Add a correct MODULE_ALIAS() entry for this driver to enable udev module
loading.
Signed-off-by: Hiroshi DOYU [EMAIL PROTECTED]
---
drivers/input/keyboard/omap-twl4030keypad.c |2 ++
drivers/input/touchscreen/tsc2005.c |2 +-
drivers/mmc/host/omap_hsmmc.c |3 ++-
Hi,
A few minor comments based on a quick look.
In terms of the OMAP3 code, is that for retention-idle only,
or does it work with off-idle also?
That patch should basically work in off-mode also, however it requires
correct settings in the padconfig registers which are currently done in
the
From: Iqbal Shareef [EMAIL PROTECTED]
Separate out 3430 LCD panel support from 2430 SDP.
Currently the support for the LCD on 3430SDP is added in the lcd_2430sdp.c
file. This patch separates it out to a new file.
Signed-off-by: Iqbal Shareef [EMAIL PROTECTED]
---
On Thu, 12 Jun 2008 05:24:32 -0500, [EMAIL PROTECTED] wrote:
From: Iqbal Shareef [EMAIL PROTECTED]
Separate out 3430 LCD panel support from 2430 SDP.
Currently the support for the LCD on 3430SDP is added in the
lcd_2430sdp.c
file. This patch separates it out to a new file.
You're at
On Thu, 12 Jun 2008 17:24:49 +0530, Gadiyar, Anand [EMAIL PROTECTED]
wrote:
Separate out 3430 LCD panel support from 2430 SDP.
Currently the support for the LCD on 3430SDP is added in the
lcd_2430sdp.c
file. This patch separates it out to a new file.
You're at least missing 3430sdp
Jarkko,
I've been using this patch with good results while developing an alsa
soc driver for the 35XX EVM and beagleboard.
Do you have plans to to officially submit this patch (or a more recent
version of it)?
Steve
On Tue, May 20, 2008 at 4:21 AM, Jarkko Nikula [EMAIL PROTECTED] wrote:
On
Hi! All
I am new to OMAP3430,
I am trying to do DMA transfer from one Memory location to another on RAM.
First Scenario is
I am Allocating 1024bytes (KMALLOC) for both SRC DEST
and after taking physical address (__pa) of allocated addresses I am
passing it to DMA tarnsfer.
in this case first
Somz,
I'm not sure I quite comprehend the two transfers you mention.
Regardless, please send your System DMA parameters for the
transfer.
Did you perform a cache invalidate of the DEST buffer to ensure
you are seeing new data when performing a read by the CPU from DEST
Viraj,
I think in order to read the tags you have to be in secure mode,
so this approach might not be possible.
Thank you,
Best regards,
Hari
-Original Message-
From: Viraj Karandikar [mailto:[EMAIL PROTECTED]
Sent: Tuesday, June 10, 2008 11:33 PM
To: Kanigeri, Hari;