank you.
Adri
On 02/14/2010 06:33 PM, Florent NOUVELLON wrote:
> > Hi Devin,
> >
> > Did you with Prahal advanced the 0072/terratec hybrid xs fm support
Andy Walls wrote:
> On Mon, 2010-03-01 at 15:36 +0900, Dmitri Belimov wrote:
>> Hi All
>>
>> After rework of the IR subsystem, IR RC no more work in our TV cards.
>> As I see
>> call saa7134_probe_i2c_ir,
>> configure i2c
>> call i2c_new_device
>>
>> New i2c device not registred.
>>
>> The mod
On Sat, Feb 27, 2010 at 10:13:11PM -0800, Dmitry Torokhov wrote:
> The HID layer has some scan codes of the form 0xffbc for logitech
> devices which do not work if scancode is typed as signed int, so we need
> to switch to unsigned int instead. While at it keycode being signed does
> not make m
Devin Heitmueller wrote:
> Hello Mauro,
>
> Please PULL from
> http://kernellabs.com/hg/~dheitmueller/v4l-dvb-as102-2 for the
> following:
>
> as102: import initial as102 driver
> as102: checkpatch fixes
> as102: checkpatch fixes
> as102: checkpatch fixes
> as102: checkpatch fixes
> as102: checkp
On Mon, Mar 1, 2010 at 10:08 AM, Mauro Carvalho Chehab
wrote:
> Devin Heitmueller wrote:
>> Hello Mauro,
>>
>> Please PULL from
>> http://kernellabs.com/hg/~dheitmueller/v4l-dvb-as102-2 for the
>> following:
>>
>> as102: import initial as102 driver
>> as102: checkpatch fixes
>> as102: checkpatch f
On Mon, Mar 1, 2010 at 10:08 AM, Mauro Carvalho Chehab
wrote:
> Devin Heitmueller wrote:
>> Hello Mauro,
>>
>> Please PULL from
>> http://kernellabs.com/hg/~dheitmueller/v4l-dvb-as102-2 for the
>> following:
>>
>> as102: import initial as102 driver
>> as102: checkpatch fixes
>> as102: checkpatch f
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Mon Mar 1 19:00:17 CET 2010
path:http://www.linuxtv.org/hg/v4l-dvb
changeset: 14320:37ff78330942
gcc version: i686-
Hello,
light source is not related to LEDs, it is for the kind of light
source (tungsten, etc). The Windows driver had this control beside the
white balance. I could remove this new control as under Windows the
white balance is achieved by software and not hardware so the white
balance control is
Hi Devin,
Devin Heitmueller wrote:
> On Mon, Mar 1, 2010 at 4:58 AM, Hans Verkuil wrote:
>> New private controls should not use V4L2_CID_PRIVATE_BASE at all. That
>> mechanism was a really bad idea. Instead a new control should be added to
>> the appropriate control class and with a offset >= 0x1
On Mon, 2010-03-01 at 19:03 +1100, Rodd Clarkson wrote:
> usb 1-4: Manufacturer: Hauppauge Computer Works
> ...
> smscore_set_device_mode: firmware download success:
> sms1xxx-nova-b-dvbt-01.fw
I hate replying to myself, but I should have mentioned that
sms1xxx-nova-b-dvbt-01.fw is a renamed sms
Hi
Add defines for all registers of the tm6000 module.
This defines made by doc for TM6010, need look docs for TM6000 and TM5600
Some registers can be different.
diff -r 7405c726743a linux/drivers/staging/tm6000/tm6000-regs.h
--- a/linux/drivers/staging/tm6000/tm6000-regs.hMon Feb 22 07:4
Hi all,
I'm encountering a problem with the Audio4DJ audio card with a DVB
USB adapter (Win-TV NOVA-T USB2 STICK).
The problem is strange because it only happens after I disconnect and
reconnect the audio card.
Procedure 1:
- boot from fresh
- plug the DVB adapter
- plug the Audio4DJ
Everythin
Hi,
Am Montag, den 01.03.2010, 10:37 -0300 schrieb Mauro Carvalho Chehab:
> Andy Walls wrote:
> > On Mon, 2010-03-01 at 15:36 +0900, Dmitri Belimov wrote:
> >> Hi All
> >>
> >> After rework of the IR subsystem, IR RC no more work in our TV cards.
> >> As I see
> >> call saa7134_probe_i2c_ir,
> >
Hi
Not work I2C IR RC. GPIO RC I think works well.
This patch remove addr of our RC from switch-case
http://linuxtv.org/hg/v4l-dvb/rev/f700bce82813
When I set debug for ir-kbd-i2c I get
ir-kbd-i2c: :Unsupported device at address 0x2d
People with broken IR RC what addr has your I2C IR RC?
Wi
On 03/01/10 20:34, Andy Walls wrote:
On Mon, 2010-03-01 at 11:07 -0500, Mark Lord wrote:
I'm using MythTV-0.21-fixes (from svn) on top of Linux-2.6.33 (from kernel.org),
with an HVR-1600 tuner card. This card usually works okay (with workarounds for
the known analog recording bugs) in both anal
40 matches
Mail list logo