On Mon, 7 Aug 2000, Adam McKenna wrote:
2) If I do, will it still broken unless I apply the "2.2.16combo" patch?
3) If it will, then how do I resolve the problem with the md.c hunk failing
with "2.2.16combo"?
If I remember correctly, 2.2.16combo was there to make it possible to use
On Mon, Aug 07, 2000 at 08:07:58PM -0700, Gregory Leblanc wrote:
I'm a little verbose, but this should answer most of your questions,
although sometimes in a slightly annoyed tone. Don't take it personally.
There's a difference between being annoyed and being immature. You seem to
have
Hi,
this is my /var/log/messages it doesn't start MD0, Why ?
At this moment 'm using kernel 2.2.13ac12 with last raidtools, what's wrong ?
Best Regards,
Luca Pescatore
Sep 27 15:26:36 test kernel: Detected scsi disk sdb at scsi0, channel 0, id
1, l
un 0
Sep 27 15:26:36 test kernel: SCSI
You don't have to put lilo on the boot partitions. It can go on the MBR. Lilo
needs to point to files on a non-raided partition, not necessarily be on that
partition itself.
Sorry, on the MBR is what I meant...
The following /etc/lilo.conf should work for /dev/sda (substituting
If we don't already have a HOWTO section on this issue, we probably
should add one. We've seen more and more questions on this topic of
late... Just my half-nybble.
On a similar note, wouldn't it be possible to boot from RAID-1/5 using a
similar method if the chunk size was greater than the
--
From: Stanley, Jeremy
Sent: Monday, September 27, 1999 12:00 PM
To: Linux-Raid
Subject: Boot Linear/RAID-1 [was: Root Raid Questions]
[clip]
On a similar note, wouldn't it be possible to boot from RAID-1/5 using
a similar method if
[snip
At 12:00 PM 9/27/1999 -0400, Stanley, Jeremy wrote:
If we don't already have a HOWTO section on this issue, we probably
should add one. We've seen more and more questions on this topic of
late... Just my half-nybble.
On a similar note, wouldn't it be possible to boot from RAID-1/5 using a
On Thu, 16 Sep 1999 [EMAIL PROTECTED] wrote:
Hello -- there is a lot of confusing and incorrect howto's, etc. out there.
I was using raid0 with kernel 2.2.5 just fine. I have upgraded the
kernel to 2.2.12 in an effort to solve a SMP kernel gen problem, and I can
not get raid0 to work at
On Mon, 26 Jul 1999, James Deptuck wrote:
Does anyone have any experiences with particular hardware raid controlers
that they'd be willing to share?
What's the most reliable controler?
I have experience with the DPT 3334 in several production servers.
It may not be the fastest hardware RAID
