On Fri, Oct 5, 2012 at 3:34 AM, Tony Lindgren t...@atomide.com wrote:
We need to remove this from plat for ARM common zImage
support.
Cc: Chris Ball c...@laptop.org
Cc: Venkatraman S svenk...@ti.com
Cc: linux-...@vger.kernel.org
Signed-off-by: Tony Lindgren t...@atomide.com
Thanks Tony. I
Hi,
On Friday 05 October 2012 07:09 AM, Tony Lindgren wrote:
* Felipe Balbi ba...@ti.com [121004 11:04]:
Hi,
On Thu, Oct 04, 2012 at 10:31:08AM -0700, Tony Lindgren wrote:
Hi Felipe Kishon,
Looks like musb is broken at least on pandaboard es
in current linux next while it works with v3.6:
Matt,
On Wed, Oct 03, 2012 at 20:30:58, Porter, Matt wrote:
On Fri, Sep 28, 2012 at 03:37:45PM -0400, Matt Porter wrote:
Changes since v1:
- Replaced uio_pruss private SRAM API use with genalloc
- Added DA850 platform device and clock support
- Added DA850 L3 RAM gen_pool
From: G, Manjunath Kondaiah manj...@ti.com
SMSC ECE1099 is a keyboard scan or GPIO expansion device.The device
supports a keypad scan matrix of 23*8.This driver uses this
device as a keypad driver.
Tested on omap5430 evm with 3.6-rc6 custom kernel.
Cc: Benoit Cousson b-cous...@ti.com
Cc: Felipe
On Fri, Oct 5, 2012 at 1:08 AM, Kevin Hilman
khil...@deeprootsystems.com wrote:
Thomas Petazzoni thomas.petazz...@free-electrons.com writes:
On Thu, 4 Oct 2012 22:30:58 +0200, Enric Balletbò i Serra wrote:
I recently tested kernel 3.6-rc5 and worked for me. Let me check tomorrow
kernel 3.6.
On 10/04/2012 05:17 PM, Florian Fainelli :
Merge ohci_finish_controller_resume with ohci_resume as suggested by Alan
Stern. Since ohci_finish_controller_resume no longer exists, update the
various OHCI drivers to call ohci_resume() instead. Some drivers used to set
themselves the bit
Kevin,
On Thu, 04 Oct 2012 16:06:27 -0700, Kevin Hilman wrote:
It seems they are exactly the same, unless my eyes missed
something, of course.
The example I gave was only for the UART3 RX, you should dump the
UART3 TX pins as. Using the omap_mux debugfs, you can see all of the
On Fri, Oct 5, 2012 at 1:40 AM, Kevin Hilman
khil...@deeprootsystems.com wrote:
jean.pi...@newoldbits.com writes:
From: Jean Pihet j-pi...@ti.com
Remove the device dependent code (ex. cpu_is_xxx()) and settings
from the driver code and instead pass them via the platform
data. This allows a
On Fri, 5 Oct 2012 09:32:07 +0200, Javier Martinez Canillas wrote:
As Enric said, u-boot has SPL and NAND support for IGEP since
v2012.10-rc1. I just tried kernel a 3.6 with u-boot v2012.10-rc2 and
it works for me.
Ok, I'll try this out.
But I agree that the kernel shouldn't do any
On Thu, Oct 04, 2012 at 15:51:03, Philip, Avinash wrote:
On Thu, Oct 04, 2012 at 00:50:45, Ivan Djelic wrote:
On Wed, Oct 03, 2012 at 03:29:49PM +0100, Philip, Avinash wrote:
ELM module can be used for error correction of BCH 4 8 bit. Also
support read write page in one shot by adding
On Friday 05 October 2012 03:34 AM, Tony Lindgren wrote:
There's no need to keep the device related things in the
common i2c.c as omap2+ is using hwmod. Split the code to
mach-omap1 and mach-omap2 parts and only leave common
code to plat-omap/i2c.c.
Note that as omap1 only has one i2c
The resume_noirq enables interrupts one-by-one starting from
first one. Now if the wake up event for suspend came from i2c
device, the i2c bus irq gets enabled before the threaded
i2c device irq, causing a flood of i2c bus interrupts as the
threaded irq that should clear the event is not enabled
A pointer to pdev-dev is already stored in dev, so use it in
devm_kzalloc.
Signed-off-by: Tobias Klauser tklau...@distanz.ch
---
drivers/gpio/gpio-omap.c |2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index
Hi,
On Friday 31 August 2012 01:58 PM, Archit Taneja wrote:
On Friday 31 August 2012 01:57 PM, Tomi Valkeinen wrote:
On Fri, 2012-08-31 at 13:50 +0530, Archit Taneja wrote:
On Friday 31 August 2012 12:45 PM, Tomi Valkeinen wrote:
On Fri, 2012-08-31 at 11:53 +0530, Archit Taneja wrote:
The
On Fri, Oct 5, 2012 at 10:10 AM, Thomas Petazzoni
thomas.petazz...@free-electrons.com wrote:
On Fri, 5 Oct 2012 09:32:07 +0200, Javier Martinez Canillas wrote:
As Enric said, u-boot has SPL and NAND support for IGEP since
v2012.10-rc1. I just tried kernel a 3.6 with u-boot v2012.10-rc2 and
In order to reflect devices(usb_phy) attached to ocp2scp bus, ocp2scp
is assigned a device attribute to represent the attached devices.
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
Cc: Benoit Cousson b-cous...@ti.com
---
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 28
This patch series allows ocp2scp driver to create its child devices
from the platform data.
In omap platforms, usb phy is connected to ocp2scp and usb phy is needed
for MUSB to be functional. When ocp2scp driver was added, it had only dt
support which means it wont create usb phy devices for
ocp2scp was not having pdata support which makes *musb* fail for non-dt
boot in OMAP platform. The pdata will have information about the devices
that is connected to ocp2scp. ocp2scp driver will now make use of this
information to create the devices that is attached to ocp2scp.
Signed-off-by:
Platfrom device for ocp2scp is created using omap_device_build in
devices file. This is used for both omap4(musb) and omap5(dwc3).
Signed-off-by: Kishon Vijay Abraham I kis...@ti.com
---
arch/arm/mach-omap2/devices.c | 72 +
1 file changed, 72
On Thu, 2012-10-04 at 10:56 -0700, Tony Lindgren wrote:
Hi,
FYI, looks like for some reason DSS command line is not
working for HDMI while it works for DSS. On my panda es
I'm trying to set my motorola lapdock resolution from
cmdline with:
omapdss.def_disp=hdmi
Hi Archit,
On 10/05/2012 11:46 AM, Archit Taneja wrote:
Hi,
On Friday 31 August 2012 01:58 PM, Archit Taneja wrote:
On Friday 31 August 2012 01:57 PM, Tomi Valkeinen wrote:
On Fri, 2012-08-31 at 13:50 +0530, Archit Taneja wrote:
On Friday 31 August 2012 12:45 PM, Tomi Valkeinen wrote:
On
On Friday 05 October 2012 05:50 PM, Benoit Cousson wrote:
Hi Archit,
On 10/05/2012 11:46 AM, Archit Taneja wrote:
Hi,
On Friday 31 August 2012 01:58 PM, Archit Taneja wrote:
On Friday 31 August 2012 01:57 PM, Tomi Valkeinen wrote:
On Fri, 2012-08-31 at 13:50 +0530, Archit Taneja wrote:
On
On Sat, 2012-09-29 at 16:19 +0530, Chandrabhanu Mahapatra wrote:
The omap_dispc_unregister_isr() and _dsi_print_reset_status() consist of a
number of debug prints which need to be enabled all at once or none at all.
So,
these debug prints in corresponding functions are replaced with one
On Friday 05 October 2012 05:59 PM, Archit Taneja wrote:
The other not so good option to make DSS PM work would be to add
OCPIF_SWSUP_IDLE flag to our l3_main_2__dss_* slave interfaces(which
have the hack dss_fck as slave clock). I gave this approach a try,
that too isn't working so well. When I
On Sat, 2012-09-29 at 16:19 +0530, Chandrabhanu Mahapatra wrote:
Hi everyone,
this patch series aims at cleaning up of DSS of printk()'s enabled with
dss_debug and replace them with generic dynamic debug printing.
Except for the missing debug print conversions in dsi.c this looks good.
Do you
On Friday 05 October 2012 06:07 PM, Rajendra Nayak wrote:
On Friday 05 October 2012 05:59 PM, Archit Taneja wrote:
The other not so good option to make DSS PM work would be to add
OCPIF_SWSUP_IDLE flag to our l3_main_2__dss_* slave interfaces(which
have the hack dss_fck as slave clock). I gave
If the clkdm is in HW_AUTO, I can get DSS in sleep(STBYST and IDLEST all
set). Is this helpful? Can we just leave modulemode on all the time?
That'll be the best :)
Is everything around DSS enabled by default in omap2plus? If so, I
haven't seen Tero (who has been working on getting OMAP4 to
On Friday 05 October 2012 07:01 PM, Rajendra Nayak wrote:
If the clkdm is in HW_AUTO, I can get DSS in sleep(STBYST and IDLEST all
set). Is this helpful? Can we just leave modulemode on all the time?
That'll be the best :)
Is everything around DSS enabled by default in omap2plus? If so, I
On 10/05/2012 03:20 PM, Archit Taneja wrote:
On Friday 05 October 2012 06:07 PM, Rajendra Nayak wrote:
On Friday 05 October 2012 05:59 PM, Archit Taneja wrote:
The other not so good option to make DSS PM work would be to add
OCPIF_SWSUP_IDLE flag to our l3_main_2__dss_* slave interfaces(which
Hi Tony,
On 10/04/2012 05:04 PM, Tony Lindgren wrote:
We can move this from plat to be local to plat-omap
for common ARM zImage support.
Signed-off-by: Tony Lindgren t...@atomide.com
---
arch/arm/mach-omap1/clock.c |3 -
arch/arm/mach-omap1/clock_data.c |
On Fri, Oct 05, 2012 at 09:51:50AM +0100, Philip, Avinash wrote:
On Thu, Oct 04, 2012 at 15:51:03, Philip, Avinash wrote:
On Thu, Oct 04, 2012 at 00:50:45, Ivan Djelic wrote:
On Wed, Oct 03, 2012 at 03:29:49PM +0100, Philip, Avinash wrote:
ELM module can be used for error correction of
.
This series is same as v7, except that last 4 patches in v7 has been
removed from this series (those 4 patches were for generic timing)
This series is available
@ git://gitorious.org/x0148406-public/linux-kernel.git gpmc-prep-v8
and is based on
linux-next (next-20121005)
Regards
Helper function for updating nand platform data has been
added the capability to take timing structure arguement.
Usage of omap_nand_flash_init() has been replaced by modifed
one, omap_nand_flash_init was doing things similar to
board_nand_init except that NAND CS# were being acquired
based on
gpmc_cs_set_timings() calculate ticks to be programmed by
rounding time in ns to next tick value. Hence remove
redundant rounding of nanosecond timing.
Signed-off-by: Afzal Mohammed af...@ti.com
---
arch/arm/mach-omap2/gpmc-nand.c | 30 +-
1 file changed, 13
Configure busturnaround, cycle2cycledelay, waitmonitoringtime,
clkactivationtime in gpmc_cs_set_timings(). This is done so
that boards can configure these parameters of gpmc in Kernel
instead of relying on bootloader. Also configure bool type
timings like extradelay.
This needed change to the
Refactor set_async_mode set_sync_mode functions to
separate out timing calculation actual configuration
(GPMC OneNAND side).
Thanks to Jon for his suggestions.
Signed-off-by: Afzal Mohammed af...@ti.com
Reviewed-by: Jon Hunter jon-hun...@ti.com
---
arch/arm/mach-omap2/gpmc-onenand.c | 174
From: Jon Hunter jon-hun...@ti.com
A platform function pointer for getting the frequency of a OneNAND device
was added so that a platform could specify a custom function for returning
the frequency and not just rely on the OneNAND version to determine the
frequency. However, this platform
Divider value for a certain sync clk is determined solely
based on gpmc fclk. CS# does not have any role here, thus
remove presence of CS# in clock divider calculation API.
Signed-off-by: Afzal Mohammed af...@ti.com
Reviewed-by: Jon Hunter jon-hun...@ti.com
---
arch/arm/mach-omap2/gpmc-onenand.c
-public/linux-kernel.git gpmc-prep-v8
and is based on
linux-next (next-20121005)
Regards
Afzal
v8:
Remove generic timing conversion patches
v7:
1. Use picoseconds throughout generic timing routine to prevent
rounding error.
2. Documentation on gpmc
+ Jon and Paul
On Fri, Oct 05, 2012 at 21:05:54, Mohammed, Afzal wrote:
Helper function for updating nand platform data has been
added the capability to take timing structure arguement.
Usage of omap_nand_flash_init() has been replaced by modifed
one, omap_nand_flash_init was doing things
on
linux-next (next-20121005)
and is dependent on
http://marc.info/?l=linux-omapm=134945131602622w=2
Regards
Afzal
Afzal Mohammed (15):
ARM: OMAP2+: gpmc: annotate exit sections properly
mtd: onenand: omap: cleanup gpmc dependency
mtd: nand: omap: free region as per resource size
compiler complained,
`gpmc_remove' referenced in section `.data' of arch/arm/mach-omap2/built-in.o:
defined in discarded section `.exit.text' of arch/arm/mach-omap2/built-in.o
Annotate gpmc_remove function and dependents with __devexit.
Reported-by: Tony Lindgren t...@atomide.com
Signed-off-by:
requesting, freeing gpmc cs is now handled fully
by gpmc, remove left out gpmc dependency as well
as unnecessary include of gpmc.h
Signed-off-by: Afzal Mohammed af...@ti.com
---
drivers/mtd/onenand/omap2.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/mtd/onenand/omap2.c
memory as is now obtained via resource, upon freeing use
resource size. This also helps get rid of one macro.
Signed-off-by: Afzal Mohammed af...@ti.com
---
drivers/mtd/nand/omap2.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/omap2.c
Now that gpmc-nand registers are available in driver, use it
to read nand data.
65b97cf mtd: nand: omap2: handle nand on gpmc modified all
other instances. After initial versions of that patch, a new
change added reading nand data using gpmc exposed function.
In the final version this change was
onenand driver needs to know whether soc is falling under
34xx family to properly handle onenand. But driver is not
supposed to do cpu_is_* check, hence educate platform data
with this information. Driver can make use of it to avoid
cpu_is_* check.
Signed-off-by: Afzal Mohammed af...@ti.com
---
platform data now contains a field to indicate whether
soc belongs to omap34xx family, use it instead of
cpu_is_* check.
This helps in removing dependency of platform specific
header file - cpu.h
Signed-off-by: Afzal Mohammed af...@ti.com
---
drivers/mtd/onenand/omap2.c | 7 ---
1 file
For common arm zImage existing onenand header file
in platform specific location was moved to generic
platform data location, but it contained more than
platform data, remove it. New local header has been
created for exposing functions.
Signed-off-by: Afzal Mohammed af...@ti.com
---
For common arm zImage existing onenand header file
in platform specific location was moved to generic
platform data location, but it contained more than
platform data, remove it. New local header has been
created for exposing functions.
Also move gpmc-nand platform data to platform header
meant
Bring onto driver the macros defined in gpmc.h that are
not necessary outside driver, helps in removing inclusion
of gpmc.h too. Also remove GPMC prefix on those macros to
make clear it's independence with gpmc header.
Signed-off-by: Afzal Mohammed af...@ti.com
---
drivers/mtd/nand/omap2.c | 21
Capability of bch schemes could be discovered using soc
revision checks. If soc revision indicates that selected
ecc scheme is not supported bail out.
Signed-off-by: Afzal Mohammed af...@ti.com
---
arch/arm/mach-omap2/gpmc-nand.c | 24
1 file changed, 24 insertions(+)
Update helper function that provides gpmc-nand register
details for nand driver with bch register information.
Using this nand driver can be made self sufficient to
handle remaining gpmc-nand operations by itself instead
of relying on gpmc exported nand functions.
Signed-off-by: Afzal Mohammed
gpmc-nand bch registers are now available in driver,
make use of it to handle bch[48] instead of relying
on gpmc exported functions.
Signed-off-by: Afzal Mohammed af...@ti.com
---
drivers/mtd/nand/omap2.c | 95 +++-
1 file changed, 86 insertions(+), 9
nand driver handles gpmc-nand block fully, hence no more
users for these exported nand functions, remove it.
Signed-off-by: Afzal Mohammed af...@ti.com
---
arch/arm/mach-omap2/gpmc.c | 432 -
arch/arm/plat-omap/include/plat/gpmc.h | 31 ---
2 files
nand driver no longer needs gpmc header, remove it.
Signed-off-by: Afzal Mohammed af...@ti.com
---
drivers/mtd/nand/omap2.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
index e3fc8d7..d6664d7 100644
--- a/drivers/mtd/nand/omap2.c
+++
Requirement of gpmc header outside of mach-omap2 has been
cutoff, move gpmc header file in plat-omap folder to local
mach-omap2 folder
Objective - common zImage participation of omap
Signed-off-by: Afzal Mohammed af...@ti.com
---
arch/arm/mach-omap2/board-2430sdp.c| 2 +-
by simulating on OMAP3EVM.
This series is available
@ git://gitorious.org/x0148406-public/linux-kernel.git gpmc-timing-v1
and is based on
linux-next (next-20121005)
and is dependent on
http://marc.info/?l=linux-omapm=134945131602622w=2
http://marc.info/?l=linux
Presently there are three peripherals that gets it timing
by runtime calculation. Those peripherals can work with
frequency scaling that affects gpmc clock. But timing
calculation for them are in different ways.
Here a generic runtime calculation method is proposed. Input
to this function were
Generic gpmc timing calculation helper is available now, use
it instead of custom timing calculation.
Signed-off-by: Afzal Mohammed af...@ti.com
---
arch/arm/mach-omap2/gpmc-onenand.c | 124 +
1 file changed, 43 insertions(+), 81 deletions(-)
diff --git
Generic gpmc timing calculation helper is available now, use
it instead of custom timing calculation.
Signed-off-by: Afzal Mohammed af...@ti.com
---
arch/arm/mach-omap2/gpmc-smc91x.c | 43 ---
1 file changed, 17 insertions(+), 26 deletions(-)
diff --git
Generic gpmc timing calculation helper is available now, use
it instead of custom timing calculation.
Signed-off-by: Afzal Mohammed af...@ti.com
---
arch/arm/mach-omap2/usb-tusb6010.c | 182 +
1 file changed, 44 insertions(+), 138 deletions(-)
diff --git
Merge ohci_finish_controller_resume with ohci_resume as suggested by Alan
Stern. Since ohci_finish_controller_resume no longer exists, update the
various OHCI drivers to call ohci_resume() instead. Some drivers used to set
themselves the bit HCD_FLAG_HW_ACCESSIBLE, which is now handled by
* Tony Lindgren t...@atomide.com [121004 18:41]:
Also on the EHCI port, I've seen issues where unplugging
the cable hangs kernel with an infinite loop. But that happens
only occasionally, sorry does not seem to happen right
now so no output to paste here. Or maybe this issue
has
* Tomi Valkeinen tomi.valkei...@ti.com [121005 04:06]:
On Thu, 2012-10-04 at 10:56 -0700, Tony Lindgren wrote:
Hi,
FYI, looks like for some reason DSS command line is not
working for HDMI while it works for DSS. On my panda es
I'm trying to set my motorola lapdock resolution from
This is needed for the ARM common zImage support.
We can use the existing slot features to pass omap1
specific options to the driver. For omap2 we don't
want to pass anything new as that will be eventually
moved to use device tree based init.
Note that this patch depends on earlier patch that
* Venkatraman S svenk...@ti.com [121004 23:40]:
On Fri, Oct 5, 2012 at 3:34 AM, Tony Lindgren t...@atomide.com wrote:
We need to remove this from plat for ARM common zImage
support.
Cc: Chris Ball c...@laptop.org
Cc: Venkatraman S svenk...@ti.com
Cc: linux-...@vger.kernel.org
Hi Tony,
On Fri, Oct 05 2012, Tony Lindgren wrote:
This is needed for the ARM common zImage support.
We can use the existing slot features to pass omap1
specific options to the driver. For omap2 we don't
want to pass anything new as that will be eventually
moved to use device tree based
Tobias Klauser tklau...@distanz.ch writes:
A pointer to pdev-dev is already stored in dev, so use it in
devm_kzalloc.
Signed-off-by: Tobias Klauser tklau...@distanz.ch
Acked-by: Kevin Hilman khil...@ti.com
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of
* Chris Ball c...@laptop.org [121005 11:24]:
Hi Tony,
On Fri, Oct 05 2012, Tony Lindgren wrote:
This is needed for the ARM common zImage support.
We can use the existing slot features to pass omap1
specific options to the driver. For omap2 we don't
want to pass anything new as that
Hi,
* Marc Zyngier marc.zyng...@arm.com [120907 10:04]:
From: Dave Martin dave.mar...@linaro.org
This patch does two things:
* Ensure that asynchronous aborts are masked at kernel entry.
The bootloader should be masking these anyway, but this reduces
the damage window just in
On Fri, Oct 05, 2012 at 04:43:56AM +, Hebbar, Gururaja wrote:
Matt,
On Wed, Oct 03, 2012 at 20:30:58, Porter, Matt wrote:
On Fri, Sep 28, 2012 at 03:37:45PM -0400, Matt Porter wrote:
Changes since v1:
- Replaced uio_pruss private SRAM API use with genalloc
- Added DA850
+Grygorii (who's been working on various I2C related suspend/resume
issues also)
Hi Kalle,
Kalle Jokiniemi kalle.jokini...@jollamobile.com writes:
The resume_noirq enables interrupts one-by-one starting from
first one. Now if the wake up event for suspend came from i2c
device, the
Hello.
On 05-10-2012 12:07, Kishon Vijay Abraham I wrote:
Platfrom device for ocp2scp is created using omap_device_build in
devices file. This is used for both omap4(musb) and omap5(dwc3).
Signed-off-by: Kishon Vijay Abraham Ikis...@ti.com
---
arch/arm/mach-omap2/devices.c | 72
* Peter Ujfalusi peter.ujfal...@ti.com [121004 04:57]:
Hello,
u-boot recently stopped configuring 'non essential' pin mux. This change
leaves
the audio essential pins in non configured state which prevents the use of
audio.
The following series makes sure that the needed pins are
On Fri, Oct 05, 2012 at 01:08:22PM -0700, Tony Lindgren wrote:
Just bisected this down in linux-next for breaking booting of
my omap2420 ARMv6 based n8x0..
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -83,8 +83,12 @@ ENTRY(stext)
THUMB(.thumb )
* Russell King - ARM Linux li...@arm.linux.org.uk [121005 16:10]:
On Fri, Oct 05, 2012 at 01:08:22PM -0700, Tony Lindgren wrote:
Just bisected this down in linux-next for breaking booting of
my omap2420 ARMv6 based n8x0..
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
* Tony Lindgren t...@atomide.com [121005 16:27]:
* Russell King - ARM Linux li...@arm.linux.org.uk [121005 16:10]:
On Fri, Oct 05, 2012 at 01:08:22PM -0700, Tony Lindgren wrote:
Just bisected this down in linux-next for breaking booting of
my omap2420 ARMv6 based n8x0..
---
On Fri, 5 Oct 2012, Tony Lindgren wrote:
* Tony Lindgren t...@atomide.com [121005 16:27]:
* Russell King - ARM Linux li...@arm.linux.org.uk [121005 16:10]:
On Fri, Oct 05, 2012 at 01:08:22PM -0700, Tony Lindgren wrote:
Just bisected this down in linux-next for breaking booting of
my
* Nicolas Pitre nicolas.pi...@linaro.org [121005 18:33]:
On Fri, 5 Oct 2012, Tony Lindgren wrote:
* Tony Lindgren t...@atomide.com [121005 16:27]:
* Russell King - ARM Linux li...@arm.linux.org.uk [121005 16:10]:
On Fri, Oct 05, 2012 at 01:08:22PM -0700, Tony Lindgren wrote:
Just
79 matches
Mail list logo
