This enables tca6424a GPIO expander driver that in turn enables
TPD12S015 HDMI ESD protection and level shifter on OMAP5 uevm.
In other words, it makes HDMI work on OMAP5 uevm.
Signed-off-by: Grazvydas Ignotas
---
arch/arm/configs/omap2plus_defconfig | 1 +
1 file changed, 1
The i2c5 pinctrl offsets are wrong. If the bootloader doesn't set the
pins up, communication with tca6424a doesn't work (controller timeouts)
and it is not possible to enable HDMI.
Fixes: 9be495c42609 ("ARM: dts: omap5-evm: Add I2c pinctrl data")
Signed-off-by: Grazvydas Ignotas
On 09/14/2015 07:12 PM, Tony Lindgren wrote:
> * Peter Ujfalusi [150911 05:35]:
>> Move the code out from arch/arm/common and merge it inside of the dmaengine
>> driver.
>> This change is done with as minimal change to the code as possible to avoid
>> any possibilities to
Remove write to REG_IRQCLR and REG_IRQWAKEUP in interrupt handler for
IRQENB_HW_PEN as the resume handler should and does clear REG_IRQWAKEUP.
IRQENB_HW_PEN bit is set in irqclr so that all interrupts get cleared
later so let IRQENB_HW_PEN be cleared by that.
Without this patch wakeup events from
The following changes since commit 6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f:
Linux 4.3-rc1 (2015-09-12 16:35:56 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap
tags/omap-for-v4.3/fixes-rc1
for you to fetch changes up to
* Tony Lindgren [150915 08:54]:
>
> - Fix pbias regulator compatible values as a pending regulator
> fix needs those for MMC1 to work properly
And when the pbias regulator fix hits mainline, I'll send
one more pull request to correct the reg entries for pbias
for the MMC
On Wed 2015-09-09 21:58:09, Eduardo Valentin wrote:
> From: Pavel Machek
>
> This adds support for OMAP3 chips to ti-soc-thermal. As requested by
> TI people, it is marked unreliable and warning is printed.
>
> Cc: Zhang Rui
> Cc: linux...@vger.kernel.org
>
On Thu 2015-07-30 10:11:24, NeilBrown wrote:
>
> Add a 'continuous' option for usb charging which enables
> the "linear" charging mode of the twl4030.
>
> Linear charging does a good job with not-so-reliable power sources.
> Auto mode does not work well as it switches off when voltage drops
>
Hi all,
On Tue, Sep 15, 2015 at 1:28 PM, Pavel Machek wrote:
> On Thu 2015-07-30 10:11:24, NeilBrown wrote:
>>
>> Add a 'continuous' option for usb charging which enables
>> the "linear" charging mode of the twl4030.
>>
>> Linear charging does a good job with not-so-reliable power
On Mon, Sep 14, 2015 at 05:23:17PM -0700, Stephen Boyd wrote:
> Now that __cpuinit has been removed, the __ref markings on these
> functions are useless. Remove them. This also reduces the size of
> the multi_v7_defconfig image:
>
> $ size before after
>textdata bss dec hex
On Mon, Sep 14, 2015 at 10:35 PM, Dr. H. Nikolaus Schaller
wrote:
>
> Am 14.09.2015 um 21:02 schrieb Tony Lindgren :
>
>> * Russell King - ARM Linux [150914 05:16]:
>>> On Fri, Sep 11, 2015 at 03:03:07PM +0100, Russell King - ARM
From: Mugunthan V N
Date: Mon, 7 Sep 2015 15:16:44 +0530
> In DRA72x EVM, by default slave 1 is connected to the onboard
> phy, but slave 2 pins are also muxed with video input module
> which is controlled by pcf857x gpio and currently to select slave
> 0 to connect to phy
Add omap2_clk_enable_autoidle_all to am43xx_init_late otherwise the call
to omap2_clk_disable_autoidle_all in am43xx_init_early may cause some
clocks to always stay active and prevent low power mode transitions.
Signed-off-by: Dave Gerlach
---
arch/arm/mach-omap2/io.c | 1 +
1
Add missing zero to value. This will be needed when range checking
is implemented.
Signed-off-by: Andrew F. Davis
---
drivers/regulator/tps65218-regulator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/tps65218-regulator.c
On 15/09/15 01:23, Stephen Boyd wrote:
Now that __cpuinit has been removed, the __ref markings on these
functions are useless. Remove them. This also reduces the size of
the multi_v7_defconfig image:
$ size before after
textdata bss dec hex filename
12683578
Tony,
On 03/09/15 10:36, Roger Quadros wrote:
> Chanwoo,
>
> On 06/08/15 02:36, Chanwoo Choi wrote:
>> On 08/05/2015 07:37 PM, Tony Lindgren wrote:
>>> * Roger Quadros [150727 06:13]:
The VBUS line of USB2 is connected to VBUS detect logic on
the PMIC. Use the
On Thu 2015-07-30 10:11:24, NeilBrown wrote:
> The twl4030 usb phy needs to be active while we are using
> the USB VBUS as a current source for charging.
> In particular, the usb3v1 regulator must be enabled and the
> PHY_PWR_PHYPWD bit must be set to keep the phy powered.
>
> commit
On Thu 2015-07-30 10:11:24, NeilBrown wrote:
> The usb phy driver already determines when VBUS is available,
> so repeating the test in the charger driver is pointless duplication.
>
> On probe, process the last event from the phy, and from then on,
> do whatever the phy tells us without
McASP3 is used by default on DRA7x based boards for audio.
Signed-off-by: Peter Ujfalusi
---
Hi Paul,
this patch is part of my earlier series and as Tony suggested I'll resend the
hwmod patch for you to review since I missed you from the TO in the series.
The original
This change is needed to properly lock I2C bus driver, which serves DDC.
Prior to this change i2c_put_adapter() is misused, which may lead to
an overflow over zero of I2C bus driver user counter.
Signed-off-by: Vladimir Zapolskiy
---
Changes from v1 to v2:
- none,
On Mon, Sep 14, 2015 at 05:23:17PM -0700, Stephen Boyd wrote:
[...]
> arch/arm/mach-tegra/hotplug.c| 2 +-
Acked-by: Thierry Reding
signature.asc
Description: PGP signature
OMAP AES hw supports AES-GCM mode.
Adding support for GCM and RFC4106 GCM mode in omap-aes driver.
Signed-off-by: Lokesh Vutla
---
Tested on BeagleBone-Black: http://pastebin.ubuntu.com/12417512/
Changes since v1:
- Addressed comments by Herbert.
Previously posted here:
Add new device tree node for the control module register space where
PCIe registers are present.
Signed-off-by: Kishon Vijay Abraham I
---
arch/arm/boot/dts/dra7.dtsi |5 +
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi
Add "syscon-phy-power" property and remove the deprecated "ctrl-module"
property from SATA and USB PHY node. Also remove the unused control
module dt nodes.
Signed-off-by: Kishon Vijay Abraham I
---
arch/arm/boot/dts/am4372.dtsi | 16 ++--
The USB2 PHY2 has a different register map compared to USB2 PHY1
to power on/off the PHY. In order to handle it, use the new compatible
string "ti,dra7x-usb2-phy2" for the second instance of USB2 PHY.
Signed-off-by: Kishon Vijay Abraham I
---
arch/arm/boot/dts/dra7.dtsi |2 +-
This series is basically to deprecate using ctrl-module property and use
corresponding syscon properties to program the control module registers.
Changes from v1:
*) Squashed the patches that replaces "ctrl-module" with
"syscon-phy-power"
*) Added "syscon-phy-power" for SATA dt node in OMAP5
Add "syscon-phy-power" property and "syscon-pcs" property which can
be used to perform the control module initializations and remove
the deprecated "ctrl-module" property from PCIe PHY dt nodes.
Phandle to "sysclk" clock node is also added to the PCIe PHY node
since some of the syscon
On 06/09/15 05:20, Peter Chen wrote:
> On Wed, Sep 02, 2015 at 09:43:38AM -0500, Felipe Balbi wrote:
>> Hi,
>>
>>> +
>>> +static irqreturn_t dwc3_otg_irq(int irq, void *_dwc)
>>> +{
>>> + struct dwc3 *dwc = _dwc;
>>> + irqreturn_t ret = IRQ_NONE;
>>> + u32 reg;
>>> +
>>> +
28 matches
Mail list logo